WELL.......NOW guess what THIS does....Warning 56K / photos...

Printable View

Show 100 post(s) from this thread on one page

09-25-2004, 02:05 PM
LowRun

Quote:

Originally Posted by hipro5

Thanks...........I said blue LED DISPLAYS not blue LEDS....... ;)

:doh:

My bad, stupid me.
09-25-2004, 08:20 PM
iceman2g

Quote:

Originally Posted by WesM63

So whos goingt to be the first person to try the "4.22v" setting? ;)

Good work hipro, keep us updated. I have a spot all warm and ready for it.

4.22v would probably just not boot. ;) Depending on your memory 4v is do able. Max i've done was 4.1v. These were with BH-5 on a Infinity.
09-25-2004, 08:33 PM
Cranox

Thx 4 the update Hipro5 :up: ( u maybe can make a limited edition with the bleu leds ;) )
09-26-2004, 03:03 AM
hipro5

Quote:

Originally Posted by Cranox

Thx 4 the update Hipro5 :up: ( u maybe can make a limited edition with the bleu leds ;) )

;) You are in my mind Cranox........ :D

It will be a limited edition with blue led displays and blue-red leds(coz green with blue just doesn't fit together)........ ;)
09-28-2004, 12:45 AM
Spec3

Quote:

Originally Posted by WesM63

So whos goingt to be the first person to try the "4.22v" setting? ;)

Good work hipro, keep us updated. I have a spot all warm and ready for it.

I've run 4.3V into some ram......it's still semi-alive now :banana:
09-28-2004, 02:32 AM
hipro5

I've also fed my Rams with 5+ Volts BUT by mistake......When I used to work with the EPOX mobo 4PCA3+ which feeds the Rams via the 5Volts line , an output Mos-Fet was burned - shortcirquit - and the 5Volts line(5.55V accualy) fed my Rams for about a minute or two till I figure out why I had all those errors on Memtest-86 I was runing that time at even below 200MHz...... :D

They are still alive though..... :D ;)
09-28-2004, 04:32 AM
situman

still waiting for the word on where to order one :)
09-28-2004, 05:18 AM
Unoid

Howdy hipro

Great work hipro, Any idea if this will work fine on the dfi infinity nforce 2?
09-28-2004, 07:42 AM
hipro5

We will see about the compatibilities with different mobos..... ;)

In case that someone wants to feed 4 x 256MB or 4 x 512MB Ram modules , there is ALSO a way to do so with soldering on the motherboard 3 (three) cables........ ;)
09-28-2004, 09:43 AM
Gamer

Quote:

Originally Posted by Jack

about 110 us dollars :)

$ 121 to be exact.
09-28-2004, 10:16 AM
situman

does this mean it should be retailing soon?
09-28-2004, 12:17 PM
cetoole

Are there more pictures coming soon?
10-02-2004, 04:17 AM
situman

gosh im so anxious
10-02-2004, 06:55 AM
LDK

Looks really interesting
Might get one when you have final price :D

Again, great job hipro :toast:
10-03-2004, 10:21 AM
rhino56

why did it seem like the switches were upside down to the led readout?
it is one of the coolest inventions ive seen yet out there.
great work, and even greater work on keeping the wife.
10-03-2004, 02:34 PM
The Mofo

Waiting for ordering information :toast:
10-03-2004, 07:47 PM
kraggy

wow! I leave for few months and come back to find out that Hipro is an evil scientist!!!!!

Daa--aang bro! I want one.......NOW! :p:
10-03-2004, 09:57 PM
hipro5

Thanks guys......... :D :toast:
10-03-2004, 09:59 PM
hipro5

[QUOTE=rhino56]why did it seem like the switches were upside down to the led readout?
it is one of the coolest inventions ive seen yet out there.
great workQUOTE]

Switches will not been seen with the front face of the panel so there is no problem about it...... ;)

Quote:

Originally Posted by rhino56

and even greater work on keeping the wife.

:D Yes indeed..... :)
10-03-2004, 10:00 PM
hipro5

Quote:

Originally Posted by kraggy

wow! I leave for few months and come back to find out that Hipro is an evil scientist!!!!!

Daa--aang bro! I want one.......NOW! :p:

:D :toast:
10-04-2004, 09:58 AM
BALDY

Quote:

Originally Posted by kraggy

wow! I leave for few months and come back to find out that Hipro is an evil scientist!!!!!

