new core temp 0.95.4 beta

Printable View

Show 100 post(s) from this thread on one page

09-03-2007, 10:09 AM
AcuraDC5

So for a G0 Q6600, CoreTemp 0.95.4 should show accurate temps, meaning I DON'T have to add 15 to the temps correct?
09-03-2007, 01:06 PM
Infa

yeah thats correct :)
09-03-2007, 01:13 PM
largon

Yup, no more n+15ºC.

Instead you need to add about 10ºC.
That is if you want something close to the real temps... :p
09-15-2007, 09:53 AM
egraphix

Quote:

Originally Posted by KiD0M4N

Actually there is a way to make Coretemp work in Vista X64 without having to disable driver signing requirement.

Download this file: http://downloads.erodov.com/c/o/r/co...4-VistaX64.zip

xtract this to your favorite directory (say C:\CoreTemp)

Just make sure before you start the actuall "CoreTemp.exe", you run "coretemp-startup.bat"

This will load the CoreTemp driver and thus will allow CoreTemp to function normally without having to disable driver signing :)

Original thread here: http://forums.erodov.com/showthread....5559#post15559

Tell me if this works.

Regards,
Karan

OMG thank you soo much for this... i've been trying for hours now to get coretemp working-google ended up being not very usefull.

worked like a charm.!!! :up:
09-15-2007, 01:42 PM
XS Janus

On my P5B-DX the 6400 shows 36-40 in idle

While my new celeron 420 1.6ghz (single core ) shows 44 before and after lapping.

Something is fishy here...

Oh and TAT doesn't work with celeron in; says "Invalid processor" ---stupid
09-15-2007, 02:14 PM
KALISPIMENTA

Try the EVEREST Ultimate Edition 2007 4.10.1128 Beta and compare.
http://downloads.guru3d.com/download.php?det=1734
09-15-2007, 02:58 PM
p8ntslinger676

it doesnt work for me, it said "Driver failed to load"

oops never mind i just didnt read :p:
09-16-2007, 11:58 AM
ruff97

Quote:

Originally Posted by KiD0M4N

Actually there is a way to make Coretemp work in Vista X64 without having to disable driver signing requirement.

Download this file: http://downloads.erodov.com/c/o/r/co...4-VistaX64.zip

xtract this to your favorite directory (say C:\CoreTemp)

Just make sure before you start the actuall "CoreTemp.exe", you run "coretemp-startup.bat"

This will load the CoreTemp driver and thus will allow CoreTemp to function normally without having to disable driver signing :)

Original thread here: http://forums.erodov.com/showthread....5559#post15559

Tell me if this works.

Regards,
Karan

It did not work for me
09-16-2007, 01:00 PM
leo_bsb

any mirrors for download?
the zerbrains isn't working for me.
09-16-2007, 01:03 PM
Knight

Anyone one know why core temp crashes sometimes? It isn't just with this beta version. It has done it to me with the last one as well.
09-16-2007, 01:41 PM
Bigchrome

Sub zero temps a possibilty with this sometime soon?
09-16-2007, 01:51 PM
KALISPIMENTA

Quote:

Originally Posted by Knight

Anyone one know why core temp crashes sometimes? It isn't just with this beta version. It has done it to me with the last one as well.

Mine crashes when i launch another cpu temp. monitor software
09-16-2007, 02:12 PM
XS Janus

Judging by this thread and all things considered Core temp is crap...
Free crap, but crap nonetheless. :D
09-16-2007, 02:17 PM
RPGWiZaRD

Honestly I haven't had any issues with core temp and it's the only software that can display somewhat accurate temps of my E6750 so I don't complain.
09-16-2007, 02:53 PM
Rilla927

2 Attachment(s)

Guys, I have been wondering all week if these temps were accurate. I have Q6600 G0 running stock on a open air station. Do these numbers make sense to anyone? With these shots I'm browsing the internet. I don't know how to change the Tjunction to 85 like I see a lot of others. I'm new to all of this so be gentle:D
10-02-2007, 03:53 AM
giorgos th.

you dont need to change the Tjuction to 85C cause you have a G0 cpu,which has a Tjuction of 100C..
BTW with the config in my sig and room temp 25-26C is 33C idle-55C load any good?
Thermal paste is MX-1 and was applied like 10' ago..
10-02-2007, 04:32 AM
Caparroz

Quote:

Originally Posted by leo_bsb

any mirrors for download?
the zerbrains isn't working for me.

Não sei por que, mas o site desse cara sempre esteve bloqueado pra IPs brasileiros. Entre via proxy que dá certo.

Sorry about the portuguese. I was helping a fellow brazilian.
10-02-2007, 05:58 AM
KALISPIMENTA

Nao ha problema
10-02-2007, 06:22 AM
Rilla927

Quote:

Originally Posted by giorgos th.

you dont need to change the Tjuction to 85C cause you have a G0 cpu,which has a Tjuction of 100C..
BTW with the config in my sig and room temp 25-26C is 33C idle-55C load any good?
Thermal paste is MX-1 and was applied like 10' ago..

Thank you:D
10-02-2007, 12:27 PM
`danny

I wonder if he'll ever release a core temp with a signed driver so I can use it again on Vista x64
10-02-2007, 02:09 PM
doakh

Quote:

Originally Posted by `danny

I wonder if he'll ever release a core temp with a signed driver so I can use it again on Vista x64

I found workaround under Benchmarking.

http://forums.erodov.com/showthread.php?p=15559
10-02-2007, 03:13 PM
Kenetixx

Still doent work on 64bit vista, who needs temps anyway if it dies just buy a new one :P
10-02-2007, 04:48 PM
`danny

Quote:

Originally Posted by Kenetixx

Still doent work on 64bit vista, who needs temps anyway if it dies just buy a new one :P

I know speedfan works fine and it displays same temps as Core Temp
10-02-2007, 05:04 PM
MikeB12

or the link doakh posted... which sarcasm btw mysteriously causes core temp to work in v64... not that anybody ever actually reads these things though, since it's been posted here about oh "multiple times" in maybe "multiple threads"... ommm since August... http://www.scootplace.net/smiles/original/205.gif
10-02-2007, 06:37 PM
Kenetixx

tried that way as well and what do you know.......BSOD every time the .bat file runs LOL

Show 100 post(s) from this thread on one page