White 800D :hump:
Printable View
White 800D :hump:
Are those aluminum fans good? O__o
Thanks guys!
They are pretty decent, moves a lot of air but the only problem that I do have is the noise level..... which i can live with :DQuote:
Originally Posted by pcaddict
Heres a short little teaser vid I did of my build with the 800D :)
http://www.youtube.com/watch?v=D4d47OXjG2A&fmt=37
Then Some Pics :D
http://farm5.static.flickr.com/4085/...482cd7c6_b.jpg
http://farm5.static.flickr.com/4088/...8339e01a_b.jpg
http://farm5.static.flickr.com/4105/...8d576915_b.jpg
http://farm5.static.flickr.com/4150/...d219a914_b.jpg
ooooo, tubing was glowing :D
One off the best 800D´s that I saw...Quote:
Originally Posted by Batiatus
Congratulations! :clap:
Thanks man. A lot work still need to be done though...Quote:
Originally Posted by XpLod-
http://www.sweclockers.com/image/gal...nal&k=4f8c543b
going to add som more rads next week i think :)
Nice rig man! Those dual 295's must heat the hell out of your loop. How does your cpu handle it?Quote:
Originally Posted by Ogge_swe
idle temp 60c, not good :p:Quote:
Originally Posted by mlee49
http://i986.photobucket.com/albums/a...g?t=1287116286
Hi added a Crucial SSD C300 64gb and a Lian Li EX-33R1 Internal Hard Drive Cage with a Noctua NF-P12 fan
http://i986.photobucket.com/albums/a...g?t=1287117191
put some red perpex over back vents
Pics of the front please :)Quote:
Originally Posted by firehawk_2010
Where did you get the LIAN-LI cage btw?
http://i986.photobucket.com/albums/a...g?t=1287202087
Hi Corpses3 quick pic of the front i've been getting a black lian-li cage to try,ive taken the red led fan out and put a noctua in the red bay , i get most of my parts from overclockers uk thanks :)
Thanks, but please moar pics of the front, looks so nice :DQuote:
Originally Posted by firehawk_2010
:hump::hump::hump: moar moar moar
@Firehawk - Pretty clean set up man.. simple and consistent, more pics would be nice :D
@Ogge - Is that a secure loop? it doesnt leak? regardless, nice rig!
Here is my updated 800D
http://img.photobucket.com/albums/v6...00DClassy2.jpg
http://img.photobucket.com/albums/v6...00DClassy1.jpg
Have to loose my EK bridge because of the Classified E760's PCI lane distribution. Both 5870's are in 8x mode at the moment. Have some sleeving left to do and use a black SATA cable for the optical drive. May also paint the optical black so it doesnt stick out like a sore thumb.
Also really dont like the res in the way. Makes the sleeved 24 pin a huge PITA to work with and get it looking nice. Also have so much flow that I cannot purge all the bubbles out of the system even with the pumps at min voltage.
Overall, pretty happy with it, but looking forward to starting my next rig :)
Looks great Damon. Shouldn't the Classified's PCI-E lane distribution work like this:Quote:
Originally Posted by turtletrax
First slot is 16X if second slot is empty, third slot is 16X if 4th slot is empty, ( basicly 2 cards at 16X, or 3 at 16,8,8, or 4 at 8,8,8,8 See below )
<16
<X
<8
<8
Or
<8
<8
<16
<x
or
<8
<8
<8
<8
( Note the 1X slot will not affect bandwidth, but placing a 1X card in any other slot will )
It looks like you have the 5870's in the first and third slots with nothing in the 2nd and 4th. Is that right?
Don't you hate reservoirs, never a good place to put those bastards. :rofl:
Thanks Kirk :) Still needs work but is coming along.Quote:
Originally Posted by BlueAqua
I have the cards in slots 1 and 2 and would be happy with the first card in 16x and second in 8x, but both are in 8x for some reason :shrug:
I really like the parallel bridge and would love to keep it, also would save me draining the loop and putting in a D-plug.
