QX6700 490fsb 32M: :D http://csd.dficlub.org/pgpbb2/viewtopic.php?p=4583#4583
Printable View
QX6700 490fsb 32M: :D http://csd.dficlub.org/pgpbb2/viewtopic.php?p=4583#4583
he said he reached 480FSB with the P5B deluxe as well...........just a decent CPU i guess :DQuote:
Originally Posted by flytek
Quote:
Originally Posted by dinos22
yeah it seems ok. LOL:p:
Where he said that. 480 MHz and 490MHz is with same DFI MB at that link:)Quote:
Originally Posted by dinos22
Any facts available on Vcore stability and Vdroop?
Quote:
Originally Posted by virtualrain
DFI have been pretty good on the vdroop in the past with the Infinity / LP line.
Id trade my RD600 for it.
vdroop is said to be between .015and .02v so not badQuote:
Originally Posted by virtualrain
That is good. This board is looking nice indeed! I just wish DFI would stop using those lame clip mounts on the NB heatsink... this board is worse than most in that it only has a pair of retention loops instead of four... Impossible to get a good water block mount with that crap.Quote:
Originally Posted by Revv23
How about those jumpers for the PCIe slot configuration... what's the story with those?
How do I find out what stepping my processor is...and which steppings are the best oc'ers?
if i was deciding on a 24/7 system between Commando and this DFI i would look at the effects of ambient temps contributions by VRM from both mobos....i wonder if Asus digital one will have a significant advantage in reducing overall heat or not
nah digital vrm gets hot too, just look at the big heatsinks on them.
personally i think the dfi wins just for not being asus.
well you do make a convincing argument there i must say..........i really want to test one of these :DQuote:
Originally Posted by Revv23
i know, you have a a P5B-D too right? We should get them together and race haha... i dont need a new mobo but this one might be fun to play with, especially on 1066 strap at 500fsb. :)Quote:
Originally Posted by dinos22
It would really be cool if dfi had included the 1t setting like abit did, then it would be a done deal.
wow didn't know 1T was possible on 965 :confused:
Quote:
Originally Posted by dinos22
Supposedly it's been around since the introduction, just no manufacturers have used it:
http://xtremesystems.org/forums/showthread.php?t=130149
Abit's new board has it though:
http://xtremesystems.org/forums/show...6&postcount=55
Unless you have more than 4 Raptors in RAID0 your controller may work just fine @ 4x.Quote:
Originally Posted by mesyn191
http://www.doompc.com/temp/4x_raptor_raid0.gif
4 Raptor RAID0 sustain about 300MB/s, 4x PCIe has 400MB/s bandwidth for each direction (800MB/s full duplex).
coolaler made another thread... it includes memory bandwidth and FSB overclocking with every form of conroe chip (2m,4m, QC)
http://csd.dficlub.org/pgpbb2/viewtopic.php?t=582
thanks for the updates
Obviously I want that board to touch the magic 600Mhz, but that would be too ambitious ^^, because at 500-540 (which P5B-Dx can do), the Infinity has won hands down already.
Now 1T on Abit AB9 (does QuadGT have it? ._.) is a bit curious, I would like to see how far it goes with memory and bandwidth and how well it stand against P5B-Dx and Infinity.
Too many options and reasons to ditch Asus :P
Hehehe you only just got your RD600 :confused: :stick:Quote:
Originally Posted by wangerin
When will this board hit retail?
It is definitely the best board, especially for high FSB with quads
Quote:
Originally Posted by Blknoel
according to bingo13 quadGT is the fastest 965 board around clock for clock, but the bios is very weak, it wont go over 525fsb without issues, a new bios should help though. Also, 1t isn't working well on it yet.
Edit - looks like he got the preview posted up: http://anandtech.com/mb/showdoc.aspx?i=2911
When is this board due out?
Quote:
Originally Posted by mrt2
never.. :p:
no one knows.
If you can't figure out your P5B though a more option heavy DFI isn't going to be what you are looking for.