Need RAM cooling recommendation plz...

Quote:

---

Originally Posted by msgclb

Boy is that ugly.:D



I have a 80mm fan on my memory just like N H O but I'm using double-sided tape. It's listed as a Hi-Temp/Hi-Strength Supermount tape. I got it from RS but I believe it's also called Sekisui #5760 double-sided adhesive in Europe. I cut a piece the size of the center of the fan, applied it to the fan and then pressed it against my memory. It hasn't fallen off yet!:D

I've also attached a 50mm fan to the NB using the same technique.

---

hehehehe.. I'm proud of it.. :D

Eva2000, I have Tracer 8500's as well, do you suggest running them naked if proper air cooling is used?

has anyone tried to get the thermalright mem coolers to work with 4 sticks?

Quote:

---

Originally Posted by godsgifttoearth

has anyone tried to get the thermalright mem coolers to work with 4 sticks?

---

Won't work ... even thermalright specifically claims they are for dual systems only ...

Go with the Thermaltake spirits ... they're almost as good and have a better mounting system to boot.

Ok so where can i get those standoff screws? i need like 20 to get it high enough lol and I live in Toronto.

Quote:

---

Originally Posted by vld

Ok so where can i get those standoff screws? i need like 20 to get it high enough lol and I live in Toronto.

---

http://www.frozencpu.com/products/34...1161_0202.html

theres some, they should ship to canada as well. I am not well versed in Canadian suppliers but thats a start, if your like me you have bought at least 4 different PC cases that all came with standoffs so you have a gigantic bag of them :)

So the mobo standoffs used were just screwed into the existing "mobo" standoffs used to hold up the board, right? I wonder if I could fit a 120 like that...maybe angled.

i second the spot cool, had mine for a couple of months, works great for memory, or SB.

i have an asus PWM cooler just ghetto stuck between the fins on the heatsink up top. looking to get more air from side duct, problem is finding a low profile enough fan, with the tuniq in my case.

my cooling is weird, blowhole, front intake, rear intake, side sexhaust near Vid card. soon to add side instake sorta of above NB/CPU area to get more air to the middle of the board parts.

the lianli case comes with rear intake standard, and is recommended. ive tried it traditional way, and intake way..intake is better

Have u heard about these?
http://www.overclockers.ru/images/ne.../10/ram_01.jpg
Thermaltake V1 RAM Cooler