LittleDevil SS Worklog

Printable View

Show 100 post(s) from this thread on one page

11-04-2006, 11:02 AM
Ssilencer

Clean work as always, I just prefer to make the phase cases at the same size as the computer case.
11-04-2006, 11:23 AM
4Qman

Superb match, Clean and pro stlee all the way. Hows things going regards Load temps LD.
11-08-2006, 06:54 AM
LittleDevil

Quote:

Superb match, Clean and pro stlee all the way. Hows things going regards Load temps LD.

thanks, he will use voltcraft K101 digital thermometer.

Regards
11-08-2006, 08:33 AM
Patriote

Omg These Units looks so clean! I'd Buy one for sure! If only i had the money... How much would thoses cost ?
11-08-2006, 10:17 AM
LittleDevil

Quote:

Omg These Units looks so clean! I'd Buy one for sure! If only i had the money... How much would thoses cost ?

Send me pa PM if you want to know price for unit.

regards
11-10-2006, 12:22 AM
kayl

Quote:

Originally Posted by LittleDevil

Little Update.

http://ld-phasechange.com/images/GrinTomato's_SS/7.jpg

regards

what mobo is that one, how come the NB cooler is missing :confused:
i noticed in the finished pics the theres a stock heatsink on the NB, is that the same mobo or your mobo for testing?
98g of charge hey, little more than the commercial units which is what I would expect, jin said he puts similar amounts of refrigerant into his units.
be interesting if for your next build if ya charge with that same amount unit gets good temps and holds load. :toast:
11-10-2006, 01:25 AM
johann

Quote:

Originally Posted by kayl

what mobo is that one, how come the NB cooler is missing :confused:
i noticed in the finished pics the theres a stock heatsink on the NB, is that the same mobo or your mobo for testing?
98g of charge hey, little more than the commercial units which is what I would expect, jin said he puts similar amounts of refrigerant into his units.
be interesting if for your next build if ya charge with that same amount unit gets good temps and holds load. :toast:

Kayl I dont think we will ever be able to charge on weigth. I have had systems very similar with very different charges. Unless you can get the units absolutely identical I dont think it could be done and still have every unit running as good as it can.

Even 1gram up or down can make a massive difference in my experience.
11-10-2006, 01:44 AM
LittleDevil

Quote:

Kayl I dont think we will ever be able to charge on weigth. I have had systems very similar with very different charges. Unless you can get the units absolutely identical I dont think it could be done and still have every unit running as good as it can.

Even 1gram up or down can make a massive difference in my experience.

Yes agree with that, in that unit is about 115g for 402 and it works very well.

That mobo is Asus P5WDH Deluxe 975 chipset.

regards
11-13-2006, 01:35 AM
LittleDevil

Here is another one, Metalic Black Single Stage:

http://ld-phasechange.com/images/MetalicBlack_SS/1.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/2.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/3.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/4.jpg

regards
11-19-2006, 11:59 AM
LittleDevil

Unit for my fried is finished, here are some pics abd results...

http://ld-phasechange.com/images/GrinTomato's_SS/14.jpg

http://ld-phasechange.com/images/GrinTomato's_SS/15.jpg

X6800 @ 4712Mhz @ 1,81V, motherboard fully moded

http://ld-phasechange.com/images/GrinTomato's_SS/16.JPG

http://ld-phasechange.com/images/GrinTomato's_SS/13.jpg

http://ld-phasechange.com/images/vmod/p5b_deluxe/2.jpg

thanks
11-19-2006, 08:55 PM
kayl

did you do the vmods LD?
all done but vdrop, the vcore one is quiet hard to do i removed mine didnt trust it :mad:
what are temps like with a 32m run SPI?
11-20-2006, 01:57 AM
LittleDevil

Quote:

did you do the vmods LD?

Yes, i make all those vmods, why?

