Cat 6.6 official is out!

Printable View

Show 100 post(s) from this thread on one page

07-04-2006, 01:45 PM
Doomeous

I'd try it on my sapphire A9R580, but 6.6 breaks the use of Dell monitors... SO I cannot use the 6.6's as they turn my monitor off.. Sucks, wish they would get that stuff fixed.
07-04-2006, 06:56 PM
Blacklash

Overdrive only gets the master card as Crossfire runs async. If you want to overclock both cards the best option currently is still ATi Tool 0.25 beta 14.

http://www.techpowerup.com/downloads/259
07-06-2006, 03:04 AM
sora3

Quote:

Originally Posted by Robertus

Hi there,

Has anyone got any information as to whether these drivers allow X1800XTs to be crossfired without a mastercard?

Nope, they don't work without a mastercard. Tried and it just gave me the "please check that you have an ATI Radeon X1800 Crossfire Master card in the slot and connect the dongle as shown in the manual"

And dongleless Crossfire for X1900GT DOES NOT work either...
07-06-2006, 04:36 AM
Rovtar

anybody have problems with this drivers?

while i play cs my computer freezes and then reboot:S when i receive solution by Microsoft it says that "Error caused by a video device driver"
07-06-2006, 04:43 AM
cantankerous

lol nice sig!
07-06-2006, 04:48 AM
James Cook

I have read thet guys were able to run CF on 2 x 1800 GTO on ATI chipset. Probably it is possible to replace Device ID of 1800XT with 1800GTO and try to run in CF?
07-06-2006, 06:41 AM
MikalCarbine

Is the chuck patch compiled in these drivers?
07-06-2006, 08:08 PM
sora3

Quote:

Originally Posted by James Cook

I have read thet guys were able to run CF on 2 x 1800 GTO on ATI chipset. Probably it is possible to replace Device ID of 1800XT with 1800GTO and try to run in CF?

No, the Device ID is always imprinted on the core, not in the drivers.
07-07-2006, 01:57 AM
smith_6079

Quote:

Originally Posted by MikalCarbine

Is the chuck patch compiled in these drivers?

Exactly what I was about to ask.

Quote:

Originally Posted by Doomeous

I'd try it on my sapphire A9R580, but 6.6 breaks the use of Dell monitors... SO I cannot use the 6.6's as they turn my monitor off.. Sucks, wish they would get that stuff fixed.

Hm....I used the 6.6 betas for a little bit and it worked fine on both my 2005fpw and 2007fpw. Uninstalled them because the betas didn't have Chuck. Hope the official ones do or at least a third party source.
07-07-2006, 05:01 AM
MikalCarbine

hmm

http://www.techpowerup.com/downloads/316

Cat 6.6 Beta with Chuck Patch and Conroe patch

Would running that on an nForce system cause problems?:confused:
07-07-2006, 09:18 AM
Blacklash

Most say, and I concur, if your interest is the Cats with the chuck patch, use 6.3 with the 6.3 patch.
07-08-2006, 05:13 AM
LowRun

Quote:

Originally Posted by Tony

I will try and have a play tomorrow if i can with my 1800XT's ;)

So, did you have a chance to try it? i'd be very interested in your results.

Thanks
07-08-2006, 06:27 AM
MikalCarbine

Quote:

Originally Posted by malficar

Most say, and I concur, if your interest is the Cats with the chuck patch, use 6.3 with the 6.3 patch.

Why is this?
07-08-2006, 06:35 AM
xs64

Shame for ATI , they still cant make CF Dongless. That's why alot of ppl will buy SLI and Nvidia :slapass:
07-09-2006, 08:09 PM
smith_6079

Quote:

Originally Posted by malficar

Most say, and I concur, if your interest is the Cats with the chuck patch, use 6.3 with the 6.3 patch.

I don't know about that. 6.5+Chuck=great performance and graphics for me. In fact, I'm currently using those right now.

Does the 6.3+Chuck still beat 6.6+Chuck? The 6.6's seem to be a pretty good improvement for a driver.
07-14-2006, 03:46 AM
Gorod

wrong post sorry

Show 100 post(s) from this thread on one page