It has started...

Printable View

Show 100 post(s) from this thread on one page

07-03-2007, 05:03 AM
eva2000

dam nice mate... see ya went back to good old Striker board :D
07-03-2007, 05:26 AM
[XC] Hicks121

You never stop amazing me Hipro!!! Kepp it up man!!!:up:
07-03-2007, 05:45 AM
WesM63

You are my Hero! :bowdown:
07-03-2007, 05:56 AM
xbrian88

:shocked: :shocked: :slobber: :eek2: :worship: impressive hipro, impressive.:shocked: :shocked:
07-03-2007, 05:59 AM
Celcius

Awesome scores :clap:
07-03-2007, 06:07 AM
dinos22

Quote:

Originally Posted by hipro5

Same manufacturing company for us and them.... ;)
Nah, I have lost that 2k3..... ;) :)

SEVENTEAM ELECTRONICS?
07-03-2007, 06:09 AM
dinos22

Quote:

Originally Posted by hipro5

I lost my 1st precius IN9 just like that with code 90 and no boot next day...My second one died after modding it and insulated it (maybe I was in a hurry and I did something wrong).....I killed my third one while trying to replace it's heatsinks.....One Digital PWR Mos-Fet was broke (it's one corner- too delicate) and no VCore on it....I dissapointed and I wanted a mobo with "classical" PWR Mos-Fets to play with....So to go with the EVGA?....No thanks, been there/done that....So I desided to give Striker a second go.....and here we are..... :)
IF IN9 was with "classical" PWR Mos-Fets, it whould be No1 for sure (except that code 90 all those ABIT mobos have related to uGuru chip... :( )

it's the digital PWM that you do not think can handle the loads isn't it :p: just admit it :D
07-03-2007, 07:06 AM
k|ngp|n

Awesome work as ALWAYS my friend :clap:
I wondered how the 05 was with ULTRA's and new forceware, not bad.
07-03-2007, 07:20 AM
Fr3ak

Very impressive George! Thats the way to go!! :D
07-03-2007, 08:05 AM
Zannema

Good job hipro, very impressive:up:
07-03-2007, 11:31 AM
NH|Delph1

That's one sexy power supply :D :slobber:

//Andreas
07-03-2007, 01:27 PM
bigdaddy25fb

A true master of his craft...nice PSU :)
07-03-2007, 01:58 PM
Pedro Rocha

Amazing results as usual :clap: :clap:

And your setup is so Hipro5 style: full of mods, full of voltage and (of course) full of Delta fans :D

What speeds (core / shader / mem) and voltages for the Ultras???

Can you run the 8800 Ultras with PCIe at more than 130mhz?? with the 8800GTX used to run Nature easy at 145mhz or more, but the Ultras start to freeze when I use more than 130 :confused:
07-03-2007, 08:30 PM
Morgoth

Brilliant work!

Good to see you back in action :D
07-03-2007, 10:06 PM
hipro5

Thank you gentlemen....:D

PCI-E was/is at 135MHz......I can do it at 140MHz but I have to clock the VGAs a bit lower though.....:(

Voltages on VGAs are 1.65VGPU.....Yes I have a Vdroop on them thought it's a bit better than they where default after the mods....I haven't searched yet for a Vdroop mod for them or their OverPower/OverCurrent Protections but I will and I'll report back.....
Pedro if you look at 2k3's photo, you'll see the shaders' clocks at 972MHz core....At 1035MHz, I think that they were over 2580MHz....

@ dinos22: :D Digital PWR yes sucks but it can handle a Dual CPU....As for the QUAD?....Don't ask.......I had ~43 - 47*C on each Digital Mos-Fet with the Dual @ 5300MHz and 1.93VCore into bios and with the QUAD @ 5000MHz and ONLY 1.7VCore I had ~117*C.... :(

Quote:

Originally Posted by k|ngp|n

Awesome work as ALWAYS my friend :clap:
I wondered how the 05 was with ULTRA's and new forceware, not bad.

