3.3v line on PSUQuote:
Originally Posted by TheKing
I'm also interested in the CPU PLL voltage mod.
Printable View
3.3v line on PSUQuote:
Originally Posted by TheKing
I'm also interested in the CPU PLL voltage mod.
Awesome resullts! :eek: Congratulation guys! :toast:
I'm very interested in that, too! Thanks in advance.Quote:
Originally Posted by Zannema
Thanks a lot all:)
@Zannema, Stapler & funkflix
Please see Hideo's CPU PLL Voltage vmod here.
Cheers:toast:
Thanks mate! :up:Quote:
Originally Posted by fredyama
Quote:
Originally Posted by dinos22
i am scared to think how good his time would be if he had Micron DDR3 stuffQuote:
Originally Posted by Gautam
with only 850MHz 7-6-5-15 he would easily beat that time >>> also high FSB for the first time i know affects SuperPi from my recent testing with Asus P5KC hybrid DDR2/3 board so a CPU capable of astronomical FSB tweaked well would be amazing too [EDIT] errr 600MHz FSB on that run....well well well :D i think i know why that was quick >>> it may not be just P35+DDR3 then hehehe
now with Micron RAM 850 at those timings is nothing.....people will bench past 900 easily :D :up: it will be amazing what it will do for superpi :D
850 6-5-5-15 is very doable, check this SS (not mine, don't pay attention to the SP2004 clock it's not reporting right):
http://www.ocxtreme.org/opb/prime95end28hours.jpg
nice sticks OPB has for sure
well basically what i'm saying is that DDR3 is taking off where DDR2 left off IN 32M
in 1M times are still slow so 6-5-5- might actually be more beneficial there because of tight timings :)
@dinos22 & Stapler
We appreciate your suggestion but this thread is not for if and what results.
Perhaps, you guys want to continue posting your views in more appropriate thread where the actual DDR3 32M PI results reside.
Thank you.
out of breath :clap: :clap: :clap:
Thank fredyama-san;)Quote:
Originally Posted by fredyama
yes you are right :up:Quote:
Originally Posted by fredyama
Congrats Hideo-san, very good work!!:clap:
Very nice Mhz great fsb ! Congratulations 'team japan' san.
Congratulations team japan
Sorry, for the off topic, didn't meant to clutter Hideo's thread.Quote:
Originally Posted by fredyama
Thank you for sharing the CPU PLL mod, unfortunately my P5K came DOA.
congrats :up:Quote:
Originally Posted by fredyama
Just got my first E6850 and same batch as yours
E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07
:D
@ fredyama: Have you got a CPU PLL Voltage vmod for p5k-e?;)
I believe this is the one Hideo uploaded for P5K-E.Quote:
Originally Posted by Zannema
Please make sure it with your M/B though;)
Nice cpu fredyama , i believe have the same :D
4.1ghz on air 1.55V :D
Quote:
Originally Posted by fredyama
Thank you fredyama-san:up:
@ fredyama
MEM: 1:1, 4(5)-4-4-4-4-4-25-4-9(10)10-10-4-8-4-4-2 (Memset)
I believe this is T2?
Could you try with bios 0603, how far you can go on T1?:D
perhaps not that far, but i think you can still go far :D
greetz!
