Rockin some 1m, 8m, and PIFAST with Hipro-tech DDR MAXI

no tweaking @ 1m?

Somebody know what is the WR max Mhz DDR2 speed?

Quote:

---

Originally Posted by over@locker886

Somebody know which is the WR max Mhz DDR2 speed?

---

i GUESS its 670mhz with A-DATA EPP...but im not sure

Don't be so scared of 32M, Vince :D With those mems and MAXI, I'm sure you could submit a sweet, 600+MHz result to EnJoY's database :fact:

Did I mention already, great results? Haha, I guess I did, already 2 times - never enough :lol:

Quote:

---

Originally Posted by ocfx

i GUESS its 670mhz with A-DATA EPP...but im not sure

---

Thx;) I found same.

Quote:

---

Originally Posted by bachus_anonym

Don't be so scared of 32M, Vince :D With those mems and MAXI, I'm sure you could submit a sweet, 600+MHz result to EnJoY's database :fact:

Did I mention already, great results? Haha, I guess I did, already 2 times - never enough :lol:

---

thanx bach,
hehe.. you know I leave 16m and 32m alone.
32m doesn't scare me :D, 3dmark 03 does.

@kunaak:
Are you using the ddr2pcb when you say you dont need to desolder the coil on your p5b?

Quote:

---

Originally Posted by k|ngp|n

@kunaak:
Are you using the ddr2pcb when you say you dont need to desolder the coil on your p5b?

---

yes.

Quote:

---

Originally Posted by Kunaak

yes.

---

Figured you had to be or had it wired in somewhere out of the pic. All my tests on both p5b and p5w are done using no maximizer pcb at all, just straight vdimm feed to the slots directly from the maxi in case anyone was wondering. It may bypass some of the vdimm vreg ciruitry on the mobo this way as well. I am sure HIPRO could answer that. My ddr2 pcb should be showing up soon.

Quote:

---

Originally Posted by VictorWang

491mhz 3-3-3-8 pi_1m on P5WDH , insane !
still, conroe preffers higher ramclk but not good timings :(

my x6800 @ 360*10 , with ram=1080 4-4-3-1, pi_1m=14.047sec
I've compared a lot ram, d9dqt, d9gkx, d9gmh, 512m vs 1g...etc.
ddr2_1000 4-3-2-8>4-4-3-8>ddr2_900 3-3-3-8
ddr2_1050 4-4-3-8=ddr2_1000 4-3-2-8

Kingpin you got fantastic ram, so I think you can try ddr2_1200 4-4-3-1 (I bet you can achieve that with this pair of 6400c3 ).
3.6G pi_1m break 14sec with ease :D

---

Interesting, I am getting this at 3.6Ghz, 540 5-5-5-15, p5b dlx. So 490 3-3-3 is pretty much = 540 5-5-5

http://img208.imageshack.us/img208/8835/36ghzvf9.jpg

Quote:

---

Originally Posted by k|ngp|n

Figured you had to be or had it wired in somewhere out of the pic. All my tests on both p5b and p5w are done using no maximizer pcb at all, just straight vdimm feed to the slots directly from the maxi in case anyone was wondering. It may bypass some of the vdimm vreg ciruitry on the mobo this way as well. I am sure HIPRO could answer that. My ddr2 pcb should be showing up soon.

---

You're right of .......everything you said.....:D