I think with a little puss on CPU and on VGAs, I can do over 34k....;)
07-03-2007, 10:47 PM
dinos22

Quote:

Originally Posted by hipro5

@ dinos22: :D Digital PWR yes sucks but it can handle a Dual CPU....As for the QUAD?....Don't ask.......I had ~43 - 47*C on each Digital Mos-Fet with the Dual @ 5300MHz and 1.93VCore into bios and with the QUAD @ 5000MHz and ONLY 1.7VCore I had ~117*C.... :(

:eek: :eek: :eek: :shocked:
07-03-2007, 11:48 PM
PanteraGSTK

Quote:

Originally Posted by hipro5

@ dinos22: :D Digital PWR yes sucks but it can handle a Dual CPU....As for the QUAD?....Don't ask.......I had ~43 - 47*C on each Digital Mos-Fet with the Dual @ 5300MHz and 1.93VCore into bios and with the QUAD @ 5000MHz and ONLY 1.7VCore I had ~117*C.... :(

I think with a little puss on CPU and on VGAs, I can do over 34k....;)

I bet you can get over 34k as well. It sucks that the mosfets get so hot with a quad. Regular vs. digital...Hmmmm... We need to find a quad oc motherboard that can handle the extra power the quad requires. Apparently, the striker can hold up to the quad, but what about single card. I want to see what you can do single card wise George. Your previous choice with a quad has been a p5w or a p5b (if I'm remembering correctly) so I'm interested in seeing which you choose. I think a p5k deluxe or IP-35pro is what you may have (speculation on my part, but I thought you had posted scores with a p35 motherboard of some sort). Like I said. Single card scores with quad at 5ghz+ is what I'm expecting. You haven't disappointed yet. You and Vince are good at keeping a crowd.:up:
07-04-2007, 12:10 AM
hipro5

Quote:

Originally Posted by PanteraGSTK

I bet you can get over 34k as well. It sucks that the mosfets get so hot with a quad. Regular vs. digital...Hmmmm... We need to find a quad oc motherboard that can handle the extra power the quad requires. Apparently, the striker can hold up to the quad, but what about single card. I want to see what you can do single card wise George. Your previous choice with a quad has been a p5w or a p5b (if I'm remembering correctly) so I'm interested in seeing which you choose. I think a p5k deluxe or IP-35pro is what you may have (speculation on my part, but I thought you had posted scores with a p35 motherboard of some sort). Like I said. Single card scores with quad at 5ghz+ is what I'm expecting. You haven't disappointed yet. You and Vince are good at keeping a crowd.:up:

For SINGLE VGA and QUAD, I chose ABIT AW9D-MAX without a doupt.....THE BEST and it only has 4 phase pwr....NO DROOP at all with the QUAD @ 5200MHz+ or 5050MHz 3D at 1.73VCore..... ;)

Here's an older bench of it..... ;)

http://service.futuremark.com/compare?3dm06=1861082

.
07-04-2007, 12:35 AM
PanteraGSTK

Quote:

Originally Posted by hipro5

For SINGLE VGA and QUAD, I chose ABIT AW9D-MAX without a doupt.....THE BEST and it only has 4 phase pwr....NO DROOP at all with the QUAD @ 5200MHz+ or 5050MHz 3D at 1.73VCore..... ;)

Here's an older bench of it..... ;)

http://service.futuremark.com/compare?3dm06=1861082

.

7827 cpu marks! Yea, I agree that would be the best. 5200 with a quad is just amazing. I bet you are eager for x38 since it is the equivalent to 975 as far as "enthusiast" chipsets go. But it will let you have SLI or so the speculation says. That would be the ultimate chipset if indeed it supports SLI. That is what I am waiting for. Good luck with the rest of your benching.
07-04-2007, 12:52 AM
crotale

Amazing work George!

I especially like the mods on the graphics cards :D
07-04-2007, 04:20 AM
giampa

you always succeed to astonish to me ... :clap:

great... :up:
07-04-2007, 05:14 AM
cozwin

little bit of self advertisement on the psu there :P, im sure people would buy them from you just because your name is on it heh.
07-04-2007, 06:07 AM
lowfat

Very nice scores, glad too see you back. When will be be seeing some 3D06? And are you going to be selling similar PSUs? It just looks way to professional for self usage.
07-04-2007, 06:12 AM
hipro5

Thank you guys....

Yes this PSU is going to be retail soon....Best so far as for me, is that it can handle ALL this load without a glitch....And it asks for more...... ;) :D
BUT this thread is not for the PSU.... ;) PSU will have a thread on it's own soon.... ;)

2k6.....tomorrow.... ;)
07-04-2007, 09:18 AM
Philly_Boy

WOW :shocked: ....great clocks on the quad and nice scores to match....we wait with baited breath for the 2K6 benchies...

The mods on the Ultra's look sweet. Will you publish a guide detailing those mods? I am acquiring a set of Ultra's this week and would like to mod them like you've modded yours. Do you mod the bios to start the shaders lower like we did on the 8800GTX's?

I too am waiting on the X38 board in hopes that it supports SLI. That would give it great potential for clocking a quad.

Show 100 post(s) from this thread on one page