Guess I'm a little late to the party.
Built in 12/09 - 01/10. About to get torn down though...
http://pictures.closetredneck.net/pc...worklog_63.jpg
http://pictures.closetredneck.net/pc...worklog_65.jpg
http://pictures.closetredneck.net/pc...worklog_67.jpg
http://pictures.closetredneck.net/pc...worklog_76.jpg
Quick question can we have another angle of your case I wanna check out the bottom compartment
Thanks
V1ral
Quote:
Originally Posted by ibonbird
That is gorgeous :up:
What fluid are you using?
3d surround, eyefinity wallpaper :D
http://fc03.deviantart.net/fs70/i/20...an-d31bpq3.png
Hi-Res
link
Excellent work ibonbird :up:
I love your machine :worship:
god that looks amazing, I wish it was a little bit smaller, 800d is a monster i was hoping the 700d was going to be a tad smaller
Quote:
Originally Posted by Batiatus
3/8 tubes over 1/2 barbs, no leaks :), the rig is taken apart now, adding more rads :)
adding another rad.. will help to get this temp down :up:Quote:
Originally Posted by Ogge_swe
one RX240 and one RX120 will be added, rig is finnished next week i think :)Quote:
Originally Posted by Batiatus
My 800D :D
http://cbiwebhost.com/pix/images/ocau/pc/CPU-Block.JPG
Downstairs
http://cbiwebhost.com/pix/images/oca...own-stairs.JPG
Overview Top-Half - Need to clean my Radiator :P
http://cbiwebhost.com/pix/images/ocau/pc/Top-side.JPG
Backside Spaghetti
http://cbiwebhost.com/pix/images/ocau/pc/backside
Overall Shot, Cat interested :lol:
http://cbiwebhost.com/pix/images/oca...verall-cat.JPG
Got home from vacation to find my typhoon 4 as promised by Brian from primochill. While it took a year to get through several crappy typhoon 3's , I must admit the new reservoir is awesome. As soon as the typhoon 4 is released to the public I'll get pics of my 800d and the reservoir up.
Thumbs up to primochill for persevering through and finally delivering! And, yes I am very aware of all the issues and I don't give a hoot. Just glad I waited em out and took delivery of what seems to be a great product
I also caught the obsidian fever... :)
http://img529.imageshack.us/img529/185/27092010675.jpg
Ah, memories, side by side old case near new one. That was first strong impression from this enormous case for me aswell :)
Heh same here, When i picked it up from Umart, i was like :O this is huge! put it next to my old case i was like, :O:O:O this is freaking HUGE!!! now i look at my old case, going :O:O that is tiny!!!:rofl:
http://img191.imageshack.us/img191/7900/dsc09701gc.jpg
http://img812.imageshack.us/img812/8840/dsc09682h.jpg
http://img708.imageshack.us/img708/5001/dsc09686e.jpg
EDIT: Wow- resized that picture is a lot better than I thought it was- the first. It looks better at that size than the full 10.2 megapixel version.
EDIT2: My rig is such a hack job. I swear when I went out and bought all the materials I was hoping for such a better outcome. Not finished with it by a long shot- but I just can't help from jumping in with my weak isht
How are these when it comes to getting all the bubbles? I've always had my loop on a bench because I imagined moving these around is quite a pain..
If you let an efficient loop run for, say, a week, won't it self bleed?
Imho superb 700D build. Worklog link (in dutch?).
If your looking to add more rad and need to be more efficient try this With the heat 470's and 480's put out this might be the way to go. I added a power supply extension to gain some room for a cleaner build and discovered that a 3x120 will fit. IT will be tight but its possible. You will need to put inlet /outlet pointing to back of the case and pull the rad all the way front with fans on the back side. this will allow for the 24 pin to have plenty of room and only a few cables on the outside of the power supply will be affected. this will leave about 2" between supply and rad. There are also some edges on the front side that need removed. My build is posted in the liquid cooling build section. Project CARBON
http://img834.imageshack.us/img834/1522/dscn0104l.jpg
http://img834.imageshack.us/img834/5196/dscn0107z.jpg
http://img834.imageshack.us/img834/24/dscn0110y.jpg
hi all :)
thank you all for posting in my thread :)
i´m currently rebulding my wc loop
nearly finnished
http://www.sweclockers.com/image/gal...nal&k=a6bac7a1
GT fans is going to be painted red like shazza did with hers :)
and some BP 45 degree and some BP compression is going to be added :)
I like that cat. I'm sure he is wondering what's so interesting in there, and why he is spending all day long messing around in there :rofl:Quote:
Originally Posted by brayway
Ogge, I see that you've added the rad. Nicely done man :up:
Hows the temp?
Quote:
Originally Posted by Batiatus
thanks :)
a lot better, 45c load on all gpus and 50c load on the cpu witch is slightly overclocked :)
Does anybody know if a a PA120.3 can fit in this case?
yes it does. i have one in mine :)Quote:
Originally Posted by slowfreight
and please make this rig better with suggestions :)
Corsair Obsidian 800D from Vietnam
http://i1200.photobucket.com/albums/...dwallpaper.jpg
More shots of yours please thienloi, it looks amazing!
Not as awesome as most on here but, I try...
http://i1200.photobucket.com/albums/...f/100_1556.jpg
^^Nice rig, how are temps with the tri-sli?
Ogge_Swe, no clamps, ties, nothing on tubes?? Not recommended.
Please post more pics of that rig... Its amazing... :up:Quote:
Originally Posted by thienloi
tubes will not come of, 3/8 tubing on 1/2 barbs. :)Quote:
Originally Posted by ggdh
I'm finished with my rig for the moment:
http://i619.photobucket.com/albums/t...lcius/case.jpg
My camera is old but it looks much nicer in person. The 800d is great at hiding cables. :D
Now it's time to get some games for it. :up:
Quote:
Originally Posted by thienloi
more pleaseeeee!!
Here, the project isn't finished yetQuote:
Originally Posted by Phaseshift
http://vozforums.com/showthread.php?t=1394284
h0ly cow that black freezer mb block for the rampage looks awesomeQuote:
Originally Posted by game_matter
New Black in black rev Obsidian 800D is ready...
http://img241.imageshack.us/img241/5158/p1030491.jpg
http://img202.imageshack.us/img202/2453/p1030473i.jpg
Mayhems Dye Acid green UV old rev
http://img693.imageshack.us/img693/6489/p1010167p.jpg
http://img831.imageshack.us/img831/9897/p1010905f.jpg
and long time ago...Feser Blue UV
http://img191.imageshack.us/img191/5818/dsc04321hr.jpg
http://img338.imageshack.us/img338/3803/p1120175.jpg
I really do like what you have done with the mesh!
Thanks,mesh is powder coated 1mm aluminium sheet.
How is it affixed there?
Looks fantastic! Very nice work! :up:Quote:
Originally Posted by Elder
Simply,perfect fit.Quote:
Originally Posted by brayway
Hold up better if you use adhesive 3M tape.
zalbard thanks,my new project coming soon.
This time red...maybe
http://img109.imageshack.us/img109/7500/crw0804.jpg
Just the beginning of my 700D fitted with the 800D hot swap drive bay.....
http://i457.photobucket.com/albums/q...00D/700D-3.jpg
http://i457.photobucket.com/albums/q...00D/700D-4.jpg
http://i457.photobucket.com/albums/q...00D/700D-1.jpg
After stripping.....
http://i457.photobucket.com/albums/q...00D/700D-5.jpg
Now it's time for a little cyber grey metallic paint to match this.....
http://i457.photobucket.com/albums/q...700D/008-1.jpg
http://i457.photobucket.com/albums/q...0160_2-1-1.jpg
I'll have pics soon after painting.....
