The 500MHz+ CAS 3 Club

Quote:

---

Originally Posted by ineedaname

Here's a good question.

Is anyone brave enough 2 use these timings and voltage 24/7.

---

Nah, if anyone's that stupid, they deserve the day or so their sticks might last. ;) This is suicide shots only.

Quote:

---

Originally Posted by Miravo

Teams with 8 layer PCB are dying :mad: So it doesn't work in every case

---

the Teams have 8-layers?

thats bad, how do you cool the Chips?

I use Dominator Airflox for "normal" OC and 14cm Fan with 150m³/h for more than 2,8 V

In r00n's ramlist there is signature, that it is 8 layer PCB :confused:

I cooled it with either Revoltec Airguard 120MM (12v) & Titan 80MM (12v) (almost the same as DELTA :banana: ) or original (thermalright heatsinks) with Titan 80MM @ 12v :rolleyes:

I made it to the 500MHz Club!

Hardware:
P5B Deluxe
Two Sticks of Buffalo Firestix FSX1000D2C-1G (D9GKX)

Voltages:
NB - 1.8v
RAM - 3.0v

Timings:
3-3-3-8

Validation:
http://valid.x86-secret.com/show_oc?id=202177

Screenshot:
http://i110.photobucket.com/albums/n...3-3-3-8500.jpg

Quote:

---

Originally Posted by ozzimark

hmmm, am i the only one with 500mhz cas3 on AM2? :D :D
http://valid.x86-secret.com/show_oc?id=187851

---

... just so you don't feel lonely there, ozzi, I dug out the result of my battle with M2N-SLI from last summer :up:

Corsair TWIN2X2048-6400C3 @ 2.90v .:. CPU-Z Validation @ 506MHz 3-3-3-8 .:. SPi32M @ 484MHz 3-3-3-8

I definetely need to get those 965P/P35 CAS3 results going, though... :)
:toast:

Can I join?
One of the local Distributors sent me a P35 board to test.
So i decided to take out my old Corsair C3s to test.
No memset to tweak the timings.
All booted from bios.

Spi1m @ 2.7v 3-4-3-9-(25-8-9-8-9)

http://i76.photobucket.com/albums/j3...1m_3007mhz.jpg


Spi32m @ 2.9v 3-4-3-9-(25-8-9-8-9)

http://i76.photobucket.com/albums/j3...2m_3007mhz.jpg


Validation :

http://i76.photobucket.com/albums/j3...Validation.jpg


3-3-3-9 couldn't run 32mil so i gave up.
I was afraid i killed my rams.
(I kill 1pair and corsair replaced me with a 8500c5 v1.3 :()

ASUS M2N-E nForce 570
Kingston KVR800 D9GKX Vidimm Mod@2.9v
540 CL3
Bios Boot

CPU-Z Database 540 CL3

For the 500MHz+ CAS 3 Club :)

http://img217.imageshack.us/img217/9151/wrcas3dr7.gif
http://valid.x86-secret.com/show_oc.php?id=202600
With 3,3V

Very nice 552mhz is crazy Florent. This is mine, vdimm 2.525 bios:

http://img.photobucket.com/albums/v6...cas3500mhz.jpg

http://img.photobucket.com/albums/v636/loc_oc/500.jpg

Quote:

---

Originally Posted by Kabauterman

I have some other Kits here,

Dominator 8500 CL5 and Mushkin XP2-8500 both with D9GMH
but they don't wan't to reach the Clocks of my lovly G.Skill 8000 HZ with D9GKX

@ all the Voltage lovers:

Pls don't give more than 3V on a 6-layer PCB this is the death for the Chips
on 8-layer you can go to 3,2+ with good airflow.

