Official Intel Gulftown (Westmere) Overclocking and Batch Tracking Thread

Printable View

Show 100 post(s) from this thread on one page

10-09-2010, 06:09 PM
nightwoodwolf

Quote:

Originally Posted by Jp7

3003B is NOT a stable and safe batch....safe batch are 301x, 302x, 303x

lets analyse a bit here, if you look at the first page

#3003B287 running on Gigabyte, EVGA boards with vcore ranging from 1.458v to 1.520v

# 3003B396 running on EVGA, Gigabyte boards with vcore ranging from 1.376v to 1.435v

all with water cooling, of course different factors should be considered like ambient,board overclocking capabilities , type of water cooling parts.. etc

i am trying to gather from this thread and reading on other forums, so far i hear the 3003Bxxx is GOOD batch for the Gulftown

every now and then we read a thread about cpu or gpu waterblocks round up, or other stuff, i am waiting for some lab to come up with Gulftown batch roundup, but maybe due to the price and changes of batches this might be hard to do .. hope it will happen soon.
10-09-2010, 07:39 PM
zalbard

It might be my personal opinion but all the current Gulftown batches are crap for overclocking 24/7. They do not offer a decent clock speed increase over 920 D0. We need a new stepping, or something. So far it is very unimpressive for ambient cooling. Unless you really need 6 cores...
10-09-2010, 10:52 PM
mbreslin

The chip in my sig has been stable since launch, 3003B396. From all the threads I've seen it's about average as far as vcore required. I've had it to 5ghz on water able to pass some benches, 1.6ish vcore.

I agree with zalbard certainly the 920 is the better buy if you don't have a specific need for the extra cores, the overclocks are around the same.

In fact I would say the 920 is a much better chip for 24/7 since you can pump vcore and if it dies early you're not out the 1k that a 980 costs. I have been temped to stick my 920 in and crank vcore and run it at its max and use the 980 as a backup. :)
10-09-2010, 11:52 PM
Cookiesowns

http://img524.imageshack.us/img524/8724/validation.png

Specs in Sig.
10-10-2010, 05:11 PM
nightwoodwolf

Quote:

Originally Posted by mbreslin

The chip in my sig has been stable since launch, 3003B396. From all the threads I've seen it's about average as far as vcore required. I've had it to 5ghz on water able to pass some benches, 1.6ish vcore.

I agree with zalbard certainly the 920 is the better buy if you don't have a specific need for the extra cores, the overclocks are around the same.

In fact I would say the 920 is a much better chip for 24/7 since you can pump vcore and if it dies early you're not out the 1k that a 980 costs. I have been temped to stick my 920 in and crank vcore and run it at its max and use the 980 as a backup. :)

dont say that you gonna make me regret selling my 930 D0 which i've been using it for few months and never had an issue, its an awesome chip
10-10-2010, 07:23 PM
nightwoodwolf

the other thing is every store i call or any online store i look at the don’t give me the batch number ( that’s if they have it in stock ) , and i just came back to my desk after spending my lunch break searching 6 pc shops and the funny thing is they don’t have it in stock ( we can order it for you sir but cant grantee the batch number ) well duh i can order it myself online and it might be even cheaper.
10-11-2010, 01:02 AM
[DRACO]

Quote:

Originally Posted by BenchZowner

3005F758T #1
CBB approx -120C @ Dual Channel
CB approx -170C @ Dual Channel
LN2, Hexus PiFast 6.2GHz @ 1.75V @ -128C @ 6c12t
LN2, AquaMark 3 max 6.3GHz @ 1.8V @ -160C @ 6c12t
the results of a very quick test in a crowded room with people bothering me all the time

hello

maximum goes up your cpu? 3DMark06? max 3dmark05?

thanks
10-15-2010, 06:18 AM
[DRACO]

Bacht 3005F758T anyone has this and tell me you can do in the 3DMark05 and 3DMark06?

I come next week

thanks
10-15-2010, 10:58 AM
Bullu$

Picking up a #3003B396 tomorrow.

Tried to use qpi@slow-mode but I can't even boot into windows. If I set it to Auto, nothing is wrong.
Are there people who's also got problems with UD7 rev2?
10-20-2010, 02:45 AM
[DRACO]

and I get this cpu 3018b179

http://img177.imageshack.us/img177/6234/20102010217.jpg

http://img156.imageshack.us/img156/5...063018b179.jpg
10-23-2010, 03:34 AM
donmarkoni

Here are some results on water for batch tracking purposes. :D

http://img842.imageshack.us/img842/4452/980xsmall.jpg

3DMark06 @ 4.61GHz
http://valid.canardpc.com/cache/banner/1443589.png
http://img109.imageshack.us/img109/1...xsmallk.th.jpg

3DMark06 @ 4.74GHz
http://valid.canardpc.com/cache/banner/1443942.png (sorry for the s/s with dropped multi, I wasn't paying attention when I took it)
http://img194.imageshack.us/img194/5...0xsmall.th.jpg

3DMark06 @ 4.79GHz
http://valid.canardpc.com/cache/banner/1443956.png
http://img824.imageshack.us/img824/4...0xsmall.th.jpg