@spi 16MB X6800 @ 4562Mhz @ 1,81V

http://ld-phasechange.com/images/GrinTomato's_SS/17.jpg

thanks
11-20-2006, 03:05 AM
Nosfer@tu

Quote:

Originally Posted by LittleDevil

Yes, i make all those vmods, why?
thanks

He is asking because he thinks the Vcore was a hard mod :rolleyes: ;)
11-20-2006, 07:10 AM
kayl

Quote:

Originally Posted by Nosfer@tu

He is asking because he thinks the Vcore was a hard mod :rolleyes: ;)

spot on:toast:
LD ya need either the 32m run and also dual 32m run to make sure ;)
small runs dont load system much at all.
for the vmods the vmem and nb are easier as have IC to solder to.
but vcore and vdroop tinny resistor and capacitor mods i find harder.
i need thinner wire and that mag lamp to do mine ;)
hard to see the small stuff, and get a good join so not to break off later.
12-07-2006, 02:18 PM
LittleDevil

Metalic Black Single Stage and temps on new load tester.

http://ld-phasechange.com/images/MetalicBlack_SS/5.jpg

regards
12-07-2006, 06:38 PM
Ssilencer

Quote:

Originally Posted by LittleDevil

Metalic Black Single Stage and temps on new load tester.

http://ld-phasechange.com/images/MetalicBlack_SS/5.jpg

regards

Edited, Post after dinner with alcohol is not good :p
12-07-2006, 06:47 PM
jinu117

Uhmmm I thought I saw "W" on his kill-a-watt of European version? (I think that one looks cooler than Kill a watt though... damn.)
12-07-2006, 07:27 PM
Ssilencer

Quote:

Originally Posted by jinu117

Uhmmm I thought I saw "W" on his kill-a-watt of European version? (I think that one looks cooler than Kill a watt though... damn.)

Edited, yes, it is watts, not volts :p
12-07-2006, 07:58 PM
kayl

Quote:

Originally Posted by Ssilencer

Edited, Post after dinner with alcohol is not good :p

heeheh, i got to read it before ya changed;)
dinner with alcohol must have been a red wine, and not the clear stuff.
215w not bad LD, few members have these loaders now with thermal cutout.
wish i had one:(
12-07-2006, 11:20 PM
LittleDevil

Forgot to tell i had -22,5°c on copper block (load tester) at 215W...

regards
12-08-2006, 02:45 AM
kayl

nice, can we see some more pics of the dummy load.
12-08-2006, 05:35 AM
LittleDevil

Picture of load tester... ;)

http://ld-phasechange.com/images/load_tester/1.jpg

regards
12-08-2006, 05:56 AM
jinu117

Bit off topic. But I do have design ready to be CNC machined with easy insulation and assembly for consistent result... :)
I have so many projects for this poor cnc machine it's not even funny... :P
12-08-2006, 08:00 AM
kayl

that looks nice :toast:
where did you attach the thermal cutout?
12-16-2006, 03:13 PM
jamex

Very interesting

So littledevil, I'm very insterested in your units. I'm definetly not a n00b but I've never done the step towards phase change, my only concern is always condensation, I thought about one of those aseteks or others, but I don't like their method of avoiding condensation.

I think you are using other methods tho avoid it, what are they? please let me know, maybe I will change my mind and buy one of yours.

Thanks man!!!! :stick:

:toast:
12-17-2006, 05:37 AM
Pipi

Neoprene or armaflex is usually used in LD's systems. I have seen him using liquid electrical tape and he says it rocks.
12-17-2006, 06:44 AM
giraffen

Quote:

Originally Posted by LittleDevil

Picture of load tester... ;)

http://ld-phasechange.com/images/load_tester/1.jpg

regards

Nice work :clap: What kind of sensor is it?

/Jesper
12-17-2006, 12:25 PM
Jort

its a cardridge heatload :)
12-22-2006, 02:46 AM
LittleDevil

V2000 Kits

Today i got bottoms for V2000 Phase Change Kit.

http://ld-phasechange.com/images/V2000_kit/1.jpg

http://ld-phasechange.com/images/V2000_kit/2.jpg

regards
12-24-2006, 11:31 AM
LittleDevil

Rotary System

Here are new three ''sisters'' :p:

http://ld-phasechange.com/images/OcT...d/Rotary/2.jpg

Regards
12-24-2006, 01:46 PM
tim-

cute. what model of compressor?

you may have one left for sale? please pm me.
12-24-2006, 02:10 PM
Brettbeck

Are those powerfull single-stages LittleDevil?
12-24-2006, 02:31 PM
LittleDevil

Quote:

Originally Posted by tim-

cute. what model of compressor?

you may have one left for sale? please pm me.

Done ;)

Quote:

Are those powerfull single-stages LittleDevil?

Yes ;)

Regards
12-24-2006, 02:45 PM
Brettbeck

Quote:

Originally Posted by LittleDevil

Yes ;)

How powerful ;) ?
12-24-2006, 02:47 PM
LittleDevil

Quote:

Originally Posted by Brettbeck

How powerful ;) ?

1HP, you will see results very soon.