---

Hmm...
Im about to test my pair of 8000HZ this weekend, are you sure of this matter..? I've been informed with good airflow 3,2V wouldnt be the certain death, for benching ofcause..
- Gonna test 'em as soon as I get my Xeon3060... - I'm gonna curse to billy high heaven if I dont enter this club :shakes:

Quote:

---

Originally Posted by Sabuy-Sabuy

ASUS M2N-E nForce 570
Kingston KVR800 D9GKX Vidimm Mod@2.9v
540 CL3

CPU-Z Database 540 CL3

---

coolaler?

man, there are extreme v's!

502mhz @ 3-3-3-9 @ 3.28vdimm. Direct boot from bios and load into windows

Mobo: DFI Infinity Dark-S(Beta Bios: 5/31/07)
Memory is OCZ HRC Reaper Series 1gb x 2 kit in dual channel

http://img117.imageshack.us/img117/8...vpi1milrq3.jpg

Quote:

---

Mobo: DFI Infinity Dark-S(Beta Bios: 5/31/07)

---

Are you sure ?
On the screens, it's marked 4/24/07

hi
i got it!

500mhz cl3-3-3-9 on an asus commando i965.

memory:
2x512
kingston hyperx 9600 cl5

bios set:

divider: 9
fsb: 334
vdimm: 3,025v
fsb-voltage: auto
nb vcore: auto
ddr2 controller ref voltage: +10mv

bios: 0601 (dont know, if its good or not.... :shrug: )

its just stable for cpu-z validation.
not stable for superpi

validation:
http://valid.x86-secret.com/show_oc.php?id=205236

pic:
http://666kb.com/i/aoynsjettqez4nu06.jpg

Quote:

---

Originally Posted by Florent

Are you sure ?
On the screens, it's marked 4/24/07

---

It is actually mod Bios dated 5/31/07 base on official 4/24/07 bios

:clap:

Quote:

---

Originally Posted by memory

It is actually mod Bios dated 5/31/07 base on official 4/24/07 bios

---

Bios Mod by who ?

Link ?

Thanks :)

Hi guys!

Memory:
2*512 Mb SpecTek PC4300 remarked D9GCT
Biostar TForce P965 VDimm/VCore mod
VDimm DMM 3.16v
Timings: 3-4-4-9 2T
Cooling: Mobile Air Condition +16'C
530 MHz 8M Stable
http://img101.imageshack.us/img101/1979/cl3rai0.th.png


CPU-Z Validation
540MHz
http://valid.x86-secret.com/show_oc?id=206198
http://img257.imageshack.us/img257/4336/verifiednr9.png

555.4 MHz Cl3 Done! :fact:

vDimm 3.42v

http://valid.x86-secret.com/show_oc?id=206212

http://img247.imageshack.us/img247/3693/3wrnw9.png

Sticks is dead :( :shrug:

Nice Vlady.... Is that the WR? That 530fsb 8M stable is just sick dude....

Here's mine, single channel only cos the other stick is a dud..... Straight from bios, could probably gone higher but didnt wanna stay too long at this voltage (2.95v)....

Validation
http://www3.telus.net/luis99/oc/cas3.JPG

Quote:

---

Originally Posted by v|aDy

555.4 MHz Cl3 Done! :fact:

vDimm 3.42v

http://valid.x86-secret.com/show_oc?id=206212

http://img247.imageshack.us/img247/3693/3wrnw9.png

Sticks is dead :( :shrug:

---

I had Biostar when he came out and there was problem - when I set CAS4 in bios, everything showed me CAS3... but it was actually CAS4. Mind it ;) And CAS=3 wasn't working at all

Quote:

---

Originally Posted by Miravo

I had Biostar when he came out and there was problem - when I set CAS4 in bios, everything showed me CAS3... but it was actually CAS4. Mind it ;) And CAS=3 wasn't working at all

---

:confused: May be, but this result was get with bios set cl to 3 :cool: I don't no 3 or 4 was actually in my result :shrug: . Sticks is dead :( and I don't repeat this result :mad:

Maybe it was old bios issue, but CL3 wasn't working at all :(

Yesterday I update bios to 601 and went to take max frequency with CL3 :shrug: