AussieJester all i can say that your ufo replica is one high quality build, one of my favorite projects here in XS. can't wait to see it finished.
Printable View
AussieJester all i can say that your ufo replica is one high quality build, one of my favorite projects here in XS. can't wait to see it finished.
Wow....you sure have put a lot of time and effort into your build !
and it really shows.....!
Nice work, can't wait to see the final product
Cheers for the positive comments fellas much appreciated. I have another update to do but before I do I best let members here know I have withdrawn from the OCAU modding comp. Two reasons behind this but the main one is ineligibility due to breaking the $AU200 budget limit for modz in the comp. I am ~20 bucks over it and still require a good 30-40 bucks worth of stainless steel caps screws to complete the assembly. Yes I could have skimped and gotten by just to make the budget but its not the way I like to do things, I like to to the job once and do it well, I see absolutely no point making sacrifices to win a small competition (would be different if there was prizes of value on offer though :-P ) Obviously I will still be finishing the case so for those following this worklog don't stress should see it complete sometime over the weekend now i don't need to rush it :-) OK then--->
Update
Fine weather today allowed for the spraying of the metallic silver enamel. I firstly taped up the case so as the inside didn't receive any 'unwanted' over spray before letting fly with the Protec enamel-->
http://myfoto.westnet.com.au/Photo/s...ies_Pic_13.jpg
Click here for full size pics
This protec paint is fantastic stuff, industrial paint usually used in the motor vehicle body building industry, it is extremely hard wearing and very fast drying, it is touch dry in under 5 minutes and additional coats can be applied upto 4 hours after initial coat (after which 24 hours drying time is required before additional coats) The case has now had a dust coat and 4 heavy coats. I also took a close up of the paint to help show better the metallic flek in it which can't really be seen in the above pics-->
http://myfoto.westnet.com.au/Photo/s...our_sample.jpg
Click here for full size pics
I will let this dry for 24 hours now before hitting it with 6 or 7 coats of 2Pak clear gloss, this will then be cut and polished. Unfortunately the above pics don't do justice to the colours, IMO its fantastic and really gets 'set off' by the matt black interior.
Thanks again for the kind words, I shall be back with another update tomorrow ...
Ciao for now people ;-)
Looking absolutely fantastic mate :D - I'm going to go and rub my cleaning cloth a bit harder over my U2 to make myself feel better :p:
great work!
I like it more then the u2fo, and you get propls for making it
You have a damn fine case yourself they(UFO cases) are the reason this worklog exists! I would happily pay what you did for one IF i had the money unfortunately my disability support pension doesnt 'pay' very well LoLQuote:
Originally Posted by GeoffP
Thanks mate appreciate that :-)Quote:
Originally Posted by teyber
Update
Just a small update today fellas really due to a comment made in another forum this worklog is also on. It was mentioned the colour was nice but not as 'shiny' as my usual finishes, I reminded the poster that it was only the base coat and had clear to follow. The first of half a dozen coats went on yesterday & i took the following picture to show it will have some shine....ALOT of shine hehe-->
http://myfoto.westnet.com.au/Photo/s...a/IMG_0691.jpg
This is untouched straight off the gun, it will be sanded today lightly with 1200 grit wet and dry allowed to cure again then painted with another heavy/"wet"coat of 2Pak clear gloss tomorrow (weather permitting)
Back soon :-)
Great job Jester, silver = my fav case colour :clap:Quote:
Originally Posted by AussieJester
I'm in the same boat as you re disability pension and not getting the 500 bucks everyone else got has me steaming :down: :mad:
very nice color, it really compliments the black interior. :up:
Perth ForecastQuote:
Originally Posted by AussieJester
Issued at 11:20 am WST on Saturday 2 June 2007
Warning summary
Nil.
Forecast for Saturday
Fine. Light to moderate E/NE winds.
Precis: Fine.
City: Max 21
Forecast for Sunday
Fine. Light to moderate E/NE winds.
Precis: Fine.
