600MHz CAS3 done with 6400C3s 2*1GB : WR !

Printable View

Show 100 post(s) from this thread on one page

06-26-2006, 11:37 PM
Evilsizer

OMG dude thats just insane compared to the other c3's. Did you buy these or were they given to you?
06-27-2006, 12:45 AM
jmax_oc

Quote:

Originally Posted by bachus_anonym

... which looks like it confirms that something is off when using at 1333 and RAM is not clocking as high as we have been seeing on those BadAxes :fact: I remember that VictorWang was saying something similar in his thread about 1100+ OC... That results were worse compared to 1066.

Thanks for posting that, macci! I just think that DDR2-1150 or DDR-1200 8-3-3-3.0 is not possible, especially with 2.5-2.7v, If at all... It's just way to high!

Happy to read such realistic and intelligent words.
BadAxe doesn't give us real memory's configuration.
That explais my regular asking for comparison between badaxe and other mainboards
06-27-2006, 02:13 AM
Punisher!

Quote:

Originally Posted by jmax_oc

Happy to read such realistic and intelligent words.
BadAxe doesn't give us real memory's configuration.
That explais my regular asking for comparison between badaxe and other mainboards

Yeah...
06-27-2006, 05:47 AM
hipro5

Quote:

Originally Posted by bachus_anonym

... which looks like it confirms that something is off when using at 1333 and RAM is not clocking as high as we have been seeing on those BadAxes :fact: I remember that VictorWang was saying something similar in his thread about 1100+ OC... That results were worse compared to 1066.

Thanks for posting that, macci! I just think that DDR2-1150 or DDR-1200 8-3-3-3.0 is not possible, especially with 2.5-2.7v, If at all... It's just way to high!

Cpu-z and clockgen with combination with the deviders and the mobo, show WRONG numbers as for the Ram frequency as for the Bad Axe.....1333 and 25% and the rams at 667MHz, the frequency of the rams are 1:1....and NOT 520MHz(1044MHz DDR) as it is shown as 4:5......People have posted a LOT of resaults lately with D9 Faties @ 530MHz+ with Cas 3-2-2-1.....NO WAY....check it out you guys....;)

EDIT: If with the above combination we chose the 533 Ram config, the system works the Rams at LOWER frequency than the fsb....almost 5:4 (CPU:Ram).......
06-27-2006, 11:21 AM
deadlock7

So people must know that Bad Axe doesn't work fine at 1333 so the results cannot be compared with the other m/bs.
Tyrou your results are very nice although..
06-27-2006, 12:05 PM
mine

Quote:

Originally Posted by Tyrou

sure, I've got a backup BadAxe for this purpose :D

Vercingetorix :woot:

be prepared
06-27-2006, 01:17 PM
jmax_oc

Quote:

Originally Posted by hipro5

Cpu-z and clockgen with combination with the deviders and the mobo, show WRONG numbers as for the Ram frequency as for the Bad Axe.....1333 and 25% and the rams at 667MHz, the frequency of the rams are 1:1....and NOT 520MHz(1044MHz DDR) as it is shown as 4:5......People have posted a LOT of resaults lately with D9 Faties @ 530MHz+ with Cas 3-2-2-1.....NO WAY....check it out you guys....;)

EDIT: If with the above combination we chose the 533 Ram config, the system works the Rams at LOWER frequency than the fsb....almost 5:4 (CPU:Ram).......

Give us more explicite examples.

I'm 100% agree with you by saying that more than 550MHz cas3 won't be easy to reach.
06-27-2006, 01:20 PM
sierra_bound

If you set the strap on the Bad Axe to 1333MHz and memory to 667MHz, you should be running 1:1. But if you check CPU-Z, it says you're running 4:5. So either the BIOS is wrong or CPU-Z has a bug.
06-27-2006, 01:47 PM
grimREEFER

could it be dram throttling or something?
06-27-2006, 01:58 PM
sierra_bound

Don't know, but something is fishy on Bad Axe because people can only get the super memory speeds with 1333 strap.
06-27-2006, 06:14 PM
bachus_anonym

Quote:

Originally Posted by hipro5

Cpu-z and clockgen with combination with the deviders and the mobo, show WRONG numbers as for the Ram frequency as for the Bad Axe.....1333 and 25% and the rams at 667MHz, the frequency of the rams are 1:1....and NOT 520MHz(1044MHz DDR) as it is shown as 4:5......People have posted a LOT of resaults lately with D9 Faties @ 530MHz+ with Cas 3-2-2-1.....NO WAY....check it out you guys....;)

EDIT: If with the above combination we chose the 533 Ram config, the system works the Rams at LOWER frequency than the fsb....almost 5:4 (CPU:Ram).......

Thanks George! I'm 100% sure it's the case as well in ALL of those below:

DDR2-1120 8-3-3-3.0, DDR2-1100 8-2-2-3.0, DDR2-1150 1-3-3-3.0, DDR2-1066 5-3-3-3.0

All on 975X BadAxe, Conroe and at which appears to be 1333 strap with 4:5 ratio...

Quote:

Originally Posted by jmax_oc

Give us more explicite examples.

I'm 100% agree with you by saying that more than 550MHz cas3 won't be easy to reach.

Well, I think that even DDR2-1000 8-3-3-3.0 is quite a lot to ask at 2.5-2.7v :fact: Those new Microns D9XXX are great, but that THAT great yet :)

EDIT: By posting this, I do not intend to rain on none of the above guys' parades... I would just advise to double-check (triple-check If neccesary) to make sure that results are credible and more importantly, possible. Run few extra benches at and compare results before getting super-excited. Those results at CAS3 are way beyond anything else we've seen so far from new D9xxx and should sound an "alarm" already ;) Just a thought...
06-27-2006, 09:20 PM
ahmad

2.75v.. nice. BH-5 of DDR2 or what.
06-28-2006, 12:44 AM
johnnyliu3377

OMG! http://www.xtremesystems.org/forums/...ilies/bow2.gif
06-28-2006, 10:35 AM
Punisher!

Quote:

Originally Posted by bachus_anonym

Thanks George! I'm 100% sure it's the case as well in ALL of those below:

DDR2-1120 8-3-3-3.0, DDR2-1100 8-2-2-3.0, DDR2-1150 1-3-3-3.0, DDR2-1066 5-3-3-3.0

All on 975X BadAxe, Conroe and at which appears to be 1333 strap with 4:5 ratio...

Well, I think that even DDR2-1000 8-3-3-3.0 is quite a lot to ask at 2.5-2.7v :fact: Those new Microns D9XXX are great, but that THAT great yet :)

EDIT: By posting this, I do not intend to rain on none of the above guys' parades... I would just advise to double-check (triple-check If neccesary) to make sure that results are credible and more importantly, possible. Run few extra benches at and compare results before getting super-excited. Those results at CAS3 are way beyond anything else we've seen so far from new D9xxx and should sound an "alarm" already ;) Just a thought...

Sad but true... let's start seeing something TRUE!
06-28-2006, 10:56 AM
Makubex_GB

Damn 2.75v! But great speed though, very nice man! :toast:
06-28-2006, 12:28 PM
Redbeard

Quote:

Originally Posted by hipro5

Cpu-z and clockgen with combination with the deviders and the mobo, show WRONG numbers as for the Ram frequency as for the Bad Axe.....1333 and 25% and the rams at 667MHz, the frequency of the rams are 1:1....and NOT 520MHz(1044MHz DDR) as it is shown as 4:5......People have posted a LOT of resaults lately with D9 Faties @ 530MHz+ with Cas 3-2-2-1.....NO WAY....check it out you guys....;)

EDIT: If with the above combination we chose the 533 Ram config, the system works the Rams at LOWER frequency than the fsb....almost 5:4 (CPU:Ram).......

Thanks for this, awesome information for everyone. We are doublechecking this in the labs right now. ευχαριστίες, φίλος!
06-28-2006, 01:04 PM
breakfromyou

wow, thats pretty sick.

how high can you get it to clock@4-4-4?
06-28-2006, 07:09 PM
ScottFern

How long can you expect these sticks to last at 2.75v? I don't feel like burning this $450 ram.

Show 100 post(s) from this thread on one page