Watercooling by Malik

Printable View

Show 100 post(s) from this thread on one page

05-14-2007, 03:03 PM
Grinch

Quote:

Originally Posted by RealTelstar

Beautiful setup :)

Agree 100%

Without question 1 of my favorites that I have EVER seen...:woot: :toast: :clap: :banana:
05-14-2007, 03:43 PM
Jedda

Malik,
I love the coil on look. I've been chasing that same contrast with the black look since I saw the motherboard is black. Your's is the best use I've seen so far.

What temps are you getting?
I'd really like to know, thanks.
05-14-2007, 03:49 PM
Jedda

Quote:

Originally Posted by Something Sexy

Thank you. Anyone have thoughts on the RAM cooler?

Yep, I use one for my OCZ ram as recommended by OCZ.
It's very comparable to the Corsair equivalent, imo. Quite easy to swap lcds if you don't like the blue.
Like the Corsair they conflict with some AC towers but no issue with WC.
05-14-2007, 03:53 PM
ranker

Jedda's gonna hate me for thinking I'm trying to rain on his product's parade. If you scan the air cooling forum for the OCZ vs CD vs cool spot thread, you'll see a few of us sharing our tidbits about our experiences with various RAM coolers.

OCZ's pushed the least amount of air yet generates the most amount of noise, possibly due to the restrictive nature of the grill. However, in terms of aesthetics, it ruled the bling factor.

CD's were much quieter and exhibited no mechanical noises when undervolting. Their mounting mechanism is much better than OCZ's (which has this annoying rocking tendency).

Antec's cool spot is probably the most unique. It wins in terms of performance and quietness at full speed, but the included fan makes mechanical noises when undervolted. The only other drawback is that some people don't have the room for the "arm" of the cool spot.
05-14-2007, 04:03 PM
Jedda

Quote:

Originally Posted by ranker

Jedda's gonna hate me for thinking I'm trying to rain on his product's parade.

No mate. I'm 55 years old and quite sure my penis length isn't tied up with any product choice. lol
Truth of the matter is no ram cooling product I've used matches an appropriately placed 120 mm fan.
05-14-2007, 04:06 PM
ranker

Quote:

Originally Posted by Jedda

No mate. I'm 55 years old and quite sure my penis length isn't tied up with any product choice. lol
Truth of the matter is no ram cooling product I've used matches an appropriately placed 120 mm fan.

LOL. Good and I agree. The Antec Coolspot is basically a 120mm fan with a unique mounting arm, but does have the weaknesses I pointed out.

LOL, the office is wondering why I'm in stitches.
05-16-2007, 09:05 AM
Malik

Light Version :)

Changes:

- transparent tubes
- Innovatek Fass-O-Matic ( he was on top ) - OUT. Now temps are better
- Innovatek FlowMeter 3.6 - OUT
- Laing Pro -> Laing Ultra
- Innovatek Stealth 360 -> Thermochill PA 120.3

http://shackit.pl/malik/Innovatek%20Project/new/10.JPG

http://shackit.pl/malik/Innovatek%20Project/new/11.JPG

http://shackit.pl/malik/Innovatek%20Project/new/12.JPG

http://shackit.pl/malik/Innovatek%20Project/new/3.JPG

http://shackit.pl/malik/Innovatek%20Project/new/5.JPG

http://shackit.pl/malik/Innovatek%20Project/new/6.JPG

http://shackit.pl/malik/Innovatek%20Project/new/7.JPG

http://shackit.pl/malik/Innovatek%20Project/new/8.JPG

http://shackit.pl/malik/Innovatek%20Project/new/9.JPG
05-16-2007, 09:22 AM
NaeKuh

Black + clear smart coils = l33t!!!

the clear makes it look plane.
05-16-2007, 03:26 PM
sick_g4m3r

Quote:

Originally Posted by NaeKuh

Black + clear smart coils = l33t!!!

the clear makes it look plane.

agree. its sick looking either way, and the shine on that left side cover is so bright
05-16-2007, 03:41 PM
2k7zero

How did u get your PCI brackets painted black? Is there a way to remove the bracket from the gpu or sound card to paint it individually? Really nice build.
05-16-2007, 03:49 PM
pie_uk

agree ^^ smart coils with black tubing ftw.

also where does the tubing go after the res ? sorry for being such a noob lol
05-16-2007, 10:54 PM
Don_Won

malik, where did u get this black tubing from? I cant find it anywhere in poland..
05-16-2007, 11:00 PM
Grinch

Quote:

Originally Posted by Don_Won

malik, where did u get this black tubing from? I cant find it anywhere in poland..

http://www.sidewindercomputers.com/tubing.html
05-16-2007, 11:29 PM
jabski

Quote:

Originally Posted by 2k7zero

How did u get your PCI brackets painted black? Is there a way to remove the bracket from the gpu or sound card to paint it individually? Really nice build.

i would like to know this too. Also nice build Malik :)
05-17-2007, 12:13 AM
Greg_1

Get those stickers off :P
05-19-2007, 04:26 AM
Malik

Quote:

Originally Posted by Greg_1

Get those stickers off :P

Stickers are out :)

UPDATE:

