[UniHW] DFI 790FX M2R Review, King of AMD is back!

Printable View

Show 100 post(s) from this thread on one page

11-20-2007, 07:16 AM
Lightman

Quote:

Originally Posted by drunkenmaster

is it available anywhere yet, and does anyone know if they are sold through any stores in the UK anymore. was a point you could pick up a dfi from anywhere, even dabs.com , now you can barely find dfi boards and i have no clue why they dissappeared :(

none of the "where to buy" links on the dfi site have anything. i think one company of all the ones listed had a single dfi mobo on. they've just evapourated completely from the uk, which is a shame.

DFI in U.K. shop (more than one :p: )
11-20-2007, 10:20 AM
Starscream

german webshops got it on pre-order atm.

http://geizhals.at/deutschland/a295253.html
184 euro and i bet once more stores get it and once 790FX boards get more widely availeble it will drop another 20 euro.
11-20-2007, 05:34 PM
drunkenmaster

Quote:

Originally Posted by Lightman

DFI in U.K. shop (more than one :p: )

bah, missed that, was another store with one board, cconline, i checked the brands link, which doesn't have dfi till a full list on other page :p

but still, dfi seem very quiet in the uk. everyone on the list of where to buy would have a range of nf4, intel and budget boards in stock, ocuk, dabs, tekheads, basically everyone had them, then it all dried up.
11-20-2007, 09:17 PM
breakfromyou

the SB heatsink looks like it's ready for the allmighty TRANSPIPER!

true?!
11-21-2007, 12:09 AM
Bulldog14

Quote:

Originally Posted by LowRun

Well, i got a board with the warped socket in the days and unlike DFI support in the US they told me they wouldn't take care of the shipping cost, after i mailed them back telling them (in a very polite way) that i didn't understand why it should cost me anything when it was a 100% DFI mistake, they just ignored me. You can't possibly do worst in my opinion unless you insult your customer of course.

Hmmm I look after all such matters and I do not recall such a case. Which board was it? That said I do recall a discussion a few months ago with someone regarding shipping costs. If you require further clarification on the matter you can PM me or email me at support at dfi-europe dot com.
11-21-2007, 12:19 AM
Bulldog14

Quote:

Originally Posted by drunkenmaster

is it available anywhere yet, and does anyone know if they are sold through any stores in the UK anymore. was a point you could pick up a dfi from anywhere, even dabs.com , now you can barely find dfi boards and i have no clue why they dissappeared :(

none of the "where to buy" links on the dfi site have anything. i think one company of all the ones listed had a single dfi mobo on. they've just evapourated completely from the uk, which is a shame.

I won't beat around the bush and imply that our distribution channels in the UK are that great. A few months ago our main distributor, UK side, went bust, and since then getting a reliable partner UK side has been tricky. With regards to the LP 790 board I have just gotten 2 preliminary samples in. One as my reference board and another will be sent to a reviewer. Actual stock will follow in the coming weeks. I set up my sample yesterday with Win Vista and so far so good. Seems a solid board. I'll let you guys be the judge thou after a number of you have and give it a good OC shakedown.
11-21-2007, 06:32 AM
LowRun

Quote:

Originally Posted by Bulldog14

Hmmm I look after all such matters and I do not recall such a case. Which board was it? That said I do recall a discussion a few months ago with someone regarding shipping costs. If you require further clarification on the matter you can PM me or email me at support at dfi-europe dot com.

Thank you for your offer, it's very possible you weren't in charge back then (board was NF2 Infinity, so more years than months) maybe you would have handled the matter in a better way (which DFI USA did in that case). At least dialog seems to have improved so keep up, i may change my mind and buy one of your mobos in the future if i can find one for a decent price which is not easy in France.
11-21-2007, 06:36 AM
drunkenmaster

Quote:

Originally Posted by Bulldog14

I won't beat around the bush and imply that our distribution channels in the UK are that great. A few months ago our main distributor, UK side, went bust, and since then getting a reliable partner UK side has been tricky. With regards to the LP 790 board I have just gotten 2 preliminary samples in. One as my reference board and another will be sent to a reviewer. Actual stock will follow in the coming weeks. I set up my sample yesterday with Win Vista and so far so good. Seems a solid board. I'll let you guys be the judge thou after a number of you have and give it a good OC shakedown.

who was the distributor, can't think whose gone bust recently other than overclock, but it won't be them.

do you have an idea on price in uk, rough dates, i mean, is it not due for a couple of months, or might we see it in a couple of weeks.

