kewl man, thanks.Quote:
Originally posted by Cactus Jack
47K variable.
u too S.A.E:toast:
Printable View
kewl man, thanks.Quote:
Originally posted by Cactus Jack
47K variable.
u too S.A.E:toast:
thanks to you guys :)
SAE and other peeps can u verify this check this out is aida buggy ?
http://www.bleedinedge.com/forum/memleaderboard.php
Check the bandwidth of the first place :)
Score seems bugged... at least for this low fsb... hmm. I will see. I am also registered there, but I gave up when I saw, there's no option to submit my scores... (no internet on my benching rig, also none in future). But I'll try the bench anyway.Quote:
Originally posted by JeffPH
SAE and other peeps can u verify this check this out is aida buggy ?
http://www.bleedinedge.com/forum/memleaderboard.php
Check the bandwidth of the first place :)
yeah, that's a little buggy
sometimes the proggy don't update your rig when you submit a new score...... so it can be that you have 4200mb with 230fsb or somethim like that. and it's so easy to "cheat"
on topic: i found out that the Northbrigde don't like high temps. i couldn't find something about this. i put some ice in my water and can go 5mhz higher with the same voltage.
For most of us (all I know with a LP B here or Infinity) it did not gain us anything supercooling the nb... :confused:Quote:
Originally posted by centaur
yeah, that's a little buggy
sometimes the proggy don't update your rig when you submit a new score...... so it can be that you have 4200mb with 230fsb or somethim like that. and it's so easy to "cheat"
on topic: i found out that the Northbrigde don't like high temps. i couldn't find something about this. i put some ice in my water and can go 5mhz higher with the same voltage.
At least no gain in fsb. I could drop the vdd a bit, but that's all. :shrug:
P.S. Do you run with CPC on, max timings and APIC on???
SAE i am still using the stock bios that came with the board :) guess am lucky at 257 1:1 :) does my bios have CPC ? APIC is on while i benched :)
You have a TW board, I assume... :DQuote:
Originally posted by JeffPH
SAE i am still using the stock bios that came with the board :) guess am lucky at 257 1:1 :) does my bios have CPC ? APIC is on while i benched :)
CPC is enabled by default in the shipping bios iirc...
SAE it is a Taiwan board hehehehehe :) got it from singapore 2 months ago hehehe :) should i cahnge bios? will this increase any performance?
Yeah. Could increase performance... try the 6-19 :DQuote:
Originally posted by JeffPH
SAE it is a Taiwan board hehehehehe :) got it from singapore 2 months ago hehehe :) should i cahnge bios? will this increase any performance?
There are the extra timings (7), the AGP latency setting, less boot probs... set AGP latency to 128+ to get better 3d stability/performance. With the additional timings you'd have to experiment... lowest possible for me are 0-0-3-3-0-0-3. But it's not that stable over 250 fsb with cpc/apic on.
thanks a lot SAE hehehe will report back soon :) alt-f2 works with this bios?
Should work with all bioses with .bin ending together with the awdflash 8.2x... (use newest possible) :)
SAE : mind linking to getting the latest AWD i cant seem to find it in any site thanks
Here... Award Flash BIOS Utility Ver. 8.24G:
http://www.jetway.com.tw/evisn/downl...s/Awdflash.exe
Thanks a lot SAE :)
cpc is on, timings maxed out, and apic is off. i can't find any differences between apic=on/off on my sys. "on" is maybe a little bit slower in the mem-performance but a can't go higher with the fsbQuote:
Originally posted by SAE
For most of us (all I know with a LP B here or Infinity) it did not gain us anything supercooling the nb... :confused:
At least no gain in fsb. I could drop the vdd a bit, but that's all. :shrug:
P.S. Do you run with CPC on, max timings and APIC on???
then i cooled down my water with some ice and get 5MHz more. i'm wondering myself
APIC OFF is much worse in 3d performance in my experience... I just compared 3dmark and Far Cry though...Quote:
Originally posted by centaur
cpc is on, timings maxed out, and apic is off. i can't find any differences between apic=on/off on my sys. "on" is maybe a little bit slower in the mem-performance but a can't go higher with the fsb
then i cooled down my water with some ice and get 5MHz more. i'm wondering myself
where is that in the bios SAE? and after I set that to 128+ is there anything else u recommend I set to possibly more stability? wut do u have ur DRAM ratio at, and agp frequency (66,67,68,etc)?Quote:
Originally posted by SAE
set AGP latency to 128+ to get better 3d stability/performance.
edit: nvm I found it. set it to 128 and testing it now. wonder why its set so low default (like 24 or sumthing)?