Mine, not quite finished but pretty much there:
http://i111.photobucket.com/albums/n...hcamp/50-1.jpg
http://i111.photobucket.com/albums/n...hcamp/51-1.jpg
I really do like red&black rev in 800D:up:
Looks fantastic!
Did you use Aquacomputer Double Protect Ultra Red coolant?
No, it's Feser One coolant.
It's a toss up for me, both red & black or orange & black really stand out well. Nice clean setup Gareth, looks good!
I prefer Blue & Black but the hardware forced me to go with Red. I'm not that dissapointed though as for Red I quite like it, I do think it's harder to make a Red system look good than a Blue one.
2x watercoolig sys
CPU I7 950
Rampage Extreme III
XSPC RX360 + Laing DDC - 1Plus 10W - PRO XSPC
GFX480 x2 MSI
XSPC RX240+480 + Laing DDC - 1Plus 10w- PRO XSPC
should be quiet,but with room for oc
I thought I would post some pictures of my modded 800D case for those that do not visit the Liquid cooled section. I am in the middle of my Project CARBON build and have gotten the case all but finished and will be starting to add the components soon.
http://img560.imageshack.us/img560/4255/dscn0404.jpg
http://img560.imageshack.us/img560/1479/dscn0392.jpg
http://img543.imageshack.us/img543/4061/dscn03810.jpg
http://img560.imageshack.us/img560/4040/dscn0408s.jpg
http://img151.imageshack.us/img151/2566/dscn0286l.jpg
hi your reservoirs for video needs to be big, otherway your video card are going to overheat. you should put a 360 only for 2x 480. if you not overclocking them, them the setup is find for now......
Quote:
Originally Posted by Gareth
Very clean! Like the red and black as well:clap:
Eforced, nicely done on swapping those HDD cages ... never thought it would fit that way.
Slotrod, I like what you did on both side panels :)
Hi, my corsair obsidian 800D =):
http://i220.photobucket.com/albums/d...7/_MG_0002.jpg
http://i220.photobucket.com/albums/d...7/_MG_0020.jpg
http://i220.photobucket.com/albums/d...7/_MG_0013.jpg
http://i220.photobucket.com/albums/d...IMG_0003-1.jpg
http://i220.photobucket.com/albums/d...7/_MG_0017.jpg
Two mcp 655 pump, with the EK-D5 X-TOP rev.2 in each one.
http://i220.photobucket.com/albums/d...7/_MG_0019.jpg
http://i220.photobucket.com/albums/d...7/_MG_0028.jpg
I don't like too much the lights so my case is simple =).
bye!
PD: im new in the forum, so its too large this size of pictures?
Hmm, i like those two fans on window. Out of curiosity, what radgrill you used on top of case?
A Phobya one.Quote:
Originally Posted by churchy
Just got done with the laser cutting of the 700D panel, acrylic, and the outside frame of the panel for my 800D! This eliminates having to see the power supply and lower chamber. :up:
http://i457.photobucket.com/albums/q...D/IMG_1139.jpg
http://i457.photobucket.com/albums/q...D/IMG_1138.jpg
http://i457.photobucket.com/albums/q...D/IMG_1137.jpg
Oooh very nice, where, and how much was the panel?
Wouldn't mind a new one for my case, to hide the PSU.
I took the panel off the 700D so that I could custom cut it and use it on my 800D. Now I have a stock 800D panel with no use for it.