one big area where people lose out is, a lot of enthusiasts who buy new top end kit tend to like being part of that first weeks buying so they can help find tricks and ways to overclock better, where it performs best. so its pretty essential to have a new board available on/very close to release of the chip.
11-21-2007, 07:05 AM
ZL1Killa

nice board!!! looks like i'm going to have to get this once it hits the egg (newegg)
11-21-2007, 07:58 AM
hey

nice mobo , but for 3d benches ,i wish it had 4*pci-e :shakes:
11-21-2007, 09:26 AM
mongoled

Quote:

Originally Posted by drunkenmaster

who was the distributor, can't think whose gone bust recently other than overclock, but it won't be them.

do you have an idea on price in uk, rough dates, i mean, is it not due for a couple of months, or might we see it in a couple of weeks.

one big area where people lose out is, a lot of enthusiasts who buy new top end kit tend to like being part of that first weeks buying so they can help find tricks and ways to overclock better, where it performs best. so its pretty essential to have a new board available on/very close to release of the chip.

Could be CPUCity, they went down the pan a while ago, tried to trace the guys, managed to pin down the people they rented the premises from, but they seemed a bit tight lipped about their where abouts.

A shame really as their support was pretty good, and seemed like pretty cool guys

:(
11-21-2007, 05:01 PM
asp6000

Quote:

Originally Posted by hey

nice mobo , but for 3d benches ,i wish it had 4*pci-e :shakes:

4 PCI-e easy.... drivers another story

Not even all games benefit from cross-fire or sli. I'm ready for a new high-end card, not two mid-range cards glued onto one board or 3-4 card setup.
11-22-2007, 12:25 AM
Bulldog14

Quote:

Originally Posted by LowRun

Thank you for your offer, it's very possible you weren't in charge back then (board was NF2 Infinity, so more years than months) maybe you would have handled the matter in a better way (which DFI USA did in that case). At least dialog seems to have improved so keep up, i may change my mind and buy one of your mobos in the future if i can find one for a decent price which is not easy in France.

NF2 Infinity was indeed just before my time. I signed on with DFI from about NF3 onwards.
11-22-2007, 12:33 AM
Bulldog14

Quote:

Originally Posted by drunkenmaster

who was the distributor, can't think whose gone bust recently other than overclock, but it won't be them.

do you have an idea on price in uk, rough dates, i mean, is it not due for a couple of months, or might we see it in a couple of weeks.

one big area where people lose out is, a lot of enthusiasts who buy new top end kit tend to like being part of that first weeks buying so they can help find tricks and ways to overclock better, where it performs best. so its pretty essential to have a new board available on/very close to release of the chip.

Perhaps "wholesale distributor" would have been a better term. The wholesale distributor in question is not one most private individuals would know about. Price of products is always at the discretion of the seller, so I wouldn't care to hazard a guess on prices. Concerning availability I have checked an we expect stock at the start of Dec. Expect the board in the stores within a week or so of that. I suspect that companies such as OCers UK will carry the board.

-DFI Support Europe
11-22-2007, 12:55 AM
Brother Esau

I think I'm gonna get one and do a write up maybe:) D.F.I certainly needs some cheering with all of the bad chain of events the past year.
11-22-2007, 01:01 AM
Brother Esau

Quote:

Originally Posted by ZL1Killa

nice board!!! looks like i'm going to have to get this once it hits the egg (newegg)

Why not get it from Motherboardpro.com they have it at a great price and they are really a bunch of great people to deal with and offer more personable service than New Egg will besides we should support small business in the community and places like New Egg and Tiger Direct get enough of our business..

Heres the link....http://www.motherboardpro.com/DFI-La...ATX-p-404.html

Email Mike and see if you can use the code BrotherEsau for a discount:)
11-22-2007, 07:20 AM
drunkenmaster

Quote:

Originally Posted by Bulldog14

Perhaps "wholesale distributor" would have been a better term. The wholesale distributor in question is not one most private individuals would know about. Price of products is always at the discretion of the seller, so I wouldn't care to hazard a guess on prices. Concerning availability I have checked an we expect stock at the start of Dec. Expect the board in the stores within a week or so of that. I suspect that companies such as OCers UK will carry the board.

-DFI Support Europe

cheers,

don't know why companies can't make that kinda info more available as standard. I mean a quick e-mail to even the inq, but maybe more like hexus to say stock is expected early december, also giving a rrp would help the end user because. plenty of people want to try phenom for the sake of trying something new and will buy on release with whatever board is available unless they know a rough date for a board they really want. likewise, people like ocuk tend to just whack prices up because no one is forcing them to bring them down. uk seems really bad at the moment as companies are rising prices to towards whoever has it highest, rather than the usual cutting prices to match the lowest.
11-22-2007, 10:26 AM
ZL1Killa

Quote:

Originally Posted by Brother Esau

Why not get it from Motherboardpro.com they have it at a great price and they are really a bunch of great people to deal with and offer more personable service than New Egg will besides we should support small business in the community and places like New Egg and Tiger Direct get enough of our business..