Regards
12-24-2006, 03:05 PM
Brettbeck

Quote:

Originally Posted by LittleDevil

1HP, you will see results very soon.

Regards

Cool! Look forward to seeing some results :D!
12-25-2006, 03:31 AM
cold_ice

What gas will you use?
12-25-2006, 04:32 AM
Moc

The compressor is a GK151P for R410A so i think he will use R410A.
12-25-2006, 07:06 AM
LittleDevil

Quote:

Originally Posted by cold_ice

What gas will you use?

Probably r402a, but i will try both r402a and r410a to see the difference.

regards
01-20-2007, 12:27 PM
LittleDevil

Here you can see how V2000 kit fits under Lian-LI V2000 :)

http://ld-phasechange.com/images/tjelaw's_V2000b/7.jpg

Pics of rotary units tomorrow.

regards
01-20-2007, 12:42 PM
Brettbeck

Nice. That condenser looks tiny!!
01-20-2007, 03:41 PM
quintus

verry nice LD!!!

make me a small favor pls! is there any site with the pdf for the electrolux compressors? i try to find the height of the mp14fb but no way! imposible!

thx
01-20-2007, 03:45 PM
LittleDevil

Quote:

make me a small favor pls! is there any site with the pdf for the electrolux compressors? i try to find the height of the mp14fb bot no way! imposible!

I will measure it tomorrow and tell you how high is it, but i can tell you around 22cm ;)

regards
01-21-2007, 01:36 AM
tjelaw

lookin good LD ;)
01-21-2007, 06:19 AM
Barnsley-Bill

love the look of the unit with the Lian-LI V2000 well done mate :)
01-21-2007, 07:25 AM
LittleDevil

Thanks Barnsley-Bill

@quintus: MP14FB is exactly 22cm high with legs ;)

regards
01-21-2007, 07:38 AM
LittleDevil

Some more pics, V2000 kits, standard units, units with golden froster...etc

http://ld-phasechange.com/images/production_line/17.jpg

http://ld-phasechange.com/images/production_line/15.jpg

http://ld-phasechange.com/images/production_line/16.jpg

http://ld-phasechange.com/images/production_line/18.jpg

regards
01-21-2007, 08:29 AM
Hystrix^

Very nice work littledevil

Regards
01-21-2007, 01:30 PM
Mankz_91

Hey LD...

apparently your making a nice little silver unit for a guy here at school with me... named Chris Butcher...

got any pics or temps for it ?? (might have to borrow it when he gets it..)
01-21-2007, 01:36 PM
LittleDevil

Quote:

Originally Posted by Mankz_91

Hey LD...

apparently your making a nice little silver unit for a guy here at school with me... named Chris Butcher...

got any pics or temps for it ?? (might have to borrow it when he gets it..)

Hey, frosty pics tomorrow and load test :p:

Best Regards
01-21-2007, 03:03 PM
quintus

Quote:

Originally Posted by LittleDevil

Thanks Barnsley-Bill

@quintus: MP14FB is exactly 22cm high with legs ;)

regards

damn a bit too tall but hell...
Thank you!
regards,
q
01-22-2007, 03:42 AM
LittleDevil

Today got new holddowns. Thanks Duniek ;)

http://ld-phasechange.com/images/eva...g/rev2.0/1.jpg

http://ld-phasechange.com/images/eva...g/rev2.0/2.jpg

regards
01-22-2007, 07:30 AM
Nordling

http://gif.vio.ru/03/expect.gif http://gif.vio.ru/03/hi.gif Come to me in ICQ tomorrow in the afternoon, we shall discuss old questions
01-22-2007, 12:41 PM
LittleDevil

Here is first Rotary Single Stage...

http://ld-phasechange.com/images/OcT...d/Rotary/5.jpg

http://ld-phasechange.com/images/OcT...d/Rotary/4.jpg

System is tunned for really high loads 252W @ -46°c room temp 20°c

http://ld-phasechange.com/images/OcT...d/Rotary/6.jpg

Best Regards
01-22-2007, 12:51 PM
Nosfer@tu

OWNAGE LD :D

Very evil performance :p
I like the hold down with the soft eges and the gentel curves :D

BTW how it you bench tables comming along? Can you PM me a price? :D
01-22-2007, 12:53 PM
LittleDevil

Quote:

I like the hold down with the soft eges and the gentel curves

Me too ::p:

Quote:

BTW how it you bench tables comming along? Can you PM me a price?

I will when it will be done.

Regards
01-22-2007, 11:08 PM
Boble76

Very nice LD!! Can't wait... :slobber: :toast:
01-22-2007, 11:43 PM
Harshal

Damn... you just keep doing good stuff!! GoodLuck for Future!
Cant wait to see wat you got next :)
01-23-2007, 02:36 AM
Boble76

I can't get no sleep before I get the "one" fot me! :slobber: :hehe:
That's huge! I thought it's little smaller. :ROTF:
01-23-2007, 02:55 AM
Nordling

Boble76
+1

LittleDevil - Knock when you will be released:
ICQ Number: 293-344-943
Name: Kirill Krasnov
Nickname: Nordling
01-23-2007, 05:44 AM
Dani

Very powerful rotarys, well done :D :fact: :hehe:
Remember those OCTeamFinland stickers on all of those sweet heavy-duty rotarys ;)
01-23-2007, 06:31 AM
Boble76

EDIT: Dani's typo. LOL

Yes, those OCTeamFinland stickers.
01-23-2007, 06:38 AM
Dani

There will be OCTeamFinland stickers, like this:

http://ld-phasechange.com/images/OcT...le_Stage/4.jpg
01-23-2007, 07:09 AM
Moc

Nice!
01-23-2007, 07:26 AM
Drag

Your own brand, thats hawt
01-23-2007, 09:00 AM
Kant

Really nice work, as usual !!
01-23-2007, 10:29 AM
Misko

Quote:

Originally Posted by LittleDevil

Here is first Rotary Single Stage...

LittleDevil how strong are rotary in side it? 12.000BTU? Which gas did u use? Maybe some pics in side :toast:
01-23-2007, 12:42 PM
LittleDevil

Yes i will get stickers this week and i will put them on those sexy units :D

Here is another one :p:

http://ld-phasechange.com/images/OcT...d/Rotary/7.jpg

http://ld-phasechange.com/images/OcT...d/Rotary/8.jpg

http://ld-phasechange.com/images/OcT...d/Rotary/9.jpg

http://ld-phasechange.com/images/OcT.../Rotary/11.jpg

And picture without flash :D

http://ld-phasechange.com/images/OcT.../Rotary/10.jpg

@Misko82: It is about 12.000BTU.

Best regards
01-23-2007, 12:53 PM
Dani

:slobber: :slobber: :slobber:
Very nice LD, those babys are soon ready to transport to Finland :cool:
01-23-2007, 01:06 PM
Boble76

I'm ready too to take that transport right here. :slobber: :D
They are so cute. :p:
01-23-2007, 01:19 PM
Mankz_91

Any news on those temps and frosty pics LD ??
01-23-2007, 01:39 PM
LittleDevil

Hey Mankz_91 here are frosty pics:

http://ld-phasechange.com/images/Chr...#39;_SS/12.jpg

http://ld-phasechange.com/images/Chr...#39;_SS/13.jpg

http://ld-phasechange.com/images/Chr...#39;_SS/16.jpg

http://ld-phasechange.com/images/Chr...#39;_SS/17.jpg

Best Regards
01-24-2007, 02:32 AM
Drag

will these outperform mach2gt?
01-24-2007, 03:32 AM
Nosfer@tu

Quote:

Originally Posted by Drag

will these outperform mach2gt?

Outperforme is not the word ;)

It will leve the GT behinde with 10-20 Degrees, Load idle I would say :)
01-24-2007, 05:54 AM
Duniek

do you use 402 or 410 in rotary SS?
01-24-2007, 05:55 AM
LittleDevil

Quote:

Originally Posted by Duniek

do you use 402 or 410 in rotary SS?

R507 ;)

regards
01-24-2007, 12:36 PM
Mankz_91

wow very nice LD..!!

I'll wait to see his in the flesh, then might give you a shout...
01-28-2007, 12:41 PM
LittleDevil

Some new units ready for shipping...

http://ld-phasechange.com/images/production_line/20.jpg

http://ld-phasechange.com/images/production_line/19.jpg

Regards
01-28-2007, 01:45 PM
before

Very clean job buddy! :)
02-02-2007, 03:49 AM
Boble76

What's the situation of OCTF Rotarys? Ready for shipping soon? :slobber:
02-09-2007, 11:44 AM
LittleDevil

Quote:

Originally Posted by Boble76

What's the situation of OCTF Rotarys? Ready for shipping soon? :slobber:

Yep, shippin really soon, here is one picture to see how big are those units :p:

http://shrani.si/files/picture005szlx.jpg

On the picture looks like bigger than in real :toast:

Best Regards
02-11-2007, 08:28 AM
LittleDevil

Another Single Stage is ready.

http://ld-phasechange.com/images/Tit...2000b/ss/2.jpg

http://ld-phasechange.com/images/Tit...2000b/ss/1.jpg

regards
02-11-2007, 09:24 AM
Brettbeck

Very nice as allways. Are those controllers your own?
02-11-2007, 09:52 AM
Ssilencer

Quote:

Originally Posted by Brettbeck

Very nice as allways. Are those controllers your own?