How about that:

http://shackit.pl/malik/Innovatek%20Project/rev1/1a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/2a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/3a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/4a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/5a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/6a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/7a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/8a.JPG

http://shackit.pl/malik/Innovatek%20Project/rev1/9a.JPG

http://shackit.pl/malik/Innovatek%20...t/rev1/10a.JPG

http://shackit.pl/malik/Innovatek%20...t/rev1/11a.JPG

http://shackit.pl/malik/Innovatek%20...t/rev1/12a.JPG

UPDATE II:

http://shackit.pl/malik/Innovatek%20Project/rev2/1.jpg

http://shackit.pl/malik/Innovatek%20Project/rev2/2.jpg

http://shackit.pl/malik/Innovatek%20Project/rev2/3.JPG

http://shackit.pl/malik/Innovatek%20Project/rev2/4.JPG

http://shackit.pl/malik/Innovatek%20Project/rev2/5.JPG

http://shackit.pl/malik/Innovatek%20Project/rev2/6.JPG

http://shackit.pl/malik/Innovatek%20Project/rev2/7.JPG

http://shackit.pl/malik/Innovatek%20Project/rev2/8.JPG

Final view:

http://shackit.pl/malik/photos/3/9.JPG

UPDATE:

GREEN EDITION

http://shackit.pl/malik/green/g1.jpg

http://shackit.pl/malik/green/g2.jpg

http://shackit.pl/malik/green/g3.jpg

http://shackit.pl/malik/green/g4.jpg

http://shackit.pl/malik/green/g5.jpg

http://shackit.pl/malik/green/g6.jpg

Some changes:

http://shackit.pl/malik/green/rev1/1.JPG

http://shackit.pl/malik/green/rev1/2.JPG

http://shackit.pl/malik/green/rev1/3.JPG

http://shackit.pl/malik/green/rev1/4.JPG

http://shackit.pl/malik/green/rev1/5.JPG

http://shackit.pl/malik/green/rev1/6.JPG

http://shackit.pl/malik/green/rev1/8.JPG

http://shackit.pl/malik/green/rev1/9.JPG

http://shackit.pl/malik/green/rev1/10.JPG

And with lights:

http://shackit.pl/malik/green/rev2/2.JPG

http://shackit.pl/malik/green/rev2/1.JPG

Answers:

Quote:

Originally Posted by 2k7zero

How did u get your PCI brackets painted black? Is there a way to remove the bracket from the gpu or sound card to paint it individually? Really nice build.

Yes, you can remove the brackets and paint :)

Quote:

Originally Posted by Don_Won

malik, where did u get this black tubing from? I cant find it anywhere in poland..

I buy this tygon in this shop: AquaTuning.de

Next update:

http://shackit.pl/malik/Innovatek%20Project/rev3/22.JPG

Gallery:

http://shackit.pl/malik/Innovatek%20Project/rev3/1.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/2.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/3.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/4.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/5.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/6.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/7.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/8.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/9.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/10.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/11.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/12.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/13.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/14.jpg

http://shackit.pl/malik/Innovatek%20Project/rev3/15.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/16.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/17.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/18.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/19.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/20.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/21.JPG

http://shackit.pl/malik/Innovatek%20Project/rev3/22.jpg
06-30-2007, 12:21 PM
Agent11

Looks sexy. I would never mix metals though.
06-30-2007, 01:25 PM
migueld

Where did the cables go!? ;) Looks great, good work.

Good DDC reservoir top riddance btw.
07-01-2007, 01:55 AM
buffbiff21

Quote:

Originally Posted by Malik

http://img364.imageshack.us/img364/938/15191180jz9.jpg

Money.
07-01-2007, 04:41 AM
LogAn'sRun

1 question and my $.02:

?. Did you notice any big performance/noise diff between the Ultra and the Pro??

$.02 Green > blue but BLACK FTW!!!
07-01-2007, 07:26 AM
RickCain

Why exactly have you been slowly removing the Innovatek equipment? Is it due to performance or pressure from this forum?

I think this one is the best looking. I really like blue on black!
http://shackit.pl/malik/Innovatek%20...t/rev1/10a.JPG

Too crowded IMHO
http://shackit.pl/malik/Innovatek%20Project/rev2/1.jpg
07-01-2007, 08:20 AM
AndyM

Wow! Nice work!
07-01-2007, 02:47 PM
Malik

Quote:

Originally Posted by LogAn'sRun

1 question and my $.02:
?. Did you notice any big performance/noise diff between the Ultra and the Pro??

$.02 Green > blue but BLACK FTW!!!

Answers:
1. Ultra is more noisy but the performance is much better than pro version. But with proper vibe isolation it's equally quiet.
2. For me - green is the best. When i use black tygon - it's too dark inside PC.

Quote:

Originally Posted by AndyM

Wow! Nice work!

Thanks ;)

RickCain: I changed Inno because EK is better in performance.
07-01-2007, 03:07 PM
ranker

Quote:

Originally Posted by RickCain

Why exactly have you been slowly removing the Innovatek equipment? Is it due to performance or pressure from this forum?

Taking shots at XS members again? Let's not forget what happened to your [H] friend Top Nurse. People come here to XS to become informed, not to be brainwashed, pressured, or inducted into cults.

Quote:

Originally Posted by Malik

RickCain: I changed Inno because EK is better in performance.

Agreed. It's nice to toss that aluminum out too without having to worry about mixed metals nor having to use additives and its hassles.

I love the look and setup of the green/black scheme rather than the blue scheme.
07-11-2007, 12:01 PM
Malik

Some new stuff arrived:

http://shackit.pl/malik/Innovatek%20Project/rev4/1.JPG

http://shackit.pl/malik/Innovatek%20Project/rev4/2.JPG

http://shackit.pl/malik/Innovatek%20Project/rev4/3.JPG

http://shackit.pl/malik/Innovatek%20Project/rev4/5.JPG

http://shackit.pl/malik/Innovatek%20Project/rev4/6.JPG

http://shackit.pl/malik/Innovatek%20Project/rev4/7.JPG

All blocks will be modified to... you will see :)

And backplate for D-tek:

http://shackit.pl/malik/Innovatek%20Project/rev4/8.JPG

stay tuned...

Show 100 post(s) from this thread on one page