Daa--aang bro! I want one.......NOW! :p:

More like a MAD scientist :D

But thats a good thing!!! :toast:
10-04-2004, 10:15 AM
Riemen

No, he's evil, cause he kills little poor cute Ram-Chips :D

Great job. Reserve one of your blue display special edition for me.
10-04-2004, 12:24 PM
kraggy

Quote:

Originally Posted by Riemen

No, he's evil, cause he kills little poor cute Ram-Chips :D

Great job. Reserve one of your blue display special edition for me.

I would like a blue led one too Hipro buddy! Remeber me from OCforums? Krag?? I used to be a Intel freak but now that I have a FX-53 I aM A amdROID!!
10-05-2004, 02:36 AM
hipro5

Quote:

Originally Posted by kraggy

I would like a blue led one too Hipro buddy! Remeber me from OCforums? Krag?? I used to be a Intel freak but now that I have a FX-53 I aM A amdROID!!

:D Hey krag.........What's up my friend?.......Everythings OK?......... :toast:
10-05-2004, 02:37 AM
hipro5

BLUE Led Displays finaly have been ordered....... ;)
10-05-2004, 05:57 AM
kraggy

Quote:

Originally Posted by hipro5

:D Hey krag.........What's up my friend?.......Everythings OK?......... :toast:

Indeed M8! This FX-53 gives me some "INSANE" memory badwidth on air!!!! I can't imagine wht it would do with your little toy!!!!!! I am thinkin' really hard about getting soem Gskill pc4800!! wOOOOt! :banana4:
10-05-2004, 06:28 AM
situman

I guess the device will retail soon?
10-05-2004, 06:56 AM
Arnar

do you have some homepage where you can order this from.. or will we have to just PM you here
10-05-2004, 09:06 PM
hipro5

Quote:

Originally Posted by Arnar

do you have some homepage where you can order this from.. or will we have to just PM you here

There are two online stores here in Greece where you will be able to order them from and there will be one in Austria , one in Australia ,one in USA and one in Canada - for the time been - where you will also be able to order it online....... ;)
10-05-2004, 09:09 PM
Detract

Do you have an ETA yet?
10-05-2004, 09:26 PM
Stang_Man

hipro, sweet work!!

wondering if you got any other pics of the unit??
10-06-2004, 03:27 AM
Vryada

Quote:

Originally Posted by hipro5

P.S. Computers suck our lifes........ :D

rofl! so fu***ing true!!!!

that just rocks man. congratulations!!!
10-06-2004, 07:47 AM
reject

Quote:

Originally Posted by hipro5

There are two online stores here in Greece where you will be able to order them from and there will be one in Austria , one in Australia ,one in USA and one in Canada - for the time been - where you will also be able to order it online....... ;)

Australia nice!!!!!! is it pccasegear.com?
10-06-2004, 08:29 AM
BALDY

Quote:

Originally Posted by hipro5

one in USA ;)

Can't wait :usa:
10-06-2004, 04:15 PM
Susquehannock

:toast: :up:
10-06-2004, 06:06 PM
quick

i'm ready to get buy one :banana: :banana:
10-07-2004, 12:55 PM
blander

Quote:

Originally Posted by hipro5

There are two online stores here in Greece where you will be able to order them from and there will be one in Austria , one in Australia ,one in USA and one in Canada - for the time been - where you will also be able to order it online....... ;)

i will also order in switzerland :D
10-07-2004, 03:20 PM
Pefen

:banana: Wonderfull stuff :banana:

I will definitly order one :D
10-07-2004, 03:29 PM
masterpain

you got me, i want one of these maximizers.
great work. :banana:

Quote:

Originally Posted by hipro5

and there will be one in Austria ;)

which shop is it?
10-10-2004, 10:13 AM
Stang_Man

hipro, your pm is full.
10-10-2004, 07:01 PM
texuspete00

Quote:

Originally Posted by Stang_Man

hipro, your pm is full.

Lol... thats funny... because the limit here is like 500 or so. :p:

Looks like hipro might sell a few of these :D
10-10-2004, 11:23 PM
hipro5

Hi there guys..... :)

Yes PM's inbox is full....I'll clean it up ..... :D

I would like to thank you for your support ....... :toast:

As for the online shops , I'll tell you as soon as I'm ready......I'll give you links of them......Another two have been added...... ;) :)

This week we will have some UPDATE...... ;) :)
10-11-2004, 10:03 AM
BALDY

hipro5, I think your wish came true. Look here But wouldn't that kind of power be an overkill. :confused:
10-11-2004, 03:29 PM
PnoT

I've been holding off on the OCZ unit for a while now hopefully this week we can get some shops to order from :) I'm sure they'll be sold out in the first few hours hehe.
10-13-2004, 02:38 PM
froudeg

Very nice indeed hipro.