Thanks again all for your compliments:)
@dinos22 & Stapler
Thank you for your kind understanding:up:
Thank you so much eva2000-san:)Quote:
Originally Posted by eva2000
As NewBeetle pointed out, how high FSB we can get out from it at 1.35Vcore x6 seems to be a key factor under extreme cooling:D ;)
As you know, not all L723A347 is as good as TAM's so you should grab them all while they are available:D
You are most welcome, Zannema-san:)Quote:
Originally Posted by Zannema
Wish you best of luck with your awesome E6700:toast:
Here are some more results-- though mediocre one after seeing that of TAM & Hideo:D
By picoo
Super PI Mod 1M: 9.281s @5469.5MHz （FSB 607.7×9.0）
http://wind.ap.teacup.com/picoo/img/1187398045.jpg
(Setup)
CPU:Memory＝1:1
Ratio CMOS Setting : x9
FSB Frequency : 560MHz@boot
PCIE Frequency : 100
DRAM Frequency : DDR2-1160MHz
DRAM Command Rate : Auto
DRAM Timing Control ～ : M（4-4-4-4～A）-D、E-1-1000mV、D-D
CPU Voltage : 1.800V（Actual）
CPU Voltage Danper : Enabled
CPU PLL Voltage : 1.80V
DRAM Voltage : 2.600V（Actual)
FSB Termination Voltage : 1.50V（BIOS）
North Bridge Voltage : 1.80V（Actual）
CPU：Core 2 Duo E6850（L723A317）
M/B： ASUS P5K Deluxe/WiFi-AP（BIOS:0501）Vcore・Vdimm・Vnb mod、N-Chipset under watercooling
CPU cooling: LN2
Chipset cooling: Water temp 12℃（assisted by airconditionner）
Northbridge cooling: Alphacool SNB-N Silver Northbridge
PUMP / Alphacool AP900 12V + Voltage Module12-24V AP step-up adaptor
RADIATOR / Alphacool NexXxoS XtremeⅢ/120ｘ38ｍｍ(2000rpm)ｘ3
RESERVOIR / Mitron Interlink WT-TB-B, TUBE / innovatek(500898) 10/8mm
Southbridge cooling: On air with heat sink from P5B-Deluxe
Memory： Team Xtreem PC2-9600(DDR2-1200) CL5 1GBx2 with Heatsink:Thermalright HR-07 X2
VGA: Matrox MillenniumG450/D32PDV（PCI）
HDD: HDS728080PLA380 80GB
POW1: OCZ Power Stream Power Supply 520W（for Water cooling）
POW2: Zippy-720PE（for system）
OS: Server2003 Enterprise Edition
BED: V-TEC ARC Bed Rev.5.0 Professional by Vigor
Copper pot: kuri-Pro4 by TAM
System Rack: B-ONE x2
Thermal grease: ArcticSilver5
By fredyama
modPI 1.5 XS 1M: 9.265s @5462.7MHz (FSB607.0MHz x 9)
http://premium1.uploadit.org/fredyam...PI1M9.265s.gif
(Setup)
M/B: ASUS P5K#2 75M0AC298*** (Bios 0414, Vcore mod, Vdimm/Vcpu pll clip mod & Vdroop Pencil mod)
M/B Bed: V-TEC ARC Bed Rev.3.32 by Vigor
CPU: Core 2 Duo E6850 L723A943/2L72356/7A1***
CPU Cooling: LN2 KuriPro4 by TAM
Chipset Cooling: Normal
Memory: Team Xtreem PC2-9600#2 1GB x 2
VGA: ATI 3D Rage PCI 8MB
HDD: IBM DTLA-307030 PATA 30.7GB
Power Supply: OCZ PowerStream 520W
Vcore: 1.906～8V(Actual), Vdimm: 2.677V(Actual), Vnb: 1.730(Actual), Vcpu pll: 2.405V(Actual), Vio: 3.488V(Bios), Others: Max Bios value
OS: Windows Server 2003
MEM: 1:1, Bios setting: 4-4-4-4-4-4-25-4-4-4-E-A-A
Others: FSB555@boot, SetFsb2.0.b.15f, MemSet3.3, ERAM2.11, AutoGear, MAXMEM=600, Ceramique by Arctic Silver
Cheers:toast:
Very nice speed and time by picoo. :up:
And very very well done SuperPi time by yourself, Fred-san. :clap: It's a pleasure to finally see you back into action. :D It seems your E6850 hunt has already been quite profitable.
nice 6850s :D
Flipping heck. Just got a E6850 thats doing 4.1 @ 1.5 on water. I think user had problems with mobo. Im awaiting a new mobo to see what i can get it to do on water!