Nice run Kingpin. In your above post, u have ram that can run 270 2-2-2-5. Try running 14*260. That should get u into the 19's club.
Printable View
Nice run Kingpin. In your above post, u have ram that can run 270 2-2-2-5. Try running 14*260. That should get u into the 19's club.
damn KIngpIn....you just keep surprising me with that dothan. great job:)
I figured it wasn't a wr and there would be A jap or viking ahead of me for sure. I can work on that 4min 2sec score though, 3min 45sec is an incredible score by a great oc'r in the stilt.Quote:
Originally Posted by harleybro
I never ran this one on air, right to ln2.Quote:
Originally Posted by macci
Later tonight I'll be storming all the orbs again with the dothan. :P
I may just have to run mark 05 again to see if I can beat the most impressive score on the 05 orb, it was around 9,5** something ;). 885/702 on the card, with the dothan@ 3600+ may do it. I need to test my x850 card to make sure it is still scremaing after I mishandled it last week.
I'm sure you will get the 05 sooner or later :toast:
I wont be updating the score till the end of July when I return from Europe. And I really hope to see you at the top of 05 sir :D
But luckily I have a system thats doing quite a bit better than the old 9591 run clock to clock. 270 5X HTT capable ATI board and some better video-RAM timings + the faster 6542 driver. Maybe some extra FX -speed too :D We'll see how it goes. It will be a good race I'm sure :)
:lol:Quote:
Originally Posted by k|ngp|n
good work :)
Sounds like 10k for sure macci. I definitely have an edge over your top score with the new driver and pentium m.... this is mutually understood of course ;)Quote:
Originally Posted by macci
Maybe I will need to beat it by a few hundred to make it legit.
10k with x850 would be a most incredible overclocking achievement. Will the new ati cards be out before a month? Prolly not.
I already had Dothan running with GeForce 7800 GTX today but after installing Windows I turned the system off and it never posted again. CPU, memory, etc are fine but looks like AOpen i915GMm-HFS just decided stop to work :mad:
Well now I'm running Pentium M 760, Asus CT-479, Asus P4C800-E Deluxe, ATI Radeon X850 XT PE and a pair of Mushkin Black Level II PC3500 256 MB memory.
Wow...that sucks man :( I would have have loved to have seen those results sampsa. I am very interested in how dothan + g70 performs. Should be able to easily own all single card records. I hope to be running that p4gd1 soon with single 7800, but not until the thermal issues are sorted. I'm not spending 600 on a card to run it on air or water :nono:.Quote:
Originally Posted by Sampsa
Looking forward to your dothan results...have fun and good luck guys :toast:
Have you found them in the US yet?Quote:
I hope to be running that p4gd1 soon
I waited like 3 months this board to arrive and now it's dead in 45 minutes without overclocking :cool:Quote:
Originally Posted by k|ngp|n
Well, I'll try to get Asus P4GD1 and of course new Aopen i915 board.
Struggled with condensation my whole bench session :(
97f today with bad humidity.
I did manage to grab #1 on the orb "officially", as OPP's arent posted. Damn it feels good to see my name on top :) This was my second run of the night, with a good car low that score is at 45.3k easy. That and my card clocks were only 830/688 for nature. I will try again tommorrow. 200fps ch could be done in a final score by penitum m.
http://pic8.picturetrail.com/VOL256/.../102373351.jpg
compare url:
http://service.futuremark.com/compare?2k1=8630026
Also ripped off a am3 at 120k...LOL,
look at the x850 with the 7800 guys and ahead of all the 6800 ultra's :).... next closest ati card is nowhere in sight.
http://pic8.picturetrail.com/VOL256/.../102373345.jpg
I'll say one thing thats a fact, it is a million times harder to bench 3d with an agp card/pci-x card, than benching pi w/pci card. I loose stability on the top end, when I put the agp card in for 3d. About 50mhz or so.
Grats Vince!! :toast:
Will be nice if/when you can squeeze an even 45k with Dothan+ATi :) But great job on taking #1 official 2001SE :woot:
Btw, YHPM ;)
:lsfight:Quote:
Originally Posted by twilius_basic
The dothan has fullfilled it's destiny, and made it to the top(officially ;).
Of course it feels good to be on top :D You've done a hell of a lot of work for that, you deserve it. Congrats!
Sampsa, that really sucks... I get impatient after about 3 days, 3 months would kill me :lol: Have you told them their crappy board stopped working in under an hour and you need a new one yet?
well, intel is #1 with a single card now :)
Good job Kinpin. I really want to see 45k with ATI&Dothan. Work like right by the AC or something. Hopefully tomorrow u will get 45k on the orb.
my consideration goes to your 2weeks+ hard benching !
im glad you finally made it. :toast:
You kill me man :P... I hope tommorrow.Quote:
Originally Posted by moddolicous
Just realized I got wr for lh,ch, dh, and cl (even though it sucked) all in one run. Dothan doesn't play.
Excellent Kingpin :toast:
Is that the right driver? 4.12's own '01, not sure on Intel tho.
THANX G...Quote:
Originally Posted by G H Z
I know the 4.12's own for 01', andI have been trying to force the 4.12's on the x850agp, and they won't install properly. The farthest I have gotten is they will install, but on reboot it reverts back to standard vga driver. For now I am stuck with the 5.1's which blow for 01', but they are better than the later drivers. Nature is bad with dothan for some reason too. Even with x800xtpe and 4.12's/3.4cp, nature isnt where it was with fx.
wtg, vince...
that's one HELL of an accomplishment!!!I mean you've been benching with LN2 like 5 times a week now for 2 or 3 weeks....
:woot:
C
Incredible work! You made it after all, tremendous effort.
:cheer: :clap:
Congratulations on the top spot, bro. :rocker:
You didn't use a bottle of CO2 to ward off the condensation? At least you didn't kill any hardware. :) As for forcing 4.12s on the X850 AGP, I didn't have any luck either. When I was testing drivers out, the 5.2s averaged 200 more points over the 5.1s during straight runs. But that's on an AMD system, so maybe 5.1s are better on Intel.
Cheers! :toast:
Congratulations on your #1 spot. Glad to see you made it.
Gratz kingpin!
Outstanding job Kingpin! Ive been following this thread since the beginning and it looks like you`ve been working hard for this one :) well deserved, congrats :toast:
finally someone besides oppainter who can be n°1 in 3dm01 :clap:
now give us the 45k and were all happy :woot:
ps: how long was oppainter on the number 1 spot anyway ?
Good job! LN2 rules :toast:
Good payback for all the hard work :toast:
Excellent benching, you deserve a rest when you finally stop !
Regards
Andy
45K on Dothan would be quite Xtreme..
The Pentium-M screams for SLI-support :)
Congrats Kingpin :toast: 1500+ from OPP single card record is frkn impressive. I thout he would be on #1 spot forever :D . 7800's are unnoficial on orb so that makes you top dog now. You made the last remark in last gen hardware :slapass: , good work man :clap:
Here is my "Dothan collection" :cool:
http://www.muropaketti.com/artikkeli...than_setup.jpg
How much slower is the 915 chipset to the 875, or is there not much in it ?
Regards
Andy
Sampsa.....
That is a sexy looking pile of hardware you got there! :)
A little mouse ;) told me that the orbs now recognize the g70's, so my official reighn will be very short lived. Still going for mid 45's later today, just to do it.
What the pentium m really needs now is an asus p4gd1 socket 478/pci-x board so I can run the g-70 with it. I think am3, mark 03 ,and 05 single card scores will be sick with that kit. Not so sure about 01'.
Any fellow euro overclockers willing to help me out? Pm me if you can please.
that is very very impressive
if only all dothans came with such great o/cing abilities
:rolleyes:
Most dothan's overclock very well IMO. 80% overclock on ln2 is possible if you've got the nerve and skillz. Thats sick :).Quote:
Originally Posted by Jayw28
3700mhz/19sec soon pi 1m stable.....now entering jap pent M territory:
This pi run was on win2k and not OS' tweaked really. I installed win2k3 server after, and with some minor tuning, my sp1m time dropped .35 sec at stock clocks, compared to win2k....should be able to bust past 20sec now on ln2.
http://pic8.picturetrail.com/VOL256/.../102467767.jpg
Should have some updated 3d later with an x800xtpe... been mid 90's and 80-90% humidity all damn week. Even with ac on, still warm in the house.
wow just insane! almost 45k and your gonna try for a better run and take out 45k once and for all! I know your 3k behind oppainter but your using a $400 x850xt vs. *two* 7800gtx costing well over $1000 combined! His single 7800gtx barely got over 40k if I remembered. Just wait till people start trying out crossfire and especially with *two* r520s :eek:
i just hope that dothan and yonah get some much needed support. if we could get them on an sli chipset they would be right back on top of the orb in all 3d benchmarks.
i have been very impressed with my $200 chip thusfar, and could recommend it to anyone. at 2.4ghz, its neck and neck with any production chip on the market. you could almost say that the oc on these chips dont start till after 2.4 :fact: , as i havent seen any of the 533fsb chips not make that.
at 2.4ghz and 1066fsb with my gen gpu, there isnt anything touching me at or below that clockspeed, aside from other dothans.... :clap: :clap: :clap:
kingpin - tried extracting the drivers then putting some files from 4.12 in place of newer versions?
Kingpin what ram are you using now and what voltage? does not look like your pc3200. I'm asking cause i want to go dothan and those are nice timings.
Impressive 20's in PI. Hope to see 19 soon :woot:
Yeah Stevil, I messed around with replacing files in the inf's of both drivers, but no sucess. I guess it no longer matters because I'll be running the x800xtpe now with the 4.12's. I just hope this card can clock far, if it can't....x850 will still be better option. Here she is all modded up and ready to go with 4.12's installed.Quote:
Originally Posted by STEvil
http://pic8.picturetrail.com/VOL256/.../102636067.jpg
Just need some more ln2 as I used up most of what i had trying to hit 3.7ghz yesterday. So damn close to 3700mhz now....These chips clock better the more I freeze and bench them I swear. Also, these aren't my most optimal timings on the ram, but still my best 1m time so far and still on win2k:
http://pic8.picturetrail.com/VOL256/.../102678739.jpg
Funny thing is, 3681-3694 gives around 20.2 sec every time, so when I hit 3700 or slightly above, it should give me a nice jump to 20.0 or lower I hope. Thats the way it's gone anyways.
Railer.....These are my buffalo single sided pc3200/2700(spd timings). THey are without a doubt the best set of 256x2 bh-5 I have ever used. Got them on ebay for 80 bucks.
What are u using on the bottom of the LN2 container for thermal paste? I heard a mix of AS5 and AS ceramique was the best. BTW, cant wait til u hit 19's. How does Kaz-n hit 19's @ pretty much the same clocks as u? Can your ram run 285 2-2-2-5?? Try 13*285, that will get u around 3700 (3705) and will hopefully get u into 19's.
Kingpin, are you using Chilly1's container or Jason's? Which do you like more? (looks like Reggie's unit in pic)
Also when you were clocking the X850, did you do VDDQ or just VDD? I assume you did OVP since you had such good vgpu. I'm thinkin when I mod mine, I will do what OPP mentioned and just put a blob of solder over r1596 to bring it to ground and remove OVP completely. Is that how you did OVP?
Btw GL with that X800XTPE, I really wanna see how she clocks with LN2 :)
Your putting on a great show Mr. Pin. :toast: Keep it up.. :clap:
Crazy :D good work.
What was max. mhz on air for superpi?
Just regular silicone. I have alot of ceramique here, and I havent touched any of it after using it once. The cheapo white silicone stuff is the best for these temps IMO. My contact is so good that, the imprint almost has 0 silicone left in it.Quote:
Originally Posted by moddolicous
The Japs are just that good at tweaking pi. Every step of the way, I have been behind them in score clock for clock. I have no idea what tweaks those guys are using, but they sure are good. They are also using win2k3 server, which if tweaked properly, can yield lower times. Pi is like a religion to these guys, and I dont think for a second that I can beat them at their own game :P, I can only try though. On the flip side of that coin, I dont expect KAZ-n to be flying by me on any of the orbs anytime soon ;), though I'm sure not impossible. Right now I am a little more focused on 3d and getting the best clocks possible out of hardware for 3d.
What I need to do to increase my pi score effeciency, is spend some good quality time with win2k3 server.
For x850 I did vgpu, vdd, and ovp only. Ovp was done the right way for x850.Quote:
Originally Posted by twilius_basic
I crunched off the resistor with a pair of needle nose pliers, and put solder in between...just like you said.
I am still using chillys containers on the cpu and gpu, however Jasons container was able to go colder due to more mass at the bottom. Evap temps were -190 to -191c with his and with chillys I can only get about -184.4 c loaded max. It has never gone lower, however I never put as much of a load on jasons as I am on chilly's either (dothans barely put out any heat at all, so it's prolly irrelevant.. It was hard to test dothan with J's container due to mounting/insulating issues, so I'm using chillys. It doesn't mean that chillys is better performing though, just easier to use for dothan. I was never able to run the two head to head. Both have pros and cons I'm sure. I still believe our solid ones will be best.
They will be unbelievable. Machined out of a solid copper 3x9 block, and very simliar to what the japs are using now. I expect evap temps will be the best with those and get me better clocks on the chip. At 3650mhz and up, if I loose track and evap temps drop to -182c, the chip locks up. Isn't that crazy? I'm betting those solid containers will get me some more mhz on this 770. I would like to see -192 to -193c evap temps Should have them soon.
I didnt do much with this chip on air. My 760 did around 2.8ghz, this one probably 2.9ish.Quote:
Originally Posted by sharp
I personally cant wait to see 45k fall in your hands :D
Thanks for the reply King :)
I figured the containers would both have good/bad sides. Jason's prolly little bit better temps, but harder to insulate than Reggie's. The Chilly1 design is very easy for setup :yepp:
Definately will be interested to see exactly how much better this super expensive uber-container will be :D
I gotta say I am dyin to get mine. :slobber: Really lookin to what you do w/ LN2 and it. BTW ygpm. ;)Quote:
They will be unbelievable. Machined out of a solid copper 3x9 block, and very simliar to what the japs are using now. I expect evap temps will be the best with those and get me better clocks on the chip. At 3650mhz and up, if I loose track and evap temps drop to -182c, the chip locks up. Isn't that crazy? I'm betting those solid containers will get me some more mhz on this 770. I would like to see -192 to -193c evap temps Should have them soon.
No updates at all.....problems with mobo/vreg = no benches.
I'm about to throw in the towel for this setup , sick of wasting my time and nitro on it.
Thanx to a friend overseas however :toast: , I will be able to try the p4gd1/g-70 combo next week with the solid container. Hoping it's as fun as this kit was.
Looking forward to that p4gd1 combo, let's see if you can get that mobo running ok, pci-e lock problems suck. Good luck m8.
het kingpin why don't you going to use the chilly1 container?
you want something else from the container?
tnx:)
I do/did use my chilly container for all of this pentium m benching so far, and it's worked great, but I think there is more.
Here is what I am wondering Jort:
Will way more mass on container help with sustaining LOADED temps longer??
Will way more mass on the container help give me lower LOADED temps(closer to the temps of the ln2 itself)?????
Will way more mass allow me to bench more efficiently with ln2(use less)???
These are some questions I need answers to, and should have soon.
SOrry to hear about the problems. With the new mobo comin you should destroy all single card scores. :) Lookin forward to what you find on your mass questions. ;)
i Thing charlie allready tried it:)
if your base is at good thickness But your container has more mass, it should lead your temps the better way prolly.Quote:
Originally Posted by charlie
the most important is to get the heat away as fast as possible.
this is best with the maximum working/toughing area of base with dice
maybe if chilly can try to make a double length block and try in with load?
maybe he did allready or someone?
just my view on it:)
By total mass I believe he's not talking about base thickness but overall mass of copper. In other words a tube machined out of a piece of solid copper (no brazing all one piece) ;)
k i see now, i think its not the biggest factor.
to tranfer the heat from the cpu to the total container will take longer.
the best way is to increase the effectivity between the heattranfer from cpu to dice.
and this is by increasing the inner design.
i could be wrong:)
sorry to hear as well. However your near 45k wont be forgotten and we hope to have you benching again soon, perhaps this time with a much better fx57 ;)
Do you mean regular bathtub silicone or something?Quote:
Originally Posted by k|ngp|n
Good luck with the new board.
NO! Not silicone caulk/adhesive/glue!!!!Quote:
Originally Posted by G H Z
He means regular old white paste thermal grease that comes for FREE every time you buy a new heatsink or something!! I've got packs of it from Vantec and from Arctic cooling...
http://www.xtremesystems.org/forums/...chmentid=33609
C
exactly what I mean. The base is still at optimal thickness(1/2inch), but the sides are much thicker all the way to the top. 1/4 inch I believe. Total weight on the container is around 4-5lbs.Quote:
Originally Posted by harleybro
I'm not predicting anything here really. It could be that the extra mass makes little or no difference at all, I need to test it with ln2 in actual benchmarking situation to see for myself. We can talk about it forever. Something as simple as being able to hold temps longer during 1 benchmark, would be of benefit to me. Using ln2 by yourself on cpu and gpu is not an easy thing. Chilly's containers are nice, but they need to be kept full of a specific ammount of nitrogen at all times. Temps rise fast and cause lock-ups if your not on top of it.
Just like charlie said G :) The cheapo free stuff.Quote:
Originally Posted by G H Z
Quote:
Originally Posted by Geforce4ti4200
As soon as the cold bug isn't that big of an issue with these chips, I'm all over it ....things are looking pretty promising as of late with the italians, sham, and opp hitting nice speeds at colder temps. Thanx for your words geforce. If anyone can appreciate an 01' score, it's you :) I wish I could keep going with this setup, but my last best p4c just doesn't want to play nice anymore.
So will you be getting another? Or travelling the FX-57 route.
Congrats k|ngp|n :)
great result :)
I'm not bailing on pentium m just yet. I have a few p4gd1's coming from the uk to run with the 7800gtx and dothan. I think this will do nicely in single card mark 03,05, and especially am3.Quote:
Originally Posted by twilius_basic
Sorry to hear about the P4C800, but on the same token, the P4GD1 sounds very exciting. :toast:
I didnt think the p4gd1's clocked as well as other boards though. Best of luck anyway pal should be some good scores :)
My p4gd1 is arriving tomorrow K|ngp|n, hope you lit the way, cause later this month its going under DI thanks to a "made by Jort" container. Kudos to him for that.
BTW anyone can tell me how good could show up my Dothan 730 SL86G made in malaysia, pack date 18th feb 2005, batch Q506A283.
My boards haven't arrived yet..prolly monday....I wonder if they will be the only ones in america ...this board isn't anywhere here.
Kamerat has gotten really nice results from the p4gd1. Can't remember if he used a g70 though. You should talk to him. High fsb is possible on this board with the right tweaking....but for mark 03 and 05 and a single 7800, the cpu bottleneck isn't really there, so bus speed won't matter as much. 01 is a different story. I would rather have a x850 or x800 for that though.
Kamerat used X800XT. The girl from online store told me mine was the ninth they had shipped today so plenty of them available and at good price.
Quote:
Originally Posted by Always
Where in the U.S are these available???? Please post a link if you can.
Sorry, I live in Spain. I already pm'ed you when you were asking for someone to send you p4gd1 mobos. Hope all of them arrive ok at your doorstep and you can bench as soon as possible.
My bad I forgot.....I got a ton of PM's from alot of nice folks all over the world :)Quote:
Originally Posted by Always
Don't worry, I got my board this morning, too bad adaptor doesn't arrive till monday or tuesday. Gonna go for a big pata HDD and a new PSU this afternoon. Hope yo can continue benching with dothan and pci-e and change the thread header adding 03 and 05 scores.
Good luck with that. If you can only get it stable 3.5G+ with that board. I think it does not lock AGP/PCI so it's going to be a chalenge. Mayby by the time you set it all up new bios will comeout with a fix.Quote:
I'm not bailing on pentium m just yet. I have a few p4gd1's coming from the uk to run with the 7800gtx and dothan. I think this will do nicely in single card mark 03,05, and especially am3.
Hope you're right 'bout new bios fixing pci locks. Kamert had no problem going far with the board, it just needs more juice to chipset. Bios gives 1,6v max, with vmod and 2.0v through the 915P you are ok.Quote:
Originally Posted by railer
Very nice to se someone still benches with 1 card .. Nice work :up:
It`s sad to se the 01`orb messed up by SLI scores :upset:
LOL....thank you so much Andy :clap: Can't believe they got delivered on sunday.The cheerios are becoming a staple around here :)
I'm betting these are the only p4g's in the U.S atm.......lots to do now.
http://pic8.picturetrail.com/VOL256/.../103948805.jpg
Awesome can't wait to see your results. :slobber: Did your cereal box have gcards in it also? If so gonna have to start goin for cheerios. :) What company delivered on a Sunday? :confused:
Kingpin, looking good and good luck to your tests! :toast:
good luck mobos k|ngp|n
Best of luck to you my friend! And it's great that Andy came through!! :toast:
Quote:
Originally Posted by Fosco
SLI is only "messing" up 2003 and 2005, the gpu bound benchmarks. Cpu makes very little difference in 2003 and especially 2005. In 2001 kingpin's single x850xt is in 2nd place, only Oppainter's SLI is ahead and only because of the crazy 700 nature or something :slobber: Nvidia just sucks in 2001 once ati's x900xt crossfired comes we will see real damage and I cant wait to see 60k plus scores in 2001 :slobber: This is funny I will be way less than half of that at 23.8k with my 9700!
That´s why i´m waiting for the crossfire to play , and spent real money on hardware .Quote:
Originally Posted by Geforce4ti4200
I really want to see the 60k barrier faling down .
Opp or k|ngp|n should take care of that .
k|ngp|n , i wish that the hardware goods be with you ,
lets see >47k is a decent result for me :)
Good luck my friend
After 2-3 hrs of working with it, I finally got it runnin right.
So far looking very good on p4gd1. Got some bh-5 stable at 270 for pi w/3.6vdimm. Cpu used maxed at 2754 with ct-479 cooler:
http://pic8.picturetrail.com/VOL256/.../104059298.jpg
http://pic8.picturetrail.com/VOL256/.../104059305.jpg
Pi scores kinda suck, but I expected that compared to p4c800. Especially with winxp and no os tweaks or others except 5-2-2-2 on the ram. It's a shame there isn't a 915 tweaker. Just going for max bus clocks here in 1:1 with my hyper-x here, dont really care too much aboiut the scores.This board is going to tear up 03,05, and especially am3 with the 7800 I bet :)
:thumbsup:
Now I just have to get me one of them p4gd1 too!!
Does it boot with 6x multi like P4c?? Same BIOS options? Voltage options in BIOS? Did you do the Vchip mod?
C
Glad they arrived, the cerial boxes were the only thing I could think of for padding that did not add too extra weight because we pay through the teeth here for shipping ( like everything else as well ) .
Shame the 915 is not as fast as 875 chipset, but it's still going to be excellent for r520 and to some extent 7800GTX I think for 2001.
Good luck.
Regards
Andy
Wow this gets realy intresting now. I hope you will be able to go way higher on xtreme cooling. Can't wait to see your results on this board. Hope you can get at least 3.3G cpu 3d bench stable ;) or i'm asking for to much to fast heheQuote:
After 2-3 hrs of working with it, I finally got it runnin right.
So far looking very good on p4gd1. Got some bh-5 stable at 270 for pi w/3.6vdimm. Cpu used maxed at 2754 with ct-479 cooler
Very nice kingpin! :toast: Just running air ATM?
I think from systool you can tweak 915Quote:
Originally Posted by k|ngp|n
Cant wait for your results. Like others, I would like to see the 50k barrier broke pretty soon.
yes we need results :)
These are really nice charlie. Very easy to setup. It boots with locked multiplier of whatever chip your using. I am not sure yet if booting below 200fsb has an effect on performance as it did on the p4c800, but thats what I have to do atm on air because I was testing with a 760m(15x). I boot at around 170fsb from bios synced with ram(340), and the overclock in windows using clockgen. Once I freeze it, booting from 200+ in bios won't be a problem at all I'm sure.Quote:
Originally Posted by charlie
There are a ton of bios options on this thing that arent on the p4c/p4p's. Also, there are plenty of vcore option with the 1006 beta bios. Havent tried the other 1005 bios as I flashed it right out of the box.
I don't believe the vchip mod is necessary for fsb lower the 270, but for above 277 I think it is(this could be board dependant, but I'm not 100% sure yet. I was able to hit 270 1:1 with only 1.6v chipset and an active hsf on the chipet cooler. The most important thing is the pci-e frequencey has to be set properly to achieve high fsb. Auto setting will get you guys nowhere.
Great job again andy ... We'll see for 01', but for dx9 3d benches it will do the job just fine. 03' and o5' with single card isn't all too cpu/system/timngs dependant. I still think the x850 will beat the 7800 in mark 01, but we'll see. R520 will rock on this board for sure.Quote:
Originally Posted by zakelwe
Of course I will :). I want to see some 3d action with a 780 at 3.7ghz+ on this thing, don't you? All this testing was done on air with the ct-479 cooler. Just making sure there was a way around the pci-e frequency locks, before anything further.Quote:
Originally Posted by railer
Good info, I'll check it out.Quote:
Originally Posted by Unseen
Great news K|ngp|n, I'll give it a go this afternoon as soon as I get my new PSU. Keep that news coming.
Hehe 3.7. Sure i want to see 3.7 The think is that i have not seen anyone @ even 3.2 with this board yet. Best of luck to you figuring out PCIe settings. That will be a major factor. Do you have 2x7800 ready :p: ?Quote:
Of course I will . I want to see some 3d action with a 780 at 3.7ghz+ on this thing, don't you? All this testing was done on air with the ct-479 cooler. Just making sure there was a way around the pci-e frequency locks, before anything further