I lost Car Low and Car high with SINGLE XFX 8800Ultra....

Really? I am a huge MX1 and now MX2 fan but have no experience with DICE and LN2. What other options are there for those temps? Liquidpro?

Sorry i dont know.
Ceramique i know works, and is available, and good, so i use it :)

Well that is enough to know right there I suppose. I guess next round I will have to get some MX2 and Ceramique. What types of temps have you guys got on Ceramique? I haven't heard anything from the notables like Hipro and Kingpin.

Quote:

---

Originally Posted by MaK2000

Well that is enough to know right there I suppose. I guess next round I will have to get some MX2 and Ceramique. What types of temps have you guys got on Ceramique? I haven't heard anything from the notables like Hipro and Kingpin.

---

ONLY Arctic Ceramique in this worlds is supposed to work under subzero temps and don't lose it's carasteristics at ~ -195*C (if I remember well)......
ALL others, loses their carasteristics under subzero..... ;)

Ahhh........I found some old tests of mine at only -22*C....IF you go lower, you're screwed with the others :D

http://www.thelab.gr/images/Hipro5/T...l_Day0_png.png

http://www.thelab.gr/images/Hipro5/T...l_Day1_png.png

http://www.thelab.gr/images/Hipro5/T...l_Day2_png.png

http://www.thelab.gr/images/Hipro5/T...l_Day3_png.png

http://www.thelab.gr/images/Hipro5/T...l_Day4_png.png

Thank you very much Hipro. Those results help a lot. This is the stuff right?

http://www.newegg.com/Product/Produc...82E16835100009

Your charts show basically Arctic Silver products other than Shin Etsu. Has anyone tried MX products? I figure so but have to ask.

Quote:

---

Originally Posted by MaK2000

Thank you very much Hipro. Those results help a lot. This is the stuff right?

http://www.newegg.com/Product/Produc...82E16835100009

Your charts show basically Arctic Silver products other than Shin Etsu. Has anyone tried MX products? I figure so but have to ask.

---

Yes that's the one..... It also comes out at 12grams too (a bigger one).... :)

You have to test it by yourself.....OR look at companie's data for it's carasteristics IF they have tested under subzero..... ;)

Thank you again. Guess my night is done. You cleared all of my questions.

I thought of one more thing on my way to bed. Are you using Ceramique for CPU, GPU, and VGA mem? Also, wanted to say that Youngpro and T_M have some experience on their own. Didn't mean any offense. I had never heard of them until I did some searching.

No offense taken. I just looked at your post count :P
Hehe joking.

I never put TIM on my memory, why would you want/need to?

Quote:

---

Originally Posted by hipro5

I found some old tests of mine

---

That should be referenced somewhere :)

Quote:

---

Originally Posted by k|ngp|n

These new chips clobber the conroe in lobbies/cars. 5400mhz conroe on 975x/forceware drviers was something like 520fps LH. 2001 eats up cache..

---

talk about eating up cache

check out this run single 8800GT 700/999 and yorkfield at 4.8Ghz

LH 541FPS :shocked: :D

Quote:

---

Originally Posted by dinos22

http://img134.imageshack.us/img134/8...42600mhdn3.png

---