Dram ratio China board 1:1, TW board Auto (both best options each).Quote:
Originally posted by FlyingHamster
where is that in the bios SAE? and after I set that to 128+ is there anything else u recommend I set to possibly more stability? wut do u have ur DRAM ratio at, and agp frequency (66,67,68,etc)?
edit: nvm I found it. set it to 128 and testing it now. wonder why its set so low default (like 24 or sumthing)?
AGP at 75MHz, 80MHz works too. AGP lat at 255, sometimes testing 128 to 255...
Those boards are so ... argh... I cannot recommend anything else for stablility as each board I had liked different settings... arrrr... I hate it ;)
thnx. wut does changing my agp latency to 255 do? it seems so much out of proportion compared to the default 24. could I possibly harm any hardware?
and does 75Mhz help with your overclock or increase performance, or both?
75-80MHz is faster, more stable and just better for me ;)Quote:
Originally posted by FlyingHamster
thnx. wut does changing my agp latency to 255 do? it seems so much out of proportion compared to the default 24. could I possibly harm any hardware?
and does 75Mhz help with your overclock or increase performance, or both?
The default value for AGP contoller latency is 32. It sets the time the AGP controller can own the bus... other devices have to wait. Could be bad for raid controllers/wavetable soundcards. But no harm, just sound errors or worse performance. But you'd notice it. When I was running raid0 I did not have problems...
i want to do the vcore mod with this potentiometer. (attached image)
does it make a difference which legs i use on it?
also, having it set to the middle position shouldn't raise my voltages should it?
Dont use one turn pots for mods.
use 10-15 turn pots... DIGIKEY.COM is the place to find them.
Think about where you want the knob vs the pins too, based on where you will be mounting the pot..... pick the best orientation from the choices they have.
Yeah, with these 1-turn buggers you can easily fry something with shaky hands :lol:
I did the vcore mod pin 7 to ground: I can only reach around 2V benchmark stable (measured at the back of the toroid). Do I need the OVP mod (pin10 to ground) for more? Other suggestions?
And at what resistance does the vdimm begin to increase? I begun at 200K and slowly dropped to 40K. There was no increase in vdimm. Or could it be my mod isn't properly attached?
About Vcore mod:Quote:
Originally posted by HaLDoL
I did the vcore mod pin 7 to ground: I can only reach around 2V benchmark stable (measured at the back of the toroid). Do I need the OVP mod (pin10 to ground) for more? Other suggestions?
And at what resistance does the vdimm begin to increase? I begun at 200K and slowly dropped to 40K. There was no increase in vdimm. Or could it be my mod isn't properly attached?
Vsense does nothing yet... noone was able to figure out how DFI got it to work and how to get around. But maybe the vdrop and the OCP mods would gain you something. Then you also could try to set the vcore to 1.825V in bios, then upping the voltage to 2.06V or so using the pot (pin7).
About the Vdimm:
It seems to be not connected. I get 3.55V at around 100K. Maybe you attached the wire to the wrong side of the resistor? (should be left side of the resistor looking from the IDE connectors)
OK thanks a bunch :thumbsup: You probably saved me from killing my board
:D
Thank god, not me :lol: ;)
I'll really thank God because my vdimm mod was ok but I was measuring on the wrong mosfet. I measuring my 3.3V line (mosfet at the end of the agp).
God knows how many volts I've feeded my RAM. But all is ok now and I can reach 266FSB. Not what I expected but I still have many biosses and bios settings (especially RAM settings) to try out.
whats the one located above the cmos battery then? it never moves from 3.36v?Quote:
Originally posted by HaLDoL
I'll really thank God because my vdimm mod was ok but I was measuring on the wrong mosfet. I measuring my 3.3V line (mosfet at the end of the agp).