Ahh ok, i think someone mentioned on another forum a while ago that Corsair would send you one for like $50 or $70
post some pics with the case panel on please , giving me ideas :)
The cost of the blank panel on their web site is $19.99 I did the same thing here
http://img543.imageshack.us/img543/4061/dscn03810.jpg
[
I'd be interested in purchasing your 800D windowed panel - let me know if you're down for selling it... thx!Quote:
Originally Posted by EForced018
Only $19?! thats tempting..... :P
i picked up a 700d at the local microcenter for 179.99 with a free side panel with window. so essentially i have an 800d without the hot swappable bays. put everything in and i cant believe how clean it looks and how much extra space there is. i plan on setting up a water cooling loop with an rx360 on top and blocks on my i7 950 and gtx 470. i'll post some pics of my current air cooled setup. i'm also in the process of sleeving all the power cables not hidden behind the mobo tray.
and since i have the stock side panel that came with the 700d just sitting collecting dust, i think i'm going to cut that up and use it to enclose the bottom psu bay since it has the same finish as the rest of the case
also, does anyone know of some good uv reactive green 140mm case fans? i have a few gelid wing 12 uv green fans that i love and would like to replace the rear 140 with one similar to that.
Try this,look awesome in UV.
Nanoxia DX14-700 140 mm Fan (UV Reactive)
Pics of my old rev
http://img94.imageshack.us/img94/760/p1010177o.jpg
http://img693.imageshack.us/img693/6489/p1010167p.jpg
Elder, thanks for the help. Real nice pics. I saw the pics if your other revs as well, and I must say your full setup is gorgeous. I'm trying to get my finished product to look similar to yours
Sent from my Nexus One using Tapatalk
Thanks morencyam
If you want see more,check this...
http://forum.pclab.pl/topic/581684-O.../page__st__100
You wouldn't happen to know anywhere to get them would you? I tried googling it and couldn't find them for sale anywhere
Sent from my Nexus One using Tapatalk
Yes,DX14-700 is hard to buy... try here
http://www.kustompcs.co.uk/acatalog/info_2594.html
http://skinflint.co.uk/eu/a466639.html
Just saw this thread, made some changes since I posted rig in the lc gallery.
Thanks, more pics:Quote:
Originally Posted by Phaseshift
http://i1200.photobucket.com/albums/.../prj800d32.jpg
http://i1200.photobucket.com/albums/.../prj800d33.jpg
http://i1200.photobucket.com/albums/.../prj800d36.jpg
http://i1200.photobucket.com/albums/.../prj800d35.jpg
After cutting out the frame and acrylic I decided the panel window was too small so now I'm creating another frame and window for it on the laser. I have no need for the frame and acrylic window already made if anyone has interest in it for another case they have that would fit it.Quote:
Originally Posted by Johnny87au
Frame and acrylic viewable inside dimensions are approximately 13 1/4 W x 10 1/2 T or other way around if you decided to mount the window taller than wider. Frame is 1/8th thick and frame width all the way around is 3/4 of an inch. I made the frame so that it overlapped the panel opening by a 1/4 of an inch for aesthetics and a clean look.
@Elder: what RAM kit are you using?
In old rev GEIL EVO ONEQuote:
Originally Posted by game_matter
http://www.geil.com.tw/products/showGallery/id/129
http://img199.imageshack.us/img199/8625/p10209710.jpg
now,in new rev G.Skill Trident 2000 MHz DDR3
http://www.techpowerup.com/reviews/G...16000_6GB_Kit/
http://img718.imageshack.us/img718/852/p1020579w.jpg
Awsome! What is the connector between the res and the pump? 1/4 to 1/4, where can I buy that?Quote:
Originally Posted by Elder
Thanks Nightprowler
Connector between the res and the pump?
Bitspower Premium Mini Shiny Silver D-Plug Set or similar.
Short:
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_346_393_ 621&products_id=24676
Long:
http://www.performance-pcs.com/catal...ducts_id=22623
Longest:
http://www.performance-pcs.com/catal...ducts_id=24678
Well this is the only recent pic I have online, I've changed it way too many times to keep up! :p
http://farm5.static.flickr.com/4107/...4f3bc2ec_b.jpg
What you can't see there is that the rad up top is a 480GTX, with 38mm panaflos on it.
Nothing installed yet, just the HPTX tray stuffed in: http://www.xtremesystems.org/forums/...d.php?t=263480