City: Min 8 Max 21
NO EXCUSES :p: Need a picture of the 2-pak finish - I believe it will be fantastic based on your workmanship skills. :)
ROFL just good enough not meant to spray 2Pak when temps under 20 degrees i have been told ;-P Be more the point of if im not to hung over have the lads over as i type this just finished doing our best to eat a paddock of cowz and half a rain forrest think we keep ol Jim and Jack in business sometimes :: hiccup:: hehehe do ma best though mate ;-) :: buuurp :::Quote:
Originally Posted by GeoffP
hmmmmm, steak & bourbon :slobber: of-course, on a bbq :up:Quote:
Originally Posted by AussieJester
When I come over for work to Perth next I will drop in and eat some of your wonderful culinary delights :p:
You wont believe this but my brother rang up (out of the blue) haven't seen or heard from him in MONTHS and he's on his way up for few drinks and another barby this arvo LoL Let us know when your in the West mate and we can catch up for a drink and chat no probs at all, met a few people I have met on the forums...LoL including my now ex-wife LoLQuote:
Originally Posted by GeoffP
Update
I cut the first coat of 2Pak gloss back with 1000 grit and have applied another 'wet' coat -->
http://myfoto.westnet.com.au/Photo/s...ies_Pic_14.jpg
Click here for full size pics
Will be same routine tomorrow, another very very light sand with 1200 this time as there isn't any 'orange peel' to speak of, before repeating with more gloss, I want this looking like you can dive into it when its finished IMO its well on its way...
Back soon folks :-)
Dammit Jester I'm going to have to paint my Tj05 internals black now after seeing yours and how good it looks :clap: grrrrrrrr
Its in pieces ATM as I'm putting the rad 'up top' :)
Damn,
I just wet myself, the paint job is looking very nice indeed.
Sounds like barby heaven at your place :p: Yeh thanks mate, I will give you a hoy when I'm over next - which is at any time as we seem to have installation works happening all the time over there.. :DQuote:
Originally Posted by AussieJester
very nice
Very nice job there m8 :)
f*cking excellent job there mate... im really digging the paint job, and the case itself looks awesome..
Come on! Less slacking more working!
I'm looking forward to seeing the result of this. Hence why I actually had to search threads made by you! :)
HAHA ah Mekrel I have been trying to save some $$$ for new PSU for the case as I want to get all the wiring done next, you shall be one of the first to know when i have that aforementioned psu and wiring is underway...as is case is finished awaiting components ;-)
What PSU are you going for if you dont mind me asking?
I'm wanting to go for a single rail Silverstone Olypia 750w, going to buy off performance PC's as they custom cable braid stuff. Did a hyper PSU around 3 years ago, do able but very hard I found.
My PC343B build is coming along now. Designed a pump holder and it's been laser cut. Should be ready some time next week. :)
Undecided at the moment, when I have some dollars together I'll start to get a more serious about choosing, that said I do like the Corsair 620watt unit and the price for me is within easy reach, I would also drop a Enermax Galaxy DXX EGX1000EW in a heart beat if i can afford it, this would ensure a lil 'future proofing' for a few months :-| ....doubt this will happen though, my limited finances are already divided between my pc gear and r/c Helicopters...the choppers winning of late LoL...damn gravity.Quote:
Originally Posted by Mekrel
Getting a Corsair this week. It's much more convieniant than my Tagan. Modular and 150mm long helps in a tight case.
I'm looking forward to seeing how you treat your rad fan holes in this build. There's not that many silver cases with rad grills around. Heaps of black builds with grills on top and front but not many silver, paint or brushed al. My build has a top mounted PA120.3 and it's holding me up atm. Don't like the chrome grill against brushed al much. I'd use three wire grills but it'd take cutting good neat holes or look crummy.
Those choppers are bloody addictive.
Up at 7AM this morning? hee hee
Worth it to see red and blue on the podium but would've liked to see Rossi on the same tires. Then we'd have had a three way battle instead of an aussie walk over.
I'd buy the Hx620 ASAP Jester as PLE wont have too much stock and they (Hx620) usually sell pretty fast
6.55 actually TV on channel 10 ;-)Quote:
Originally Posted by Jedda
GOD NO! Nobody would see which way he went :-| Heaven forbid he gets a lil patriotic and decides he wants to ride for Ducati he would be unbeatable.Quote:
Originally Posted by Jedda
Casey Stoner and Chris Vermulen did Australia proud today, If Casey stays on the bike he will take the World Championship this year I believe, regardless whether Yamaha find some more speed when they fit nematic valves for more HP over the mid season break... He has won and been competitve on all track types in the dry and wet, yes he has the best race package but lets not forget the tank full of ability he has, critics/commentators have finally realized to its not JUST the bike that sees Casey on the top of the World Championship ladder ;-)
meh...I don't mind watching a couple of Aussies battle it out for 1st 2nd and 3rd In fact, with a bit of luck Ant West will work his way to the pointy end of the field ;-) Aussie 1 2 and 3 maybe :-PQuote:
Originally Posted by Jedda
Cheers for the info ;-) although it doesn't affect me, I rarely buy anything local (outside of wholesale) other than blank dvds , everything is either from the east or overseas ;-)Quote:
Originally Posted by alpha0ne
Same here but very little stock of the HX620 AU wide :)