An idea for a future feature would be remote sensing - with long leads running from the unit to vdimm etc, there is going to be some drop across the lines under heavy loads....some remote sense wires for output tracking will sort that out.

One other thing, from my own experience of making small runs of custom pcb's - with the sheer number of hand only solderable components, which robotic assembly machines cannot cope with - productions costs are going to be rather high...unless you plan to hand solder them all yourself, which will take hours per unit.

Robotic assembly nowadays consist of pick and place machines, which mainly handle SMT components only - anything that isn't SMT or bulky, tends to be hand soldered at the end of the production line - if most/all the design is non SMT, costs will be high.

Altho you have probably looked into this side of things anyway.
10-13-2004, 02:53 PM
hipro5

Quote:

Originally Posted by froudeg

Very nice indeed hipro.

An idea for a future feature would be remote sensing - with long leads running from the unit to vdimm etc, there is going to be some drop across the lines under heavy loads....some remote sense wires for output tracking will sort that out.

One other thing, from my own experience of making small runs of custom pcb's - with the sheer number of hand only solderable components, which robotic assembly machines cannot cope with - productions costs are going to be rather high...unless you plan to hand solder them all yourself, which will take hours per unit.

Robotic assembly nowadays consist of pick and place machines, which mainly handle SMT components only - anything that isn't SMT or bulky, tends to be hand soldered at the end of the production line - if most/all the design is non SMT, costs will be high.

Altho you have probably looked into this side of things anyway.

Thanks for your thoughts......... ;)

Don't worry about assembling coz here in Hellas we have lot's of macines which can assemble either SMD components or "normal" ones....The cost it's about the same.....These are all organized don't worry........

As you propably not read well - or you just missed it - I wrote that the drop from zero Ampers to about 25 Ampers loads was 10mV and after that - with some improvements - it is now - I wrote it down too a long time ago - about 1.5 to 2.5mV.......Everything is taken good care of......... ;)
10-13-2004, 03:11 PM
froudeg

Is that drop measured at the source, or after about a foot of wire, at the load?
10-13-2004, 03:36 PM
hipro5

Quote:

Originally Posted by froudeg

Is that drop measured at the source, or after about a foot of wire, at the load?

All measures where been taken on the pins of the DDR modules........ ;)
10-20-2004, 11:36 AM
Cornelious0_0

I'm honestly not a huge poster around here, as I use XS as more of a resource then anything else...but I still and to stop in and give you a pat on the back hipro. :toast:

I live in Canada and I would be honor'd to be one of the first Canucks to own one of your beauties. Once you are able to disclose the name(s) of any canadian resellers you're working with I'd greatly appreciate knowing how it's gonna work out for pricing up here.

If someone could point me towards a VERY clear pic and/or guide for doing the OVP cut/mod on my Lanparty Pro 875B revB I woudl be very greatfull......hipro.....think I could do BETA testing with my Lanparty 875B?
10-21-2004, 10:02 AM
TEDY

what's the price ?
10-21-2004, 04:37 PM
Arnar

This is alittle off topic, but Im just curious,

Do you make your livin' out of this? (making overclocking devices), or do you work at some engeneer office doing something that doesnt involve overclocking.
And are you an electrian engeneer?

Just admire your skills ;)

And will this device be better than the OCZ booster, then if it is, how then?

Thanks
10-21-2004, 10:05 PM
Goli

I can´t belive this Hipro!!! this is i call Xtreme!!!!

And to latin America any seller? i want one!! blue leds, red leds, i don´t care i think my memories will be in red color when i put 4V jejejeje.

Very nice job! hipro!!
10-26-2004, 07:51 AM
situman

Update? Btw does the device require a -5v line to function like the OCZ booster?
10-28-2004, 05:46 AM
Blind_GI

Any updates on this (was there a new thread on it?)?
10-29-2004, 05:50 AM
jb2cool

i want one of these soooo bad. I keep checking for updates from time to time.

Maybe Hipro5 is going to senn his design to OCZ like Cathar sold his WhiteWater design to D-Tek
10-29-2004, 07:13 AM
notoriousformula

Sweet!! Would you be adding fan/s to finished product? Can't wait.. :slobber:
10-30-2004, 01:50 AM
hipro5

Quote:

Originally Posted by situman

Update? Btw does the device require a -5v line to function like the OCZ booster?

No.......It has NO issues with different PSUs out there......It doesn't matter what PSU we have coz it "takes" it's power from +12V and +5V lines........ ;)
10-30-2004, 01:51 AM
hipro5

Quote:

Originally Posted by jb2cool

i want one of these soooo bad. I keep checking for updates from time to time.