God knows how many volts I've feeded my RAM. But all is ok now and I can reach 266FSB. Not what I expected but I still have many biosses and bios settings (especially RAM settings) to try out.
LOLQuote:
Originally posted by HaLDoL
I'll really thank God because my vdimm mod was ok but I was measuring on the wrong mosfet. I measuring my 3.3V line (mosfet at the end of the agp).
God knows how many volts I've feeded my RAM. But all is ok now and I can reach 266FSB. Not what I expected but I still have many biosses and bios settings (especially RAM settings) to try out.
I can bench up to 268 relatively stable... but everything above that is crappy
Too much vdimm seems to worsen things.
The right mosfet is the left one of the three located below the ram slots. you have to measure the back of it (the plate thingy) pointing north when looking at the board in case :)
Yeah, DFI always have a day form too, you'll probably notice. ;)
And the timings are very time consuming to test...
Maybe that's supplying some 3.3V devices located in this area (maybe the SATA, and some other chips, realtek maybe)Quote:
Originally posted by Naasar
whats the one located above the cmos battery then? it never moves from 3.36v?
did modding ur tc 550 bring up ur 3.3v line on ur infinity or lp?Quote:
Originally posted by SAE
Maybe that's supplying some 3.3V devices located in this area (maybe the SATA, and some other chips, realtek maybe)
and is the mod pretty easy?
I modded each line, so the rails go up when I want them to ;)Quote:
Originally posted by Naasar
did modding ur tc 550 bring up ur 3.3v line on ur infinity or lp?
and is the mod pretty easy?
It's quite easy, but not for unexperienced people.
Link's here: http://www.xtremesystems.org/forums/...threadid=31931
You have to experiment with the rails what's best for ya.
Best of luck, SAE :cool:
SAE,
are u cooling your vcore mosfets at all? i am not currently, but the side case fans blow right over them....i dont have them set too high coz of noise of course. if u do, did it help stablize ur voltages at all? dammit i want my toaster sig before its too late...lol
Yeah, I cool all mosfets as good as possible. Gained me stability :)Quote:
Originally posted by Naasar
SAE,
are u cooling your vcore mosfets at all? i am not currently, but the side case fans blow right over them....i dont have them set too high coz of noise of course. if u do, did it help stablize ur voltages at all? dammit i want my toaster sig before its too late...lol
That's my current board...
SAE, let me know when u wanna sell that board. ;)
i 2nd that Mr.Hamster.....heheQuote:
Originally posted by FlyingHamster
SAE, let me know when u wanna sell that board. ;)
:lol:
As soon I can afford an A64 S939 ;)
/edit.
In case I don't kill it till then :D
Can You show Us screen with prime and Mbm min/max (every 1s probe) with this 2,15V ??Quote:
Originally posted by Cactus Jack
I managed to get 2.15v stable with a vmod on my Infinity without a vsense mod, but do not take that as Gospel as any hardened DFI abuser will tell you that everysingle board has a personality of its own. I'm not fobbing you off, but you would be best off finding out for yourself what is best for your board and I'm sure others will agree with me.
p.s. I didn't measure the resistance of my vmod at 2.15v as that would have required de-soldering the mod.
Sae, the black wire is the vdroop right? Thats pin 10 to the back of the coil? No pots involved? Still haven't seen any good pics of the mod.
:lol:Quote:
Originally posted by yotomeczek
Can You show Us screen with prime and Mbm min/max (every 1s probe) with this 2,15V ??
Don't you think you want a lil too much?? ;)
He already sold his hardware cause he has to concentrate on business primarily from now on :D
Yeah, right. I used a fixed 4.75k resistor. It's right where the hotglue is, soldered to pin7. The hotglue holds the resistor and wire to the board.Quote:
Originally posted by HaLDoL
Sae, the black wire is the vdroop right? Thats pin 10 to the back of the coil? No pots involved? Still haven't seen any good pics of the mod.
hehe I don't think so ...Quote:
Originally posted by SAE
:lol:
Don't you think you want a lil too much?? ;)
He already sold his hardware cause he has to concentrate on business primarily from now on :D
It may by screen with prime and some kind of monitoring software :D
He should have one ...
SAE is giving new meaning to the term 'burn in':DQuote:
Originally posted by SAE
:lol:
As soon I can afford an A64 S939 ;)
/edit.
In case I don't kill it till then :D
Hehe. Don't be this mean ;)Quote:
Originally posted by mad mikee
SAE is giving new meaning to the term 'burn in':D
You can comment on my next dead board when it has ... just died :D
So:
vcore mod: pin7 - 50k var - ground
vsense mod: pin 10 - 50k var - ground
vdroop mod: pin7 - 4.75k fixed - back of toroid coil
ocp mod: replace resistors with higher value fixed ones
and only the vcore and vdroop are usefull. Correct me if I'm wrong.
You got it right... with the mods. But vdroop is pin7 to anything variable as well, so you could test for better results with other values... :) (I used 4.75k fixed)Quote:
Originally posted by HaLDoL
So:
vcore mod: pin7 - 50k var - ground
vsense mod: pin 10 - 50k var - ground
vdroop mod: pin7 - 4.75k fixed - back of toroid coil
ocp mod: replace resistors with higher value fixed ones
and only the vcore and vdroop are usefull. Correct me if I'm wrong.
And about the second statement of yours:
No, only the vsense is NOT nescessary, the other mods gain you something.
I'm sorry I cannot as like SAE said, I've sold that hardware off now as I do not have the time to mess around overclocking like I used to. Is there anything I can help you with, or were you trying to make a point about something?Quote:
Originally posted by yotomeczek
Can You show Us screen with prime and Mbm min/max (every 1s probe) with this 2,15V ??
P.s the only monitoring software I ever used was the Bios, the Winbond monitor, Sandra and my multimeter.
He wanted a proof ;)Quote:
Originally posted by Cactus Jack
I'm sorry I cannot as like SAE said, I've sold that hardware off now as I do not have the time to mess around overclocking like I used to. Is there anything I can help you with, or were you trying to make a point about something?
P.s the only monitoring software I ever used was the Bios, the Winbond monitor, Sandra and my multimeter.
No trust here... :D
I cannot understand why on earth he would think I was BS-ing about something as trivial as CPU voltage. :rolleyes:Quote:
Originally posted by SAE
He wanted a proof ;)
No trust here... :D
Strange problem with LP B here...
It won't boot with Duron Morgan core 1,3Ghz...with 1/31 BIOS...
I've tried almost everything....remove J8...clearing CMOS...took off all peripheral and put it back on again
Before that I'm using Barton mobile 2400+ OC 203x12@1,65v....i forgot to change BIOS setting...so when I change it with Duron Morgan...it won't post anything, it won't even sounds anything too?...
Now I can't use my CPU cause I'm waiting for my new Mobile and all I got is this Duron
FYI...The Duron worked fine on my other mobo
Whats up here?...or maybe LP B doesn't support Duron morgan core???
Wow. Duron should be supported... 1/31 bios??
`
Hmm. No chance to flash 1-21, 6-19 or even the offical 11-27???
If the bios is really not able to detect there's a duron inserted, then you won't be able to use it :(
Last chance would be a hotflash to either of the bioses named above...
Yes...so I guess I won't be able to use my rig for a while until I get my new Barton :( ...
All of the four led indicator is on anyway...but it don't even post to BIOS..
I still think its kinda strange...I guess none of the LP B user use their system with low proc like Duron...so its kinda forgotten on BIOS update...
I'll give u an update until I get my new Barton...if its worked...then it must be the mobo that doesn't compatible with Duron...
On my previous mobo EPOX 8RDA+ this Duron is worked fine...and I switch my Barton and Duron without a hitch...I still choose for the EPOX if it only could do high FSB without modding.......
or maybe someone got somethin I should try again?
