Printable View
Hipro5 has tested it with 1401 bios build 28/11, pm him or pmp if you want the latest bios, I only got 26/11 build :rolleyes:Quote:
Originally Posted by OBR
Keep me posted OBR what gives...
That would be fab pmp if we have unlocked multi, finally the Striker might justify its extreme price tag over the reference boards :up:
This is a good news :)
any news? I bought DDR3 modules and Maximus Extreme ... i think my Striker will be retired ... i dont want wait for Yorkfield support many weeks/months ...
Just wanted to bump to see if anyone has any news on the 1401 bios, (ie, estimated release date et al). Been holding off some swaping of components/rebuilding on it (assuming it works that is. ;) )
Hey pmp, can you provide any news?
And any news about the latest revision of BIOS 1401?
///
I would very much like the latest 1401 bios. Would you please send it to me or post a link?
thanks so much.
I only have 26/11 chaps no later :( you can try that but dunno if it will work
http://users.pandora.be/OAP/Striker/
Hello everyone today I tried a version of BIOS 1401 build 28/12/2007 available on the site ftp.asus.com.tw yorkfield but is not yet supported strange as ever in beta 28/11 and 18/12 worked with a multipler 9?
Build done with nVidia permission :ROTF: , is called 1502. I'm looking 24/7 FSB sweetspot for Yorkfield cored CPUs, will update you soon.Quote:
Originally Posted by Don_Dan
Due to upgraded ROMSIP table, multiplier selection for Extreme CPUs works like it should, EIST as well.
default 9x in C1 state [6x]
http://img174.imageshack.us/img174/5089/9c1hy6.th.jpg
http://valid.x86-secret.com/show_oc.php?id=296424
default 9x in C0 state
http://img142.imageshack.us/img142/9748/9c0dj4.th.jpg
http://valid.x86-secret.com/show_oc.php?id=296422
non-default 7x in C0 state as well as FSB400
http://img293.imageshack.us/img293/7...babatn0.th.jpg
http://valid.x86-secret.com/show_oc.php?id=296481
7.5x N/2 multiplier as well as FSB400
http://img50.imageshack.us/img50/1955/75pp5.th.jpg
http://valid.x86-secret.com/show_oc.php?id=296484
non-default 8x in C0 state as well as FSB400
http://img178.imageshack.us/img178/4548/8xeb4.th.jpg
http://valid.x86-secret.com/show_oc.php?id=296507
8.5x N/2 multiplier as well as FSB403
http://img341.imageshack.us/img341/490/5555th4.th.jpg
http://valid.x86-secret.com/show_oc.php?id=296532
more to come...
Why so low frequencies with this BIOS build 1502? I go with 1401 28/12 9x multiplier with EIST enable to 3621! Mhz! with FSB 1610 Mhz and 10x multiplier 4016 Mhz 1610 FSB mhz and more... in test
But when this build be available to the public?
Thank you so much! :up:Quote:
Originally Posted by pmp
Good job PMP any idea of release as I have a german friend on the hardwareluxx forum that cannot boot his Striker with current 1401 bios from the FTP, his Q6600 works though , but as soon as he pops in the QX it stays dead...
Ladert6 are you using a mobo with soldered bios or the older version ?
No my BIOS in socket because there is a Striker Extreme with the BIOS chip soldered?Quote:
Originally Posted by Leeghoofd
I have 2 mobo striker extreme always rev 1.00g but one is older but always bios be extractable.
Bad history of this new mania of solder chips BIOS!
X PMP
Help for the BIOS you are the only PMP!
I think situation get clear within next 14 days.Quote:
Originally Posted by Leeghoofd
For now, 1502 has a little bug with ROMSIP upgrade procedure, which may cause BIOS image to damage, so it could not be released yet. I flashed it twice yesterday due this.
Your friend problem - at which 80h code does it stop ?
Please stop trolling me. I'm not Obi-Wan. :DQuote:
Originally Posted by LADert6
If i would something to say/share i for sure do that. Please do not quote screenshots also.
I've asked him he will look at it, thx for any help, he tried everything already, booting with generic ram,one dimm, reset cmos , battery trick, reversed battery,... doesn't post...Quote:
Originally Posted by pmp
Well you might not be Obi-Wan :ROTF: pmp but the Striker community adores you :)
Edit : It's the dreaded CPU INIT POST, his sytem specs are in this link Pmp
CPU INIT displayed on LCD poster is kinda useless, cause it's more than 15 different codes. However, could he check ANY other CPU ?
What is possible, is just LGA socket damage. I've seen several boards with damaged CPU socket, which were not able to run any other CPU. This damage was caused due to excessive heat, quite possible with Kentsfield's.
Clean LGA pins, put Yorkie, fasten socket and try to run without cooler. From technical sense, any BIOS from 1305 would start with Yorkie (ofc limited) anyway.
Yep my thoughts exactly sir though his E6600 now in the board runs fine, he's on 1303 bios... I'll let him reupdate to 1305... and maybe leave battery out to make sure the bios resets correctly ?
thx for the reply pmp
but, is possible to have the 1502 bios or not? thanks ;)
Hi guys, any news about the latest revision of BIOS 1502 or later?
thanks