that's great manQuote:
Originally Posted by afireinside
it's so easy with conroe hey
i improved my 3DMark01 by 5K+ just by changing to Allendale@3.8Ghz
that's great manQuote:
Originally Posted by afireinside
it's so easy with conroe hey
i improved my 3DMark01 by 5K+ just by changing to Allendale@3.8Ghz
Really? This is with P5B Dlx and 60 fewer MHz than you.;) 4-4-3 timings at DDR2-1095.Quote:
Originally Posted by fhpchris
http://img167.imageshack.us/img167/9...mx23650wp6.jpg
Quote:
Originally Posted by pcdoc1
I wouldn't trust asus probe all all. Mine would read the cpu being below room ambiant. I tried core temp and that seemed to report my temps normally.:)
That is only single 32m!Quote:
Originally Posted by brentpresley
He has a FSB of like 1900vs my 1450, and he is running faster ram at 1:1 ratio.Quote:
also he is on Allendale and he still beats you lol
I could not get 550 to pass running 2:3 on 2.4v. We all know 1gb is slower than two either way....
I do not feel bad that I got within 30 seconds... I didnt turn services off or do a daignostic boot.. there is still time left :)
I just was tired and wanted to go to sleep xD.
Stop hijacking afi's thread.
Afi, thx for that temp :D
Looks like a killerchip, I got a L627A101 on the way now ;)
Ok, it's on. :p:Quote:
Originally Posted by afireinside
Try doing it with 2x1024 now. ;)Quote:
Originally Posted by fhpchris
mine is bigger than yours....:slapass:
comon, this this tread is not a comparison tread guys....
afireinside:nice processor,what are you keeping for 24/7
afireinside, You have a P5B Deluxe and a swift tech north bridge cooler. Is there any way you could post a pic of the NB HS on that board for me? I've already decided on the P5B and was concerned with cooling of the NB. The thing that concerned me the most with using an after market cooler was that I would have to remove Asus' heatpipe. How did you get around that? Thanks much for your time! :)
P5B-DELUXE (no mods)
E6600(L627A106)
air cooler:HR-01
http://i111.photobucket.com/albums/n126/ruei0888/D2.jpg
approaching closer and closer to 4ghz air e6600 as we get newer batches! nice!! maybe by 32 or so we hit it with ease
I am not Hijacking AFI's thread, I was giving a comparitive result that was to show the difference in the boards and ram we have, It isnt out of place.Quote:
Originally Posted by M.Beier
You got some sticks you want to send me? :DQuote:
Try doing it with 2x1024 now.
I might yank some ram out of the Yonah system and try if I get time this weekend.
Ya, Andre's time is rather quick, allendale or not -- As far as I know no one else has run a faster time at 3.3ghz. I also do not want to talk about Pi performance in great detail, but Sean did want to know about what the difference actually is. I think he is much more concerned about the difference in 3D.Quote:
also he is on Allendale and he still beats you lol
anyway was just a bit of a joke didn't want to drag out AFIs thread talking about SPI performance
I know quad interleave is huge in this area also, I would imagine that it has some serious gains in 32m.
If one of my roomates has a multimeter, I might pencil mod the board for another .1v to .2v on ram to get 550 stable in 32m.
http://afireinside.evilspork.net/AFI...o/IMG_0928.jpgQuote:
Originally Posted by PC Surgeon
Just pop the pins off for the heatpipe cooler and put the swiftech on. The mosfets don't need the cooling and are fine even at 1.7v BIOS with a panaflow blowing over them.
peter> Very impressive prime speed, I'll try 3.8 today :)
afire, do you have a fan on your Swifttech NB cooler? One the P5W, with my Ultr-120, I cannot put a fan on it - too tall. I actually have the Whisper active copper cooler that's is "tweaked" up against the U-120-I woory the contact is not that great because it's hitting the the CPU HSF. It's also fairly audible. I'd like to change to a swiftech, but there's no way I could fit a fan on it. Does the bare sink do OK on a high OC?Quote:
Originally Posted by afireinside
Fan is on. It hardly fits under the typhoon,
AFireInside,
How long running small and large FFT in Orthos? I can do 3.8 and 3.9Ghz also but it sure won't pass Orthos DC 100% taxed without errors.