Sice it looks like the HR 03 will be a month at least.
What do you think (and has it been done??), using the Zalman VF 1000 cooler with the ZM RSH88 heatsink? It looks viable. It rates close to the HR 03 setup for cooling.
Anyone try this yet?
Printable View
Sice it looks like the HR 03 will be a month at least.
What do you think (and has it been done??), using the Zalman VF 1000 cooler with the ZM RSH88 heatsink? It looks viable. It rates close to the HR 03 setup for cooling.
Anyone try this yet?
You check out the comparsion of the hr-03 + and the zalman vf 1000 here. And heres a link.
http://www.xtremesystems.org/forums/...1&d=1191554463
http://www.xtremesystems.org/forums/...ighlight=HR-03
So the HR 03 is best, thanks for the review, seen that one a while back, didn't think it was that much of a diff. But the HR03 Plus doesn't fit. I guess it's just the backplate that doesn't line up? I can easily make a frontplate/backplate to hold the cooler? All it is metal plates with the holes that line up right?
I have access to a machine shop and perfect metal. You can wiretie a 120 mm fan to it too ya?
This is good since I only have the 8800GT and nothing else. My other rigs are all AGP LOL! This'll give more time for others to come out with different heatsinks for this card. But the HR 03 is going to be tough to beat.Quote:
Originally Posted by Conumdrum
For those who used the Accelero S1, did you have to get any additional heatsinks or did AC provide enough heatsinks to cover everything?
It comes with 8 ramsinks and 2 vreg sinks, but the vreg sinks isn't made for 8800GT.
Well it seems no one is intrested in knowing or testing the stock 7900GTX on a 8800 GT, i will buy them two and see if i can make it fit!
wish me luck!
Max.-
it doesnt fit i have a 7900gtx aswell as a 8800gt
I'm getting a VF900 for my 8800GT today. Over in sweden some users repor great results with that one. And its cheap too. :D
AC S1 with Turbo Module=Best option for the price.
So finally, ZM-RHS88 fit or not? it would be interesting to use it with the VF1000 ;)
Im using one on my 8800GT as well and it looks fine so far, the only comment I would make is be careful when you are clamping down the main GPU sink since I have heard reports that the 8800GT's core is above the shim and you could possibly crush it if you use too much force.Quote:
Originally Posted by Viktor
ambient and load temps? I'd probably need to find some tiny sinks for the little guys in the back tho.
So should I order some more sinks for those or will it just work fine?Quote:
Originally Posted by Scyth3
Edit: NVM, going have to get some more sinks going off of the Thermalright HR03 Installation page.
Does Zalman RHS88 fits on 8800GT?
am very interested on it and also i would like to buy the VF1000 model too... Maybe someone here has this combo because the GT fan is everything less than quiet (From 50% to 100% its very noisy )
Where does it not fit? Is there a way to make it fit? We aint running stock stuff here you know ;)Quote:
Originally Posted by jay_lee300
I got myself TT ND1 for like $25 :)
Here is GoldenTiger's pic with cards in SLI (you have to bend fan pins a bit but that is easy):
http://img139.imageshack.us/img139/5736/8800nd12tc5.jpg
that HS looks like my old Sapphire's Radeon X800XL stock cooler.
I see you are using the RHS88 as well.Quote:
Originally Posted by Brian MP5T
I know this is recommended but can I install the VF1000 without this RHS88? I am thinking to use just the little memory heatsinks that comes with the VF1000?
So, any results with Accelero S1? Do I need any more heatsinks? What are the temps?
Would the Arctic Accelero X1 fit?... lets take a look:
8800gt naked:
http://www.vr-zone.com/articles/Nvid...3.html#Scene_1
7900gto/x naked:
http://www.overclockers.co.nz/ocnz/r...ile=grease.jpg
Accelero:
http://www.arctic-cooling.com/downlo...tr_aclrox1.pdf
http://www.virtual-hideout.net/revie...accelero42.jpg
I'm not sure, would the memchips on the DVI side be a bit to far away?
Maybe there's a photoshop "expert" here who can make a nice overlay?
Why i'm asking it? Its a pretty big good blok and it only costs 10 euro's :D
Quote:
Originally Posted by MIS3
Yes, It works because I have it on my GT..
Just ordered the Thermalright HR-03 GT from frozencpu.com. Thought it came with ramsinks but I'll have to buy them seperately.
they should come with ramsinks and VRM sinksQuote:
Originally Posted by Rob94hawk
I hope so. I'll let you guys know. It should be here in a few day.Quote:
Originally Posted by LuckyNV