x1900 All-In-Wonder! @ 40668 3d01 on stock heatsink.

Printable View

Show 100 post(s) from this thread on one page

09-23-2006, 08:54 AM
ferds

i just put the AS5 15mins ago but same results. also did put some AS5 on the mosfets. though it help lowers my idle temp from 53C to 48C.
09-23-2006, 12:41 PM
IvanAndreevich

Nice core on that card.. that memory sucks, though.
09-23-2006, 12:53 PM
fhpchris

Quote:

Originally Posted by ferds

i just put the AS5 15mins ago but same results. also did put some AS5 on the mosfets. though it help lowers my idle temp from 53C to 48C.

Changing the stock cooler really helped my memmory results.

I think I only got ~550 with the stock cooler...
09-23-2006, 05:54 PM
ferds

i dont think the stock cooler is the problem. even at 10mhz Oc on the mems still lock hard my desktop. i dont want to believed that the mems are broken or damaged with my initial OC.:( :(
09-23-2006, 08:49 PM
tvdang7

Quote:

Originally Posted by ferds

i dont think the stock cooler is the problem. even at 10mhz Oc on the mems still lock hard my desktop. i dont want to believed that the mems are broken or damaged with my initial OC.:( :(

hope not but it might be true.
09-23-2006, 09:12 PM
ferds

:( :( :( :( :( :(
09-23-2006, 10:51 PM
fhpchris

Quote:

Originally Posted by tvdang7

hope not but it might be true.

The stock cooler gets very hot, and the thermal pads on the ram only heat the ram up, not cool it down.

I would dobut you hurt the ram. Check your voltage settings and temps.
09-29-2006, 09:33 AM
Lizardus

i have aiw x1900 and accelero x2 (modded to fit in aiw),
accelero max rpm (about 2000), temp in idle 39-37C on core, ambient 38C,
max with stock voltage on memory : 585Mhz, with 2.16V ~595mhz, buuu:( even with ~2,2v i have about 605mhz......
core with 1.3V about 665mhz , with 1,4V about 670-675mhz...then temp reach in ati tools 60C on core max, 68C on voltage regulator.......

If i overclock fast mem from stock 477 to for example 570mhz graphics crach, artefact on all monitor.....i could overclock to for axample 570 in steps for 20mhz add....

EDIT: ofkoz i have 80mm fan on vreg

EDIT2: very strange ....... i put off cooler (X2) and add some thermal past on memory , then again in ati tools 2.16V/2.16V and ... and it find my max memory on 700mhz!!, on 706mhz system frozen and i restarted comp....after restart aagain it find max memory abaout 585-605mhz :(...... WFT?

some tips for me:( ?
09-30-2006, 05:10 AM
Lizardus

WTF........
one time ati tool stop on max mem ~700mhz 2.151V/2.151V , restart comp and this same voltage max 600mhz.......Now..I dont know what i must doing.....:banana::banana::banana::banana:..
10-14-2006, 03:05 PM
fhpchris

Sometimes moving up slowly helps, you could always try more voltage on ram, I run 2.25 on GDDR4 ;)
10-14-2006, 05:07 PM
tvdang7

Quote:

Originally Posted by fhpchris

Sometimes moving up slowly helps, you could always try more voltage on ram, I run 2.25 on GDDR4 ;)

i like ur "web surfing rig" man i didnt know mozilla firefox was that gfx intensive.:D
10-21-2006, 11:27 PM
fhpchris

I was just contacted by a fellow X1900 AIW owner who runs similar clocks to what I bench with and his card seems to be dead.

He ran it @ 1.3vgpu and 700+ core for a few months daily, and it will not output video now.

The whole time he had a waterblock on it (temp never getting to 50c) and fans over the mems and vregs.

I know my card will artifact @ CS:S when it gets warm, even under stock speeds and voltages,(works fine @ 100% fanspeed ~45c load) so this is just a warning to other people who like to run 700+ core every day :) He also ran 2.25 on his ram every day.

Show 100 post(s) from this thread on one page