3DMark Vantage @ 4.68GHz
http://valid.canardpc.com/cache/banner/1443887.png
http://img23.imageshack.us/img23/257/3dmvp28744.th.jpg

I'll do more tonight. ;) Maybe some more 3D benching on water @ 4.84+GHz
http://valid.canardpc.com/cache/banner/1443972.png
10-23-2010, 07:38 PM
nightwoodwolf

hmmm 4.68MHz and 1.46v ... that looking good :up: nice chip you have donmarkoni

whats the temp like with that voltage ?
10-24-2010, 08:12 AM
donmarkoni

Quote:

Originally Posted by nightwoodwolf

hmmm 4.68MHz and 1.46v ... that looking good :up: nice chip you have donmarkoni

whats the temp like with that voltage ?

Would you believe me if I tell you I didn't even bother to run RealTemp? :D
With such low voltages I didn't care about temp, even @4.8GHz. ;)
I'll check next time and report back.
10-24-2010, 11:10 AM
angelreaper

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.

http://img839.imageshack.us/img839/8462/linx451000.jpg

http://img837.imageshack.us/img837/1...validate01.jpg
http://valid.canardpc.com/show_oc.php?id=1444923
http://img822.imageshack.us/img822/4...pi5ghz1000.jpg
http://img213.imageshack.us/img213/7...ench121000.jpg

Thermalright Silver Arrow and Intel I7 970 5ghz
10-24-2010, 11:37 AM
benniebeeker

mine is a 3020a457 and don't see much about it... anyone know anything about this batch??? right off the top the temp varies about 12 degrees... cores seem uneven... they pull closer at load though.. within 8 degrees...

i first noticed when i threw it on the test bench under the air cooler... i said, meh wait till i get it under water... i probably seated it wrong... not the case... its under a swiftech xt.. tried to reseat 3x... still no better... most uneven core temps i have ever seen... will be clocking soon...
10-27-2010, 02:40 PM
nightwoodwolf

whats gonna happen IF ....

did i read somewhere in this thread, about 980x dying while overclocking with even simple voltage, would Intel RMA them and send you a new one if the discover its overclocked !! or its just a matter of luck ? :confused:

i am asking cause i got the Asus Rampage III extreme a week ago and getting the gulftown tomorrow

Thanks guys
10-28-2010, 10:03 AM
donmarkoni

@algelreaper: Great chip you got there! :up:

Just a little update:

Quick SuperPI 1M run @ 5GHz before I went out last night. :D http://valid.canardpc.com/cache/banner/1451342.png
Sorry for the picture showing one multi less, but it was 5GHz run, as can be seen by result (and it is validated of course).
BTW, look at CPU-Z voltage. :rofl: I could overclock it to 5THz with such voltage. Just need a black matter deatomizer for cooling liquid nitrogen to -500°K.

http://img264.imageshack.us/img264/2...wn980x5ghz.jpg
10-28-2010, 10:10 AM
zalbard

Hm, looks like software voltage reading is a bit off.

...

:rofl:
10-28-2010, 10:10 AM
angelreaper

@donmarkoni thanks man:) Your also good:up:
10-28-2010, 11:09 AM
FlanK3r

Nice, i will try it too, nicely 39V ,-). Impossible kill your chip :-D.
10-28-2010, 05:03 PM
nightwoodwolf

so whats the max safe voltage for the gulftown's vcore ?
10-29-2010, 11:31 AM
donmarkoni

Quote:

Originally Posted by nightwoodwolf

so whats the max safe voltage for the gulftown's vcore ?

That would be a million dollar question. ;)
Intel's max specified voltage, before degradation steps in, in their opinion ;) is 1.4V, but everybody is obviously using same voltages as for Bloomfield when doing extreme overclocking. That's including me. I used to OC under water with vCore up to 1.6V and that's only .05V over Intels specs for Bloomfield. Now doing the same with Gulftown and that is .2V over specs.
So, there is no real answer to your question. We can theorize all day, but it is really up to you individually and voltages you are confortable with.
I try to stay under 1.4V/1.4V vCore/VTT for everyday use.
10-29-2010, 01:05 PM
godzzila

Quote:

Originally Posted by nightwoodwolf

so whats the max safe voltage for the gulftown's vcore ?

I think that 40V will be ok :D lol

I was 1,6V+ on water and chip is ok (two weeks). :)
10-30-2010, 02:31 PM
benniebeeker

at work, we killed a w3680 @ 4.6 1.58 volts after 3 weeks of straight number crunching...
10-30-2010, 02:37 PM
FlanK3r

my first air validation :)
http://valid.canardpc.com/cache/screenshot/1456183.png

5058 MHz 1.48V, aircooled
10-30-2010, 10:46 PM
Cookiesowns

Quote:

Originally Posted by flank3r

my first air validation :)
http://valid.canardpc.com/cache/screenshot/1456183.png

5058 mhz 1.48v, aircooled

batch?
10-31-2010, 12:58 AM
FlanK3r

the same as Splave has it :) here is the same batch
11-08-2010, 03:11 AM
havu2000

