Printable View
Ryan, can you please tell me something about the new Platinum series ?Quote:
Originally posted by ryanpgroovy
On some difrent boards I was able to run the voltage much higher than you , I dont have the aopen though .
did you try CL 2.5 3-7-3 for the max at that speed yet ?
BTW I think 502 in memtest is incredible
How high will these sticks go at CAS 2.0 5-2-2 and how much voltage do they require ?
I know they are rated CAS 2.0 6-3-2, but I bet you tried CAS 2.0 5-2-2 just for fun ;)
Here's one of my highest mem benches thus far.
http://www.maximumoc.com/img/hardwar..._8knxp/mem.png
you using a 3:2 divider ?
Sys, I nearly dropped a load until I realized those were Intel scores :lol:Quote:
Originally posted by sysfailur
Here's one of my highest mem benches thus far.
Thank God you held it, lol!Quote:
Sys, I nearly dropped a load until I realized those were Intel scores
Rofl, yeah excuse me for not saying what that was. It's my Gigabyte Canterwood :P Mem is on the 1.33 setting.
It's kinda odd. I get that when my mem is only @ 192.5mhz. Then when I run @ the 1.66 mem setting, my mem scores are not as impressive. And 2.0 setting (1:1), I dunno, don't really care :P
thanks macci ;)Quote:
do you know why my sandra @200 unbuffered is much more different from yours?
mobo, bios and cpu are the same...but.......:(
http://utenti.lycos.it/warionet/sandra200un.jpg
I've noticed now this bigtoe's sentence...:rolleyes:Quote:
Originally posted by bigtoe
I have the TwinMOS m8 and i can run ddr500 with it.I can tell you compared to the OCZ its utter CRAP.
OCZ on Aopen = 3100MB/s in memtest86 at ddr500
TwinMOS on Aopen = 2500MB/s in memtest86 at ddr500
In the bench above me I have used a Twinmos pc3200... is it indeed possible that the Twinmos go worse (at least in sandra) in comparison to other ram as Ocz or Kingston? :confused:
Why them do it?
byez :cool:
OCZ 3700 Gold @ 2.9v 262 Mhz
This memory goes higher then any memory I've ever tested, It does need relaxed timings though.
OPP
Very nice fsb there Opp..care to run us an Unbuffered bench off..you must have 3600+ with luck!!
Thanks
Heres some at 254,, 3-3-7 Cas2
OPP
Heres a nice one at 256
OPP
The race to 4000Unbuffered is on!!..hehe
Nice bandwidth Opp..couple that with a 3.2C 1:1..:slobber:
260 maxed relaxed settings and timings.
OPP
Yea I was thinking the same :)Quote:
Originally posted by bigtoe
Nice bandwidth Opp..couple that with a 3.2C 1:1..:slobber:
OPP
Freak of nature at 254 :D
OPP
Some damn nice ASUS powar there OPP :)
but turn off the MMX optimization otherwise its not a 'pure unbuffered/unoptimized' :)
btw, which P4C800 bios are you using?
The 1007.006 bios.Quote:
Originally posted by macci
Some damn nice ASUS powar there OPP :)
but turn off the MMX optimization otherwise its not a 'pure unbuffered/unoptimized' :)
btw, which P4C800 bios are you using?
I was wondering if I was doing the Unbuffed right :)
I'll redo this stuff tomorrow and check it out.
OPP
Just uncheck all MMX/SSE/SSE2 optimizations. It shouldn't make a huge difference but the RAM Int. score will most likely drop a bit.
Burner man, hmm now thats a bit wierd stuff. The RAM model might make a little difference but that alone won't explain the difference. You enabled Turbo and Performance acceleration in the BIOS? timings 2-2-2-5-4?
OPP, how did your HyperX OC on P4C800? Max FSB 1:1 mode w/ HyperX?
Macci,Quote:
Originally posted by macci
Just uncheck all MMX/SSE/SSE2 optimizations. It shouldn't make a huge difference but the RAM Int. score will most likely drop a bit.
2 out off 3 times with same method, clean reboot, wait 3 minutes in windows, I'm getting higher scores with MMX unchecked.
Average of 10Mb/s int and just a few Mb/s in float.
This is with my Kingston and Msi right now doing 215 5:4 at maxed timings.
My Kingston maxed at 252, and I was able to use 2-3-7 Cas2 Timings on the P4C.
OPP
Ok well I guess it doesn't make much difference then :)
Interesting that your kingston did it all the way up to 252. I'm having problems going past 238 no matter what timings. Also it does over 250 on IC7 2-5-2-2. Wierd stuff :D
btw could you do a PCMark2002 MEM bench run with that OCZ stuff. Also a 3DMArk2001 lobby hi comparsion with different modules (aka HyperX vs. OCZ) would be interesting to see.
Yea I'll do that late tonight I have to Paint a bathroom today before I can switch over to the Asus, I hate Painting :DQuote:
Originally posted by macci
btw could you do a PCMark2002 MEM bench run with that OCZ stuff. Also a 3DMArk2001 lobby hi comparsion with different modules (aka HyperX vs. OCZ) would be interesting to see.
OPP