Did you do any socket mod's? Remember, stuff like Vcore default (war) mods are diff for diff CPU's. Could be the "code" hit an undefined on Morgan?
Nope...no mod at all...my board still "pure" :D...
Before I try to change with Duron I use Barton mobile with 203x11@1,65v...and I put it off and put the Duron on...I forgot to set the BIOS to default first....I didn't have a change to use the Barton again since it already gone....
Here is my PiFast33 result with locked Duron 1600 and DFI Lanparty Ultra B, water@25ºC :(
http://muljas2.mine.nu/dani/Tietokon...20PiFast33.gif
Then it must be my board...
I try it for the second time..it still won't work it won't post to BIOS...
could it be because my OCing BIOS setting with my Barton?
but I already cleared with the jumper...
@ Lastviking:
"vcore drop+vcore overcurrent modds will be added soon."
erm.....where are them ? :)
the rest is very nice done :) good job
Anyone know why i cant run whit an higher vcore then 1.7v ?
If i set the vcore over 1.7v the computer wont even boot.
I have flashed the bios whit the 1/21 but still no different.
The mosfets are not getting hot, only ~40 degrees Celcius.
If anyone have a clue what it can be, plz shout, cus it not so fun being stuck whit a vcore at 1.7v :(
Do you have another cpu to try... tbred or such?
Test it... either it's the board or CPU.
I only got an extra Duron at the moment, But i doesnt feel so happy about unmounting my vapochill to try out, but maby i have to do it anyways..Quote:
Originally posted by SAE
Do you have another cpu to try... tbred or such?
Test it... either it's the board or CPU.
Ohh, I doesnt know if it mathers but the cpu can do 2.4ghz at standard vcore totaly stable.
The 06/19 Beta bios fixxed it :D
Running as we speak 1.85vcore, havent tryed higher yet but will do that as soon as possible.
Thx SAE
/wez
Gr8 :DQuote:
Originally posted by wez
The 06/19 Beta bios fixxed it :D
Running as we speak 1.85vcore, havent tryed higher yet but will do that as soon as possible.
Thx SAE
/wez
i've a problem.
best bios is 1/21 i've tested a lot of them but every bios same problem.
i have an amd xp-m 2500+ and the LP B
mushkin level 2 BH-5 pc3500 ram 1x512mb stick (ds)
my problem is i can start my pc @ 200 fsb no problems
@ about 220-250 fsb my pc startes and the windows loading screen appears the sound of my HDD is gone the bar goes 3-5 times over and then the pc stop 2 work.
@ ~255-260 the same but the HDD works fine and windows startes normal work and gaming possible
@ 261 fsb also same :banana: :banana: :banana: :banana: as problem part #1
sniff sniff, its a sad day. doom3 killed my board, i have one on the way for tomorrow delivery and i am gonna return this one....
wow...
i hope the next infinity wont have that dam whistle coming from the mosfets
HOW the hell Doom3 could kill your board??? Was the Infinity THIS jumpy ??? :D :lol:Quote:
Originally posted by Naasar
sniff sniff, its a sad day. doom3 killed my board, i have one on the way for tomorrow delivery and i am gonna return this one....
wow...
i hope the next infinity wont have that dam whistle coming from the mosfets
Or was it YOU being nervous about that game, that you kicked your rig accidentally? ;)
lol, nay it wasnt doom3. god knows what it was but i was playin for like 4 hours, then it rebooted, and rebooted again during reboot, and again. next thing u know, the led at the bottom of the board lights up but thats it. no boot no nothing....Quote:
Originally posted by SAE
HOW the hell Doom3 could kill your board??? Was the Infinity THIS jumpy ??? :D :lol:
Or was it YOU being nervous about that game, that you kicked your rig accidentally? ;)
i didnt mod the chipset voltage but i did run it at 1.9v (bios)
i did take off the northbridge sink, and saw a sort of black paste where it should be white...not as bad as the epox i killed at 2v though...
is the an7 worth it or should i go infinity again?