Maybe Hipro5 is going to senn his design to OCZ like Cathar sold his WhiteWater design to D-Tek

No.........I'm going to manufacture it........ ;) :D
10-30-2004, 01:52 AM
hipro5

Quote:

Originally Posted by notoriousformula

Sweet!! Would you be adding fan/s to finished product? Can't wait.. :slobber:

No.......NO need for fans........It runs Cooooollllll........... ;) :)
10-30-2004, 02:19 AM
hipro5

U P D A T E

MOTHERBOARD'S COMPATIBILITY LIST

DDR(1) based Motherboard's :

ABIT IC7 Series (IC7 - IC7-G - IC7-Max3) VTT OK - no need for mods.....
ASUS P4C800 series VTT no need - tracked on motherboard it shelf....
ASUS P4P series ......SAME as above......
EPOX EP-8RDA3+ VTT OK - no need for mods....
EPOX EP-8RDA6+PRO VTT OK - no need for mods....
EPOX EP-8RDA3I VTT OK - no need for mods....
MSI 939 Neo2 - VTT no need - tracked on motherboard it shelf....
ABIT AS8 series - VTT no need - tracked on motherboard it self....
ABIT AI7- VTT no need - tracked on motherboard it self....
DFI NF4 (series) SLI-D - VTT no need - tracked on motherboard it self....

On the below list of the ABIT AN8 series motherboards, you HAVE to pick the 2.8Vdimm through bios....... ;)
ABIT AN8 - VTT no need - tracked on motherboard it self......
ABIT AN8-SLI - VTT no need - tracked on motherboard it self......
ABIT AN8-V - VTT no need - tracked on motherboard it self......
ABIT AN8-3rd Eye - VTT no need - tracked on motherboard it self......
ABIT AN8-Fatal1ty - VTT no need - tracked on motherboard it self......
ABIT AN8-Fatal1ty SLI - VTT no need - tracked on motherboard it self......

DDR2 based Motherboard's :

ASUS P5WD2 Premium - NOT Compatible

That's for now...........Further updates in a few days..........

Sorry for my delays but I have a LOT other work to do..........

LATEST UPDATE was on 11/23/2005
10-30-2004, 04:32 AM
notoriousformula

Quote:

Originally Posted by hipro5

No.......It has NO issues with different PSUs out there......It doesn't matter what PSU we have coz it "takes" it's power from +12V and +5V lines........ ;)

Nice!!! :D
10-30-2004, 07:27 AM
cetoole

Can't wait to test it on my AN7 to see if vtt is an issue, as there are no known mods. Great work cant wait to see more.
10-30-2004, 08:25 AM
TEDY

what about DFI NFII ?
10-30-2004, 10:42 AM
Playful_Buffalo

wow....i dont post much around here, but...NICE JOB :D
10-30-2004, 11:39 PM
potkit

any news?
10-31-2004, 01:31 PM
SwimmerBoy

Friend hipro5.... I'm waiting for that :D

Gold ends?!? wow.... YOU'RE THE MAN...YOU RULLE!!! :D

[[]] Keep the good work
11-01-2004, 10:13 AM
Unoid

hipro put a rush on your product I want a item to review for geekextreme! my bh-5 is begging for 3.6V ;-)
11-02-2004, 12:40 PM
Breathless

Hipro, It may be a very good idea for you to have these things out a few weeks before Christmas.... pull in some extra revenue for yourself ; )
11-02-2004, 03:51 PM
TheJackal

Hipro you got anyone for selling in the UK yet, if not grab me on msn
11-02-2004, 04:07 PM
LANjack

I want one, lol. Let us know who the US reseller is when you know.
11-03-2004, 09:17 PM
THunDA

Wow.. thats some amazing work there.. :D
11-05-2004, 09:56 AM
SwimmerBoy

Any news from around here?!!?
11-05-2004, 02:31 PM
Tim

I think you just got your first order from The Netherlands (ME!) :D

Quote:

Can't wait to test it on my AN7 to see if vtt is an issue, as there are no known mods. Great work cant wait to see more.

Yeah me too, definitely
11-06-2004, 02:10 AM
Jack

Quote:

Originally Posted by Tim

I think you just got your first order from The Netherlands (ME!) :D

i don't think so :D
i want one aswell :toast:
11-06-2004, 01:59 PM
Tim

Hehehe, houwdoe, lol is this thread dead or are the preparations moving along?
11-06-2004, 02:09 PM
cetoole

I think he is still working on getting the 5 layer pcbs for the dimm slots manufactured, but I am as anxious as anyone for news.
11-07-2004, 04:07 AM
hipro5

We are on the "final stage".........Now we are waiting for the manufacturing company for the PCB's to be ready and compleated.......... ;)
11-07-2004, 04:31 AM
Dissolved

Great to hear :D
11-07-2004, 04:46 AM
spresv

wow dude...... I mean..... wow......

