Should be good @ 1.45 Bios for 3.4 Prime stable. Orthos bombs on me, but dual SP2004 instances are fine. Can run all other benches at 1.4250, no problems.
I'm really liking the week 24 6600 I've got here, temps and OC have been quite good to me, not counting the SPD thing with P5W...
well it looks dam good if he's pulling 500MHz FSB, hope the conroes can do the same!Quote:
Originally Posted by zizo
http://people.freenet.de/chris070719...00/E6300-2.jpg
VCore @ 1.3v in Bios (def. 1.325v) on DS3
http://people.freenet.de/chris070719...00/Prime-1.jpg
7/30 packing date already in retail:)
Intel really cranked up production....Wonder when they will pack B3s;)
B3 already....nice
got a L624A today E6400
so far prime stable 3.4GHz 1.45v
just got my cpu this morning but i dont have the rest of my system yet. hopefully they will arrived by nextweek..
here's what i got:
E6300
L623A755
i wonder how this thing overclocked with a DS3 mobo..
Quote:
Originally Posted by dinos22
3.5GHz 1 Hour Prime 1.49v
http://img141.imageshack.us/img141/7...51cloadip0.jpg
Tankguys are receiving there next shipment around the 15th. Hopefully some new Intel chips with different batches. Week 26 or... B3 maybe? *keeps fingers crossed*
E6600 week 24 on a DS3. 366 FSB (3.3 GHz), dual prime stable. Ninja+ air cooling, 58C tempwhile priming (coretemp reports 68C). 1.4875 cpu volts in bios, all other bios settings set to auto. Couldn't make 375 fsb stable. Only bios settings that seemed to help me OC is cpu voltage and I'm not willing to go over 1.5.
E6300
L624A807
Gigabyte DS3
3.4Ghz benchable
3.35Ghz stable
1.425-1.45V
Just picked up my E6600.
Batch number L624A815
Pack Date 07/29/2006
Waiting on the rest of the parts now, but I have prep's my MBoard as per the Sticky.
Its going to be interesting on what sort of speeds I can get out of it.
My 6600 Stepping 5 B1 does 11 hours prime @ 400fsb*9 - 1,465v
But it won't go much higher then that.
11 hours orthos primestable
/Grau
Hmm.. after all those ES' were hitting 4.5ghz, I was hoping more out of Conroe OC'ability.
Looks like Allendale is the way to go though. 6300 @ 3.6 is awesome.
My E6300 OEM is a week 26 chip, so far can oc up to 3.15Ghz at stock volts but have hit the wall and dont know how to get over it:(
Quote:
Originally Posted by SteveS
nice batch i got exactly the same here batch and packdate ;) drop me a PM and tell me how it does. got a p5w DH deluxe on the way to me and then im ready to go :)
i have the same on ds3 mobo.It can do 3240 with stock volts/cooling.Quote:
Originally Posted by SteveS
On phase 440x9 1.6v spi 1m.I think it can do more...
E6400 OEM
FPO: L625A538
Does 3430MHz with stock cooler and 1.325V (SuperPI 32M).
With Tuniq Tower 120 and 1.49V it ran SP2004 at 3640MHz (455x8).
455FSB seem to be the maximum stable frequency for my 6400C3 sticks.
I must test it on Biostar too.
Rick from Biostar sent me a new bios for the board, which allows FSB up to 600FSB (instead of 500FSB). It also seems that some of the chipset latencies has been changed too..
http://www.armada.fi/E6400_OEM/E6400...z_SP2004-2.gif
please tell me - is it better a have a CPU with a lower batch or is it better to have a CPU with a higher batch? Or perhaps there is no rule. I have a week 25 CPU (E6400) batch A287. I can't test it right now, as my MOBO will be delivered to me on Tuesday. I'm curious, hence I've decided to ask the question.
@The Stilt
Please post your results with the new BIOS on the Biostar, when it's done.
@the stilt
very nice result..
is that board modded?
my p5wdh can only do 400FSB.. with my E6300 anything higher it will not boot..
Vmch@1.65v
maybe u could share me what setting u use in bios to get over 450FSB.
Hi guys,
Just read in another thread someone saying they got their Conroe (E66), they took a pic of the chip and it read L623A738 (link to image).
Yet mine says L623A790. So I thought some "in the know" guy here will know!..
It may not be a big thing, but what does that mean? Is it manufacturer dates etc. Or revisions. I've searched around. But "Conroe Numbers" brings up overclocking scores! (shock! he he)
On a side note... I need to let out some anger.... ARRRRRRRRRGH It's taking me too long to buy this system of mine. It's f'kin annoying. I can't help if I ain't loaded! JESUS!
I'm ok now.
L=plant #, Malaysia
6= year
23= week
A738 = batch number
Ăśber. Cheers m8.
There's no known bad batches are there?? lol.
This is on Biostar:
http://www.armada.fi/E6400_OEM/E6400_4.2GHz_SPI8M.gif
VapoLS & 1.525V
Yes, that is still with the "old" A803 bios.
Stock heatsink on MCH too ;)
Cooling down the MCH has a clear effect since I cannot set tRP to 3 CLK and tRAS to 4 CLK with the stock heatsink like I could with MCX-159R :D