The AN7 is like the Infinity... you gotta be lucky to get a good one... if you get such board, it rocks. :)
And this vdd cannot kill your NB... it must have been something else. I ran my old (first) NF7-S 1.1 at 2.8V vdd some time... no harm done. The NB is the last one dying. The feeding transistors are more likely to die.
it did have some sign of burn though. the white paste was burned black on the top tip section and bottom tip section
Yeah... That's why I was saying: must have been something else that burned the NB. Definately not the vdd... ;)Quote:
Originally posted by Naasar
it did have some sign of burn though. the white paste was burned black on the top tip section and bottom tip section
hmm, does the NB feed from the 12v line or 5v?Quote:
Originally posted by SAE
Yeah... That's why I was saying: must have been something else that burned the NB. Definately not the vdd... ;)
5V. Vdd is taken from the 5V rail as well as Vdimm :)Quote:
Originally posted by Naasar
hmm, does the NB feed from the 12v line or 5v?
I think a part of OVP/OCP has failed and burnt the NB there. Let me guess... Made in China - Infinity?? :D
correct...Quote:
Originally posted by SAE
5V. Vdd is taken from the 5V rail as well as Vdimm :)
I think a part of OVP/OCP has failed and burnt the NB there. Let me guess... Made in China - Infinity?? :D
:DQuote:
Originally posted by Naasar
correct...
Good luck with your next one... hope you get a good Infinity :thumbsup:
Hi guys,
I need some serious help.
My spec's:
Mobile 2600
Infinity mobo
OCZ dual channel 2x512 pc 4200
ATI R9800xt
I had a 230 fsb with the stock bios. This was stable.
But somehow I can't past 200 anymore. It's very unstable. That's very weird because I hit the 230fsb for the very first time. And now not even past the 200. I want to get that 230 fsb again. I also have tried beta and alpha bios with no succes.
What should I do?
Please help me.
could someone try this bios
http://black.s3.cybton.com/N24LD138.zip LP B
some new features like shutdowntemp, warn temp,
beta options like 1.5cas, 3.4-3.6vdimm (probably won't work)
1/21 romsip
use at your own risk!
don't use it without bios savior
hey guys,
anyone know where i can find out what the lights on my keyboard flashing means? i cant seem to find codes anywhere.
it flashes on for like 1 or 2 secs then goes off. then it repeats this over and over...
i have tried 2 different cpus, different ram:confused:
Quote:
Originally posted by Blackout
could someone try this bios
http://black.s3.cybton.com/N24LD138.zip LP B
some new features like shutdowntemp, warn temp,
beta options like 1.5cas, 3.4-3.6vdimm (probably won't work)
1/21 romsip
use at your own risk!
don't use it without bios savior
i tested and 3.4 3.5 and 3.6 only gives 2.6v
cas 1.5 doesnt work with me,seens to be the memory,i try evem at 100mhz fsb and 3.3 vdimm,the board beep beep and only light up led number 3.
so if it is possible to ad more cas values?so 1.95 1.90...and others?
hmm, what is the SB Vdd mod actually for?
also is there guide on the cap mods? it's hard to see with all that tape
Sorry, I try to confirm my previous posting about LP B with 1/31 BIOS won't work with Duron Morgan core...Quote:
Originally posted by Massive
Yes...so I guess I won't be able to use my rig for a while until I get my new Barton :( ...
All of the four led indicator is on anyway...but it don't even post to BIOS..
I still think its kinda strange...I guess none of the LP B user use their system with low proc like Duron...so its kinda forgotten on BIOS update...
I'll give u an update until I get my new Barton...if its worked...then it must be the mobo that doesn't compatible with Duron...
On my previous mobo EPOX 8RDA+ this Duron is worked fine...and I switch my Barton and Duron without a hitch...I still choose for the EPOX if it only could do high FSB without modding.......
or maybe someone got somethin I should try again?
And YES...it just won't work with Duron morgan core...because when I have my new Barton mobile it doesn't have problem and the comp went perfectly fine...when I try to change it with Duron morgan core again...it won't post to anything not even a single bip...
so maybe this news could be useful for those of u which has LP-B with 1/31 BIOS which considering put Duron MOrgan core on it :D
anyone can help me.... i need to buy new memoery for my lanparty.
