Quote:
Originally Posted by AndreYang
for both chips?
Quote:
Originally Posted by AndreYang
for both chips?
this is not a vdroop! the board is undervolting a bit. vdroop is between idle and load.
Quote:
Originally Posted by PcCI2iminal
both chip? only cpu voltage
CPU Voltage Bios 1.5V Windows 1.43~1.44V full speed 1.41V
the droop(load) is the same for Kentsfield and Conroe?Quote:
Originally Posted by AndreYang
Quote:
Originally Posted by AndreYang
i am confused.... arent them PCI X?
edit. i thought they was... i gotta stop listenin to my mate. he is wrong about just about everything!
Undervolting isn't all that nice, but vdrop is very satisfying. Seems that their 2nd 8phase m/b is better in this area than my P5WDG2-WS rev1.02g.Quote:
Originally Posted by AndreYang
@AndreYang
Is it possible to send me a copy of the BIOS?
I am actually more curious to see them SAS Drives in action now ;)
Quote:
Originally Posted by PcCI2iminal
Yes.......conroe and kentsfield are the same voltage and vdroop.
And where is 500fsb without mods :p: :D
only issue so far with this board :
the 32 M time is not so overwhelming...
we all know andrés skills in selecting nice cpus and decent ram.
but :
asus p5 wdg2-ws pro - 6600 ES step 5 @ 3809 FSB 423
_____________________________
best core 32 M........ 14.39
compared to Dennies (Guess 2098)
asus p5wdh- 6600 ES step 5@ 3785 FSB 420
____________________________
32M ..........13.26
o.k. he ran a dual superpi ..but more than one minute difference ?
Quote:
Originally Posted by mine
I use Dual 32M...............not single 32M
:bows:Quote:
Originally Posted by AndreYang
Agreed. Starting to sound like 2cpu or Storage Review in here :lol:Quote:
Originally Posted by Kunaak
Quote:
Originally Posted by mine
I test single SuperPI 32M again. It's the same tha Denny?
http://www.iamxtreme.net/andre/WS-Pro/WS-423-2.JPG
yah ... both boards seem to be rather equal now and denny used 4:5
thanx andré
Quote:
Originally Posted by AndreYang
good to know
thanks again
:toast:
Looks like a nice board. Too bad the PCIe slots are spaced like that (no containers on the cards), must wait for DFI.
Is there any release date for this yet? Would like to hold off buying a board for now if this one is around the corner.
Quote:
Originally Posted by Kesnel
I am not sure when it will be released in the market but ASUS told me the date is after August.
Thanks for the info Andre. :)
I shall go for a cheaper board as a stopgap and wait I think.
Nice results. :banana:
Why the release date take so long ?
After August... :(
do some PC mark with those drives and that quad core.............major ownage coming up ;)
Nice review! I'm seriously considering this board or P5W DH in addition to an Areca raid card.
Yet another dilemma is if i get the WS Pro, i would need the PCI-X raid card. Hmmm maybe i should get a PCIe raid card instead, forget about SLI so i can run the raid card on either board and also change mobos at will without worries in the future... :rolleyes: