They were made in 2003, but I bought them used a couple months ago and before that they had never been fed more than 2.7V so they're still getting used to voltage.Quote:
Originally Posted by mursaat
BTW, I got off a 32M run at 276Mhz 3.61V:
http://img.photobucket.com/albums/v6...H-5/27632M.jpg
Very nice sticks, HiJon89. :up:
Thanks, my goal is 32M at 280Mhz :woot:Quote:
Originally Posted by sierra_bound
Same for me :)Quote:
Originally Posted by HiJon89
With my 2x512Mb OCZ, I'm ok at 279.2 but I would like to be the first reaching 280 2225 32m screens ;)
I also have 290MHz 2225 at 32m with my 2x256Mo kit :)
Some very fast UTT: :toast:
2x512MB TeamGroup PC4000 BH-5/UTT @ 3,7v
http://desertshooter.nl/32M273SP.png
Did some more oc'n on my NC 3200+:woot: on water with room temp of 18°c.
Its now running at 11x240 doing R@H,will try more;).
Just want to know, can I use my Geil One BH5 2x512MB for daily work ?
I have setting for HTT255 2-2-2-5 1T 3.57v prime95 blend test for 5 hours and counting.
DDR 550 4X512MB 2-2-2-5-2T 32M
MB: DFI SLI-DR Venus
CPU: Opteron 146 0601 GPAW
Ram: Mushkin DDR500 BH5 UTT+DDR 500 CH5 ES
DDR 550 4X512MB 2-2-2-5 32M
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/1.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/2.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/3.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/4.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/5.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/6.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/7.JPG
http://pic.digital-info.net/Andre/Venus-4Dimm/BH5/8.JPG
Finish
http://pic.digital-info.net/Andre/Ve...s4Dimm-BH5.JPG
http://http://valid.x86-secret.com/show_oc.php?id=72797
*** Thread updated and some unneccessary posts removed :D ***
Don't let that machine slow down, people! Keep it alive :up:
This is my result.
2x512MB ROX V-Data PC3200 UTT 1.5-2-2-0 1T @ 3.72v
http://www.vmodtech.com/spaw/images/...-271-pi32m.jpg
http://www.vmodtech.com/modules.php?...pid=141&page=4
boblemagnifique - 308x9=2772MHz DDR616 @ 5-2-2-1.5-1T - DFI Ultra-D (NF4 Ultra) - A64 FX55 - Adata PC3200 (cooling caskade - first test)
http://www.membres.lycos.fr/boblemag...ual/308mhz.JPG
Jmax_oc - 290.6x9 = 2615MHz DDR581 @ 0-2-2-1.5-1T - DFI Ultra-D (NF4 Ultra) - A64 Winnie 0448SPAW - KHX3500 + mush PC3500 lvl2 (Air cooling)
Aircooling avec 0448 SPAW
32M boucle 13
32M boucle 13
32M boucle 14
32M finished N°1
32M finished N°2
http://img92.imageshack.us/img92/40/...ravaill0hh.jpg
WOW!!! Good job. :toast:Quote:
Originally Posted by boblemagnifique
Thank :toast:Quote:
Originally Posted by Moonman
boblemagnifique - 311x9=2799MHz DDR622 @ 5-2-2-1.5-1T - DFI Ultra-D (NF4 Ultra) - Opteron 146 - 2*256 Adata PC3200 (cooling caskade)
http://www.membres.lycos.fr/boblemag...ual/311mhz.JPG
Really sweet :)
2 x 512MB Socket 939
funkflix - 297x10=2970MHz DDR540 @ 5-2-2-2.0-1T - DFI Ultra-D (NF4 Ultra) - A64 Opteron 146 - Corsair PC3500C2 Rev. 1.1
http://img226.imageshack.us/img226/2...4mhz36v7og.jpg
http://img226.imageshack.us/img226/2...digicam1hm.jpg
Finally reached 280MHz 1M! This sticks rock! :D
http://img64.imageshack.us/img64/330...7vsmall3lf.jpg
@ funkflix
:clap:
please test a little bit more and you can do 285(570) , ;)
Some new results from recent testing :
2x512Mb Mushkin LII Black PC3200 @ 265MHz 3.6v (bios) :
http://img236.imageshack.us/img236/1...at3pt6v4xo.jpg
4x512Mb Mush LII PC3200 + OCZ VX4000 @ 260MHz 3.5v :
http://img162.imageshack.us/img162/4...123pt5v2og.jpg
Also have 2x512+2x256 Mush LII @ 260 running at the moment.. will update soon :)
I'm quite sure you can do better with your mush lvl 2 ;)
^^ Yeah, I know :( Not enough hours in the days lately :(
This is my setup with the 170 :
260x10 with 2x512+2x256 Mush LII
My Gskill GH 2x512 at 3,6V DDR537:
*** Updated *** :toast:
Burned them in a bit more, i managed DDR540 SPi32M stable:
DFI Venus
Opteron 175 CCBWE 0530
2x512 Mushkin Lvl II BH-5
2x512 TeamGroup UTT
Vdimm 3.75v (DMM)
http://img179.imageshack.us/img179/3...998auto3qd.png
@Dave: Thanks
Always with my Old OCZ VX 3200
http://img205.imageshack.us/img205/1345/pi32m2713uv.jpg
@Zeus
please show me the A64 Settings !