I i dont know how to choose.
the options are.... only in 2x512mb
ocz 3700eb
ocz gold rev2
crucial ballistics ddr400
ocz plat rev2
thanks!!!
1. Crucial ballistics ddr400Quote:
Originally posted by AlvoMod
anyone can help me.... i need to buy new memoery for my lanparty.
I i dont know how to choose.
the options are.... only in 2x512mb
ocz 3700eb
ocz gold rev2
crucial ballistics ddr400
ocz plat rev2
thanks!!!
2. Ocz 3700eb
do u know what chips on the memories above?Quote:
Originally posted by Lastviking
1. Crucial ballistics ddr400
2. Ocz 3700eb
LANPARTY NFII ULTRA B 2004/1/21 BETA BIOS
ive installed this on my mb, and mech did not boot again. what could be the reason? any one got any ideas?
for user with cooling under 0 celcius...better use the 1/31 BIOS...1/21 BIOS turn the hardware sensor protector on in BIOS by default...so sub zero users won't make it with this BIOS...unless before u using sub zero cooling u turn it off the options on the BIOS first...Quote:
Originally posted by 3x0
LANPARTY NFII ULTRA B 2004/1/21 BETA BIOS
ive installed this on my mb, and mech did not boot again. what could be the reason? any one got any ideas?
and with the 1/31 BIOS its already fixed...so 1/31 would be more "subzero" friendly....change the BIOS bro
I hope that would help :D
hey dude i noticed 3.2 its the best after a clean windows installQuote:
Originally posted by SAE
Yeah. CATs 3.1... those make you loose some frames in nature, but the gains you get in the other tests and the higher graphics clocks make up for it...
I tried 3.2, 3.5, 3.7 and 3.1 were the best.
but i gain like 500pts in 3d01,, but my 3d03 score reduce like 500 pts :( .. any other driver to 3d03?:confused: , im currently at
axp 2800@2.4ghz 230x10.5, 9800p 420\380 , 3dmark01 is like 19.X but 3dmark03 is like 6.3k (lol):stick:
3.2 is better? What card and what bios (card, brand)?Quote:
Originally posted by Bad-Religion
hey dude i noticed 3.2 its the best after a clean windows install
but i gain like 500pts in 3d01,, but my 3d03 score reduce like 500 pts :( .. any other driver to 3d03?:confused: , im currently at
axp 2800@2.4ghz 230x10.5, 9800p 420\380 , 3dmark01 is like 19.X but 3dmark03 is like 6.3k (lol):stick:
For 3dm03 there's no better driver than the 4.9beta IMO (DNA 2448 or so using it) :D
where are the pics on the very first post?
if you need them hosted i can do that ;)
Just to update things here ;)Quote:
Originally posted by Hellfire
THE NEW 8KA BIOS!!!
Its been a while since I've released a bios so here goes, many things have been changed in this bios. Also instead of the voltages being set to Auto, I have disabled that to show the real default voltage that the board is booting at. ;) I also set most of the important things for the common overclocker in the bios for you all. The romsip used in this bios is a heavily modified verison of the 1/21 romsip, rebadged to the HF'S MDP RS. Well good luck trying out these bioses.
PLEASE USE THESE BIOSES WITH CAUTION AS I AM NOT RESPONSIBLE FOR DAMAGE CAUSED TO YOUR BOARDS. :)
Rev1 was used in testing stage by our great bios testers and was further modified for increased performance.
Things included on the 8KA Rev.2 bios are:
- Hellfire's MDP Romsip -- Based off the 1/21 Romsip
- L12 mod built-in
- Cpu Interface Optimised
- Included option to change CPU Warning Tempurature
- Included option to change Shutdown Temperature
- Cured some warm boots problems
- Changed SATA bios from 5.0.39 to 5.1.27 (Modified By Me To Work With Mobo)
- Many Things Set In Bios For Overclockers In Mind ;)
- No more Auto on many Voltage Options, Displays default voltage instead.
