Abit AB9 \ Pro vdimm & mch vmod please

Quote:

---

Originally Posted by NtFs

Crotale, I saw that you changed the mod a little, but can I stay using the old scheme?


And another question is: I watercool ma NB, but temps here in brazil are very high, and the ND keeps @ 33°C... How much FSB should I get with this temps, and how much voltage I can set safely?


Tanks alot!


Sorry for my bad english

---

They are the same, both works.
I just wanted to clarify which of the points that are "hot" and which are ground.

I'll add suitable ground spots in future mods.

@crotale
Thinking of the vdimm mod,but where is the read out?

I usually measure it directly in the dimm slots.

http://www.nordiccrew.com/crotale/vm...m_read_out.jpg

@crotale
Thanks :D

GOD JUL

16 ver of bios guys improves any overclock issues? :cool:

Quote:

---

Originally Posted by Arxagelos

16 ver of bios guys improves any overclock issues? :cool:

---

Answer: no,nope,nada:(
But,stability is the same as .15 for me.

Any news?

check my personal record out... almost 500FSB @ 1.9v Vmch
water temp was 5°C
maybe tomorrow I set 1.95 to reach 505 fsb and maybe break 15s...

http://img161.imageshack.us/img161/9822/uiasn5.jpg

What about VFSB/CPU VTT Voltage? Is there any mod? Or is VMCH the only way to high FSB? I reach 440 primestable with standard cooling, max was 450 primestable with 10-12°C room temperature, now I'm waiting for a new heatsink.

Well i guess its not necessarie

We need a 1333strap bios! than we can overclock better

Quote:

---

Originally Posted by NtFs

Well i guess its not necessarie

We need a 1333strap bios! than we can overclock better

---

1333strap is fun, but it has low performance, it will be my bench strap for higher cpu clocks, but for 24/7 i will use 1066 strap. 3600mhz 1066 strap has same performance as 3800mhz 1333strap.
But then 1333strap hopefully will alow me to reach 500fsb :P