Looks like one of our XE 2.0 K type controllers.

http://ld-phasechange.com/images/Pederrs's_SS/5.jpg
02-11-2007, 10:23 AM
Brettbeck

Quote:

Originally Posted by Ssilencer

Looks like one of our XE 2.0 K type controllers.

Ahh yeah I can just make out the top line of the display. I only asked because I remember LittleDevil showing some of his own controllers before.
02-16-2007, 03:40 AM
Dani

Quote:

Originally Posted by LittleDevil

Yep, shippin really soon, here is one picture to see how big are those units :p:

Best Regards

How soon :confused:
02-16-2007, 04:03 AM
LittleDevil

I send you email Dani. :)

I will post new pics today (stickers on units....) :rolleyes:

regards
02-16-2007, 04:57 PM
LittleDevil

Dani, here are some pictures for you ;)

http://ld-phasechange.com/images/OcT.../Rotary/12.jpg

http://ld-phasechange.com/images/OcT.../Rotary/13.jpg

regards
02-16-2007, 05:05 PM
Pete

Ales you really a Little Devil....

Anyone seen the film ''The Machinest'' Dude does not ever sleep..i swear Ales is exactly that. Your a phase change unit baby producing machine!!!

Nice dude
02-16-2007, 06:35 PM
4Qman

Quote:

Originally Posted by Pete

Ales you really a Little Devil....

Anyone seen the film ''The Machinest'' Dude does not ever sleep..i swear Ales is exactly that. Your a phase change unit baby producing machine!!!

Nice dude

Agreed,

Little Devil whats the base mesurments of the cascade Cases as id like a idea of the amount of room id have to play with for my build im planning.
02-17-2007, 07:44 AM
Jort

Wow ales :eek:

I remember your first phase change and now look how far you've come:clap: :clap:

Regards:toast:
02-18-2007, 10:14 PM
kayl

nice work there LD,
is there any chance of some pics of the rotary units with out the cases next time ya building them. The Findland team must be doing very well on HWBOT with all these phase change coolers :toast:
02-19-2007, 06:04 AM
LittleDevil

@kayl: There is nothing special on those units ;)

Here is mooded vapo XE ;)

http://shrani.si/files/picture043tsom.jpg

regards
02-19-2007, 07:30 AM
Big SturL

What did you charge the XE with?
02-19-2007, 02:30 PM
Brettbeck

You must have done a fair bit of cleaning on the braze joints :p: ... I can't see any oxidation whatsoever ;) .
02-19-2007, 10:59 PM
kayl

Quote:

Originally Posted by LittleDevil

@kayl: There is nothing special on those units ;)

Here is mooded vapo XE ;)

regards

k thanxs, i didnt expect no special tricks, just curious what insides look like, condenser used etc. from the looks of the case, have ya though of doing dual compressors unit inside and maybe a cpu unit, then on second compressor unit a dual head SLI, im sure one of the findland team members would be interested in such a beast.
still interested in pic when ya get the chance ;)
02-20-2007, 04:26 AM
LittleDevil

@Big SturL: New condensor and new issulation...

Is it yust enough place to put 2x NL11F inside, but i think it's not enough space for dual stage cascade.

http://ld-phasechange.com/images/OcT...d/Rotary/2.jpg

http://ld-phasechange.com/images/SS_cases/rotary/6.jpg

http://ld-phasechange.com/images/SS_cases/rotary/1.jpg

http://ld-phasechange.com/images/SS_cases/rotary/5.jpg

Regards
02-20-2007, 09:36 AM
Big SturL

Hehe, I was wondering what gas you used in the XE, not what you changed :P
02-20-2007, 09:38 AM
LittleDevil

R404a.

Regards
02-20-2007, 09:48 AM
Big SturL

Oh, so the BD50 can handle such a "high-pressure" gas as that?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 06:46 AM.

XtremeSystems