You can see it on board or the package..
Printable View
You can see it on board or the package..
which part on the board? my package is still the original board which i rmaedQuote:
Originally Posted by deadlock7
At the back of the mobo..
68m0ag119682
Hmm..that's not new!:confused:Quote:
Originally Posted by Shrekogre
thats what i've got.
some1 else tried this 1001?
I've tried it but... still 1.65V :/
@Interloper_PL
Whats u`re number ?
Kind`a strange, that some1 got it some1 not....
Maybe it's a mistake in the 1001 bios.Quote:
Originally Posted by lawrywild
Maybe Shrekogre could set above 1.65v and actually measure voltage with DMM?
Test point: http://www.vr-zone.com/index.php?i=3876
it reads 1.6 at stock
1.93 at 1.85 setting
bios setting
1.55 min to 1.85 max
Whats the date of this bios?
Besides the vmch any improvement with memory timings/dividers or ocing?
never oc cos i got another board already. i just leave it on the test bench cos of you guys since i need to retrieve the bios and try the vmch. will be keeping it in box after today.
Bios chip with sticker labelled
WDH0C
1001
803A
F8 03
And what is the vmch ic labeled with?
13no3la
gah626
thats the chip in which i measured the vmch on
0.1v outQuote:
Originally Posted by Shrekogre
(or your DMM is ;))
What DC-DC chip? Mine is Richtek RT9214
so is this new 1101 is any different from the beta? boot up faster yet?
where to find itQuote:
Originally Posted by Baraka
boots slower than the 903Quote:
Originally Posted by syne_24
It is the little 8 pin chip just above measurement pointQuote:
Originally Posted by Shrekogre
Hmmm...Quote:
Originally Posted by Shrekogre
If you mean the FET, mine is a 60T03 :confused:
rt9214 too
Ok, asus used an other vmch ic on your board. Bye bye bios mod :mad:Quote:
Originally Posted by Shrekogre
That's only the FET, which if anything will be higher spec (for higher voltage) so shouldn't affect the mod :DQuote:
Originally Posted by wurst
awwww. guess i wasn't any help then.Quote:
Originally Posted by wurst