Hellfire's 8KA Rev. #2 Bios for Infinity
The mods on the LanParty 8KA Rev.2 bios are:
- Hellfire's MDP Romsip -- Based off the 1/21 Romsip
- L12 mod built-in
- Cpu Interface Optimised
- Included option to change CPU Warning Tempurature
- Included option to change Shutdown Temperature
- Cured some warm boots problems
- Changed SATA bios from 5.0.39 to 5.1.27 (Modified By Me To Work With Mobo)
- Many Things Set In Bios For Overclockers In Mind ;)
- No more Auto on many Voltage Options, Displays default voltage instead.
- Remove Lanparty Boot Logo
Hellfire's 8KA Rev. #2 Bios for LanParty
ENJOY!!!!!!
BTW...
Big Thanks to SAE and Sound98x for testing Rev. 1. :)
Btw 245x10.5 now primestable :D
Good luck on you guys!
PS: Great work Hellfire ;)
not good for Doom3 :? back to Rev #3... added an 80mm on mosfets, running now @ 245x10.5 primestable :D
yeah, that bios rocks :)
i think it's time for more bandwith. it's more stable than the 1/21 what i have before.
Hey guys!
I have a slight problem, well several actually.
vcore
I did the vcore mod and I did cut the trace as was posted HOWEVER with the trace cut it wouldnt start at all so I resoldered it and was able to boot but now anytime I go above 1.85V the machine hardlocks, any reason why? I didnt do the vsense or vdrop mods but would they have an impact on this?
vdimm
I have 1 stick of 512Mb Corsair XMS 3500CAS2 memory, im able to boot and run memtest86+ at up to 265fsb (CPC ON) (mem voltmodded and runs at 3.6 btw) however I get corruption, 240 seems good but after some ut2k4 it crashes violently. I also have 2x512 Megs of Mushkin lvl2 black which seems ok up to 260 a well (CPC off) I havent tried with these too much since they are stuck in my server but I will try them as well, the weird thing with these is that they wont do the rated 217 with CPC on even.
My vdd is modded as well and I have tried it up to 2.1V but it didnt seems to improve stuff so I dropped it down to the regular.
vgpu
Got a Radeon 9800XT which I have modded mem and gpu on and its clocked at 485/410 I have gone above the 10% spec limit but I might try more after the comp has stabilized.
Anyway, any suggestion? Especially something on the CPU would be helpful! Btw the machine is waterchilled cpu/nort and gpu (the L30 kit) and I score about 7390 3dm03 with a 1700+ clocked at 2.4Ghz.
Damn, now the pics are gone - hope not for good...? :stick:
BTW, Im now about to start the project of resurection of my old Epox 8RDA+, on witch my capacitors died - since I strongly believe that replacing them make the mobo kick again ;)
So, where do LastViking get the capacitors that he show on the pics? I can find in local shops "normal" ones, but they are hardly to 50C rated (and they exploded under 20min of usage, witch my 8RDA+ experienced "live"). And these the 8RDA+ has are rated at 2200mF 10V T31A and 105C - so I think that about 3300mF at 12-16V and 110 - 115C is desirable.
Any ideas? :rolleyes: :confused:
Take them from a dead board.Quote:
Originally Posted by trodas
can you give me a link for download the "Morpeus Remix Extreme video driverset"?
thank you guys...
PLEASE HELP!!!
My english is bad.. sorry
I have NFII ULTRA INFINITY and i need up to 2v Vcore
I want modd Vcore, but i dont no how.. :(
In this topic
dont show picture on Vcore modd! :( :(
Maybe send me to mail picture and description how to do... laamers@inbox.lv
And what better in BETA BIOS
NFII ULTRA INFINITY 2004/1/21 BETA BIOS
and
NFII ULTRA INFINITY 2004/1/31 BETA BIOS
i have a original DFI BIOS
Thanks! :toast:
I hope that contributes to the whole Vcore, OCP and vdroop problematic!
:D :toast:
hey, there is another point for the the vdimm mod on the backside!
why nobody told me that :D
Testing vcore mods: SP 1M tested 2.256V - 2.304V.
Vcore+Vsense+Vdroop.... modded Infinity.