Heres the link....http://www.motherboardpro.com/DFI-La...ATX-p-404.html

Email Mike and see if you can use the code BrotherEsau for a discount:)

I emailed motherboard pros and I thank you for posting.

I would love to get this DFI board, but I don't want to be the beta tester, as my system is more of a personal use and fun system , not just benchmarking

LOL. its between this mobo DFI 790fx $260 and the ASUS balls to the wall at $370
11-22-2007, 11:28 AM
Brother Esau

Sent you PM just talk to Mike:) Tell him I sent you over cuz the Code was promoted on XS for Members for D.F.I X38 Mobo but see what he says:D
11-22-2007, 11:33 AM
[XC]Atomicpineapple

Quote:

Originally Posted by cky2k6

another board that will get hyped to no end until all the bugs are discovered and dfi runs away from fixing the issues? yeah, no thanks. this cfx3200 board has left a sour taste in my mouth, as i'm sure intel icfx3200 owners and lp 680i can attest to as well, so i can honestly say, dfi can shove this board where the sun don't shine, i'd rather buy an ecs board... sorry to crash the party, but dfi's true nature has shined through quite a few times.

Or, it could be another NF4 Ultra-D :D
11-22-2007, 11:39 AM
Brother Esau

Quote:

Originally Posted by ZL1Killa

I emailed motherboard pros and I thank you for posting.

I would love to get this DFI board, but I don't want to be the beta tester, as my system is more of a personal use and fun system , not just benchmarking

LOL. its between this mobo DFI 790fx $260 and the ASUS balls to the wall at $370

Beta Tester????? Victor Wang started this thread just like the DFI P35 thread and look at whats going on with DFI breaking records these days!

I can tell you First hand this P35 I have is by far the only worthy motherboard I have owned since moving from my Expert board and DFI excels at AMD:up: and as a working example this DFI P35 is a super bad ass super stable mobo and the Bios are coming hot and heavy and all good for the most part cant really complain or say anything negative at all its right up to DFI worthy name and standard!
11-22-2007, 11:44 AM
Psycho_eddie

1 Attachment(s)

Quote:

Originally Posted by breakfromyou

the SB heatsink looks like it's ready for the allmighty TRANSPIPER!

true?!

When avaible will feature it... seems nice idea hopefully performs well too!!
11-22-2007, 02:16 PM
ZL1Killa

alright... yall got my bank going to this board now. i will wait a while and see what more overclocking does and what yall say. I got a while, as i'm waiting to get my cfx3200m2/g board RMA'd and get a new one so i can get my system back up and running
12-11-2007, 01:35 AM
WKjun

@6400+ Black Edition owners
Hi there, some of you have this powerful CPU! I am going to buy it too. But there still is a lot of confusion about the multiplier. Is the 6400+ B.E. locked? Some sources claim that this CPU is unlocked as the 5000+ B.E.. I doubt this is true.

@DFI-Support Member(s)
First of all congratulations for this board and all other LanParty Products! They are awesome and should be in EVERY PC on this planet!
However I complained too about the availability in the days of Socket939/AM2 in Austria (and Germany). With AM2+ this is over now, because more and more retailers have the 790FX LanParties ready to go for as low as 185€.
There is an error on your DFI-homepage:
You list a retailer in Austria (KTC-Watercool) who is no longer DFI distributor, since years now! The shop owners and I have mailed and posted in your support forum, but no one cared. Please erase the entry.

@all
1. What is your RAM suggestion for this board? At first I wanted to buy the OCZ AM2 Special 4GB Kit (2x 2GB double sided RAM, single ranked, optimized for AM2 memory controller), but it is not abailable any more and would have had only 667MHz CL5-5-5. Now I am looking for a good timed kit 2x2GB or 2x1GB, preferred single sided/ranked with CMD rate 1T possible and at least 1066MHz to be ready for a future Phenom purchase.
2. I am going to buy a 6000+ or 6400+ for two reasons: 1MB cache/core & guaranteed 3,0GHz/3,2GHz without OC). Would you prefer the 6000+ EE (89W) or 6400+ (125W) for an attempt to reach 3,4+ GHz?

Thank you guys and thanks for this informative review!
12-18-2007, 08:03 AM
ZL1Killa

the 6400+ BE is not unlocked. it is stuck at a 16x multiplier....which really do you need more... that paired with 280fsb... uh yeh... LOL...4480mhz

guys, how is this baord so far.. I have seen BrotherEasus review..and this one

what are the NB and SB temps?

Show 100 post(s) from this thread on one page