What's the price again?
11-07-2004, 05:31 AM
Jack

Quote:

Originally Posted by hipro5

We are on the "final stage".........Now we are waiting for the manufacturing company for the PCB's to be ready and compleated.......... ;)

Great! :D :toast:
But how many Maximisers will you have ready then?

Quote:

Originally Posted by spresv

wow dude...... I mean..... wow......

What's the price again?

i thought it was like 100-120 bucks
11-08-2004, 03:08 PM
Ub3r-L33ch

Must...have...make...RAM...faster!
11-08-2004, 04:12 PM
rick_fx

Nice! :)
11-09-2004, 04:47 PM
zabomb4163

what kind of manufacturing capacity will you have
11-10-2004, 09:28 AM
hipro5

Firstly will be made about 300 units..........33 of them (32 - one will be mine) will be with blue led displays and the rest of them as is........Afterwords we will see...... ;) :)
11-10-2004, 09:36 AM
notoriousformula

Quote:

Originally Posted by hipro5

Firstly will be made about 300 units..........33 of them (32 - one will be mine) will be with blue led displays and the rest of them as is........Afterwords we will see...... ;) :)

Sweet! When can we expect these in Canada or States? :toast:
11-10-2004, 01:31 PM
cetoole

300 units, hope I get one of them, are the PCBs ready for us to see?
11-10-2004, 04:46 PM
tdamocles

looks very interesting......

Hook me up!
11-10-2004, 05:51 PM
quintus

Originally Posted by hipro5
Firstly will be made about 300 units..........33 of them (32 - one will be mine) will be with blue led displays and the rest of them as is........Afterwords we will see......

some for the big guys here ;) others in a contest here, so we can have all some chances, and the rest....

How much cost 1? in case i dont win :D i can pick it up myself, i wanna see Hellas!
11-10-2004, 10:20 PM
=[PULSAR]=

Thats some nice hardware your making hipro5. Are we going to see user friendly controls from outside the case. Sort of like a fan controller?
11-11-2004, 01:04 AM
bxa121

i wonder how this rates compared to commercial versions of the same thing.....
11-11-2004, 01:06 AM
Dissolved

Quote:

Originally Posted by bxa121

i wonder how this rates compared to commercial versions of the same thing.....

commerical verisons?

there arent any.

the OCZ boster is the closest device, and there nothing alike (as hip would say ;))
11-11-2004, 02:01 AM
confuzzedintel

New here and i must say that is one SWEET device you have made there cant wait to see it on the shelfs great job.
11-11-2004, 09:50 AM
zabomb4163

Quote:

Originally Posted by quintus

Originally Posted by hipro5
Firstly will be made about 300 units..........33 of them (32 - one will be mine) will be with blue led displays and the rest of them as is........Afterwords we will see......

some for the big guys here ;) others in a contest here, so we can have all some chances, and the rest....

How much cost 1? in case i dont win :D i can pick it up myself, i wanna see Hellas!

why would he give somthing that cost a consideral amount of money away when he has more customers than capacity?
11-12-2004, 06:50 AM
Bennah

No doubt the first 300 would be sold in a flash.

Then we would see alot of dead mem sticks on here :D
11-14-2004, 01:55 PM
[XC] serlv

HiPro5, I think I will be wanting one, too. Any news on progress?

Does one unit handle two sticks? Or...
11-19-2004, 06:52 AM
Cranox

Any updates HiPro5 ?
( me need one ;) )
11-19-2004, 01:54 PM
BALDY

:D ^ ^ what he said ^ ^ :D
11-19-2004, 02:11 PM
cetoole

Hipro5, good thing you aren't in the US, violation of my eighth amendment rights, what have I done to deserve this cruel and unusual punishment? At least post more pictures for me to :slobber: on.
11-20-2004, 11:45 AM
burnhead

A-W-E-S-O-M-E!!!!!!!!!!!!!!!!!!!!!! just A-W-E-S-O-M-E!!!!!!!!!!!!!
11-21-2004, 06:56 AM
hipro5

Quote:

Originally Posted by serlv

HiPro5, I think I will be wanting one, too. Any news on progress?

Does one unit handle two sticks? Or...

When you say two sticks what exactly do you mean?...... :)

If you mean 2 x 512 MB of caurse and it easily can........... ;)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 06:20 AM.

XtremeSystems