Xs @ Idf 2007

Printable View

Show 100 post(s) from this thread on one page

09-16-2007, 06:28 AM
rozzyroz

Quote:

Originally Posted by FUGGER

My demo has been moved center stage, I am a guest speaker.

Many problems atm, -20c cold bug combined with the max 1.2v core limits my OC to no more than 33% OC. That and the old problem of cores locking up is making it near impossible to get a single bench done.

is that motherboard related (the 1.2v), or is it a limitation of the cpu? if it is motherboard related, maybe you can pull some strings and get a quick bios fix... you could probably get the 33% oc with just air cooling? i wanna think that a 33% oc is still in the 4.0-4.3 ghz range?... i know you cant answer that yet.

with only 1.2v i bet you could get the same oc on air?
09-16-2007, 10:07 AM
EnJoY

OH NO!@#@ THE DEMO IS A DISASTER!#! CHILDREN EVERYWHERE WILL CRY!@!!

Sorry, I'll get a hold of myself. Good luck getting it all sorted out Charles. ;)
09-16-2007, 10:15 AM
afireinside

1.2v Wtf?
09-16-2007, 10:20 AM
Fr3ak

It's 45nm. So 1.2V is like 1.35V on 65nm. With that voltage you can get good results on air. You better wear a mask Fugger, in case people point fingers at you and start laughing.
09-16-2007, 10:24 AM
Movieman

Nah, I have faith that Charles will put on a good show.:up:
09-16-2007, 10:48 AM
Don_Dan

Reading that I wonder what the stock voltage of those 45nm CPUs will be... :confused: Anyone?
09-16-2007, 11:02 AM
Dualist

Hope your gonna kick someone's butt about the coldbug before the day.
If they don't get it fixed take your old gear and show 'em it beats the new stuff :D

If it does that is :p:
09-16-2007, 11:05 AM
EnJoY

Quote:

Originally Posted by Don_Dan

Reading that I wonder what the stock voltage of those 45nm CPUs will be... :confused: Anyone?

-.95v
09-16-2007, 11:12 AM
Fr3ak

Quote:

Originally Posted by Dualist

Hope your gonna kick someone's butt about the coldbug before the day.
If they don't get it fixed take your old gear and show 'em it beats the new stuff :D

If it does that is :p:

You know that Intel does not develope new CPUs with priority to the coldbug, right? I am pretty sure most people at Intel don't even know what the coldbug is. Have a look what Intel writes about the operating temperature of C2Ds. I am almost certain, it doesn't say -130 to 50C ;)
09-16-2007, 11:14 AM
Planet

Some other reports of 45nm chips report a -80C bug and very limited overclocks. Still dont forget these are still super early samples.
09-16-2007, 11:23 AM
afireinside

Quote:

Originally Posted by EnJoY

-.95v

If 1.2v 45nm is equal to 1.35v 65nm then uh wouldn't .95v 34nm be equal to 1.1v 65nm? I thought 1.35v was like stock for 65nm? And last I checked stock voltage does NOT get "good results" on anything.
09-16-2007, 11:25 AM
SiGfever

Kick some Intel Arse. :up:

"To go where no man has gone before." Now this is very intriguing. :scope:
09-16-2007, 11:35 AM
Fr3ak

The low end models oc over a GHz on stock vcore, so I wouldnt call that bad. Thats more than a 50% OC.

Stock vcore on some C2Ds is 1.25V btw. That depends on the CPU and mainboard used.
09-16-2007, 11:37 AM
Movieman

Let's just say that I think we will all be very pleasantly surprised!:wasntme:
09-16-2007, 11:45 AM
Dualist

Quote:

Originally Posted by Fr3ak

Have a look what Intel writes about the operating temperature of C2Ds. I am almost certain, it doesn't say -130 to 50C ;)

'tis a shame though, lol :rofl:
09-16-2007, 11:50 AM
Nosfer@tu

Quote:

Originally Posted by FUGGER

My demo has been moved center stage, I am a guest speaker.

Many problems atm, -20c cold bug combined with the max 1.2v core limits my OC to no more than 33% OC. That and the old problem of cores locking up is making it near impossible to get a single bench done.

Damm Motherboard, Kinc dosent have problems with the X38 from Asus. So yours must be Intel :(
Using heaters ?

Quote:

Originally Posted by dinos22

yeah well with all money spent on the benching stuff and more money planned on cascades and things this doesn't sound good at all lol

Lets just hope it is the motherboard :) Yorksfield likes cold :)

Quote:

Originally Posted by Yoxxy

Yorkfield coldbug higher than conroe, but it is -70 to 75 degrees C.

Works fine on single stage.

We dident have any problems either on single stage.
09-16-2007, 12:16 PM
EnJoY

Quote:

Originally Posted by afireinside

If 1.2v 45nm is equal to 1.35v 65nm then uh wouldn't .95v 34nm be equal to 1.1v 65nm? I thought 1.35v was like stock for 65nm? And last I checked stock voltage does NOT get "good results" on anything.

LOL, did you miss there I typed the negative symbol? "-" ;)
09-16-2007, 12:56 PM
Supertim0r

it's probably an Abit X38...
09-16-2007, 01:06 PM
Dualist

Or maybe X48..????
09-16-2007, 01:10 PM
strange|ife

well i would think itwould be an intel board. 1.2v?stock thats insane

have fun fug
09-16-2007, 01:14 PM
ownage

Probably Intel Bad-Axe 3 benching! :D
09-16-2007, 01:31 PM
strange|ife

I'll rent out a couple of cruise america RV's. rollin down with xs with class:D
09-16-2007, 01:33 PM
Bigchrome

Quote:

Originally Posted by Fr3ak

You know that Intel does not develope new CPUs with priority to the coldbug, right? I am pretty sure most people at Intel don't even know what the coldbug is. Have a look what Intel writes about the operating temperature of C2Ds. I am almost certain, it doesn't say -130 to 50C ;)

Why would you let it get as high as 50 degrees?:ROTF:
I hope this isn't the BX3 cus I really wanted that board and -20c coldbug=joke.
09-16-2007, 01:41 PM
EnJoY

Quote:

Originally Posted by Bigchrome

Why would you let it get as high as 50 degrees?:ROTF:
I hope this isn't the BX3 cus I really wanted that board and -20c coldbug=joke.

What would the board have to do with coldbug?
09-16-2007, 02:02 PM
perkam

Quote:

Originally Posted by EnJoY

What would the board have to do with coldbug?

Enjoy: goin' round wrapping up nooblets :bows: :up:

Perkam

Show 100 post(s) from this thread on one page