Regards
SPLMANN
Here you go:Quote:
Originally Posted by splmann
(For >260MHz i have to use DRAM response time set to "fast" instead of "fastest" in bios which result in Max Async Latency 9 instead of 8.)
This is my new result.
2x512MB ROX V-Data PC3200 UTT 2-2-2-5 1T @ 3.72v
http://www.vmodtech.com/spaw/images/Venom-8/272-32m.jpg
My Winbond UTT
2x512MB Corsair XMS3200 v6.1 (0516011-0) DDR495 : 1.5-2-2-0 1T @ 3.5v
System : DFI NF4-D @ SLI MOD || A64 Venus
http://www.postmafia.com/p/13062006/dZuGzC4cx8.jpg
For information to compare your results :
AIRCOOLING : Kit 2x512Mb (OCZ PC3500 Plat LE)
http://img498.imageshack.us/img498/2...latence5dn.jpg
http://img498.imageshack.us/img498/1...lecture5ep.jpg
http://img498.imageshack.us/img498/7834/oczspi7fs.jpg
http://img498.imageshack.us/img498/6...synchro6uz.jpg[/quote]
DOD : Kit 2x256Mb (KHX3500 + Mush 3500 lvl II)
http://img142.imageshack.us/img142/5104/maxspibh0rn.jpg
Certification CPU-Z
http://img513.imageshack.us/img513/7...ory28814cx.png
wow 320 2-2-2-5
extraordinary results
One french mate did 324MHz with cascade cooling
Team Xtreem PC4000 2x512Mb DDR500 BH-5 UTT
2-2-2-0 DDR500 3.48V
http://img161.imageshack.us/img161/4...500348v9qz.jpg
2-2-2-5 DDR530 3.68V
http://img196.imageshack.us/img196/4...530368v1bk.jpg
265 @ 2-2-2-5, 3.68v in bios on ultra-d, 2x512 mushkin bh5
http://img239.imageshack.us/img239/3266/2651jx.jpg
I was going to say I think this thing needs to updated after seeing jmax's other thread.
DFI nF4 Ultra-D
A64 3700+ (san diego)
2x512Mb Mushkin RL XP4000 (UTT CH5) 272MHz @ 3.6V / 2-2-2-5-7-256
http://koti.mbnet.fi/boble76/Tietoko...1x272SP32M.jpg
*doubles* sorry!
DFI Expert 704-2BT
2x512Mb Geil Value UTT :) 254 @ 3.33v in bios
3700+ E6 Toledo
There is still some left in the tank for this ram. Max is about 265 with 3.6v, doesn't scale nicely with high volts tho.
<img src="http://www.z.asghar.dsl.pipex.com/32M.jpg"></img>
All on air :D 92mm panaflo on ram
hey&tosunermc
2*256mb kingston hyperx khx3500
1.5-2-2-0-7-0-1t@3.6v
dfi lanparty nf3 250gb,5v vdimm moded
sempron 2600(8x max multiplier:(.. )
http://img132.imageshack.us/img132/4...1527000qt5.jpg
oh yes, its november 2006, but i like that list and im gonna try to join that list. got me an expert/FX and wanna get loving from my 4 sticks. plus hey, its something to do this winter!Quote:
Originally Posted by bachus_anonym
GO GO GADGET THREAD REVIVAL!
getting a nf4 ultra d next week so i figured i post some of my old winbond stuff.
modded DFI nf3 250GB to allow upto 4V without messing with psu
http://i256.photobucket.com/albums/h...ownage/270.jpg
http://i256.photobucket.com/albums/h...e/DSCN0123.jpg
Holly thread resurrection mate! lol
:DQuote:
Originally Posted by shaolin95
i will fill it with more usefull SS later, that nf3 is dead now from NB overvolt.
/quoteQuote:
Originally Posted by shaolin95
Wow!!
Remember Mushkin!?
Look at those timings! 2-2-2-5.... I still have my BH-5 sitting around here somewhere... :) Good ole days if you ask me!
Yeah I still cry when I see my DDR3 timings....gotta love those old Bh5 things with their super voltages.! Heck I still have an OCZ DDR Booster lol
Ill never forget running 10x265 2-2-2-5 on my NF2 Barton setup... whole rig cost as much as a cpu these days... $35 for the 2600M+ (Unlocked!!!); $89 for the dfi mobo; Some Corsair BH-6 rated @ 133 mhz I bought two years earlier for hardly anything...
Heh my barton rig was awesome too, loved it to bits. Had a 2600+ M and some Mushkins/Team sticks. So reliable even with silly voltage 24/7 aircooled.
But running DDR3-1600 MHz 6-6-6-X is 'tighter' than DDR-500 2-2-2-X.......still, miss those days. These days I have to overclock my my wallet to keep up with current prices........
Yeah mate and the good thing is that despite the very high voltages they never die!Quote:
Originally Posted by shaolin95
I still have around 4GB of BH-5 RAM at home, all still have stickers of voltage and speeds they could do. I really miss those days :( :( :(
4 x 256 Corsair ; only PC 2700 are BH chips, silver kit is 433MHz [ TCCD ? ]. Never push this with more than 3.1v, this mem is for 478 setup.
http://img42.imageshack.us/img42/2131/pict0379d.jpg
But I love my ddr3 ; 3 x 2GB Goodram Pro 2000 C7 with Elpida Hyper :D