1 Attachment(s)

my 980X
i used water cooler
11-20-2010, 04:15 AM
nightwoodwolf

my first test with 980x

http://img138.imageshack.us/img138/1993/980x415ghz.jpg
11-20-2010, 07:48 PM
Q56_Monster

This is on sub-zero chilled liquid. Batch 3031A259.

http://img152.imageshack.us/img152/4959/p344271x580.jpg

http://img571.imageshack.us/img571/5611/1509980x.jpg
11-20-2010, 08:29 PM
Gautam

Those are some nasty clocks, but boy are you are playing with fire with those voltages. What sort of temps from the chiller?
11-21-2010, 07:53 PM
Q56_Monster

Those were at -26c. The Hexus-pifast voltage was only there for as long as the test ran, I quickly got outta there! I run vantage @ 1.71, but I don't know why cpu-z is showing 1.74. Anyway, you think I'm pushing it too much, even at -26c
11-21-2010, 08:55 PM
Splave

awesome! (but be careful) :D
11-26-2010, 08:55 AM
_AntLionBR_

TjMax the 980X is 101°C or 105ºC? Thanks!
11-26-2010, 10:31 AM
donmarkoni

Quote:

Originally Posted by _AntLionBR_

TjMax the 980X is 101°C or 105ºC? Thanks!

Mine is at 101. What does the RealTemp says for yours?
11-26-2010, 05:05 PM
_AntLionBR_

Quote:

Originally Posted by donmarkoni

Mine is at 101. What does the RealTemp says for yours?

Here is 105ºC at Real Temp. But then I saw the topic that the staff uses 101ºC, and ended up posting here too. Thanks for the reply!
11-26-2010, 05:22 PM
tompc3

I spent most of the afternoon to get here 4.511g. I just got this up and running
in the last two days this is my first i7 chip. I try to pay attention, read and learn
from you guys before I post something stupid....

I posted this in the 4.5g stable thread so I hope it is ok to post here too

motherboard is evga 770 classified 3
all air cooled
batch #3032A340

http://i188.photobucket.com/albums/z...l/980x4511.png

http://www.xtremesystems.org/forums/...239175&page=45
11-26-2010, 07:02 PM
_AntLionBR_

980X ES Q3QP 4.5GHz - still in testing ...

http://img9.imageshack.us/img9/2514/980x45ghz2.png
11-27-2010, 02:16 AM
FlanK3r

very nice tompc for aircooling!
I tried yesterday new validation and got this:
http://valid.canardpc.com/cache/screenshot/1503970.png
11-27-2010, 02:16 AM
FlanK3r

very nice tompc for aircooling!
I tried yesterday new validation and got this:
http://valid.canardpc.com/cache/screenshot/1503970.png
12-24-2010, 05:31 PM
Mr3D

i got my 980X a few days ago and only tested it very quick

batch 3036C128
anyone else tested a C batch?

http://img137.imageshack.us/img137/1289/20101222411.jpg
http://img269.imageshack.us/img269/4...hz3036c128.png
12-24-2010, 05:55 PM
pinto

Normal watercooling with 12°c ambient temp

3031A259

http://img696.imageshack.us/img696/7844/p10006941.jpg

http://img709.imageshack.us/img709/3391/wprime52ghz.jpg

http://img406.imageshack.us/img406/3246/3d0636437.jpg

http://img87.imageshack.us/img87/938...tagep50942.jpg
01-09-2011, 05:27 AM
CARLOS*A1

This is my 3rd i7 980X the 1er is (3005F725) 2nd (3005F725) 3rd (3013A825)

I think this bacht regular, it is difficult to get good batch

batch 3013A825

http://img585.imageshack.us/img585/9...rk06580gtx.jpg
02-03-2011, 02:59 AM
Postmodum

Hey guys... any word on 3003B batch? I'm checking a Xeon W3680 ... but don't seem to find anything about the 3003B batch
02-04-2011, 09:32 AM
crossg

1 Attachment(s)

Anyone had an issue with AIDA64 hanging on L3 write?. Tried different versions and it quits responding on L3 write. It passed a couple of times after 5 minutes. Maybe my chip is pooched? Batch 3036C076.
02-04-2011, 10:28 AM
enkie

My 980x Batch 3031a261 , watercooling :

http://i33.servimg.com/u/f33/12/23/45/17/lin-x_10.jpg

http://i63.servimg.com/u/f63/12/23/45/17/cine_b10.jpg

http://i73.servimg.com/u/f73/12/23/45/17/sans_p11.jpg
02-04-2011, 12:07 PM
crossg

1 Attachment(s)

^^ Nice . I don't get Vantage at all.:confused: I have my 980 clocked lower and my cards are are clocked different but look at the CPU score difference.
02-04-2011, 12:34 PM
enkie

Quote:

Originally Posted by crossg

^^ Nice . I don't get Vantage at all.:confused: I have my 980 clocked lower and my cards are are clocked different but look at the CPU score difference.

your cpu score is normal because you have the phys-x enabled :ROTF:
02-04-2011, 02:14 PM
crossg

Ah ha. LOL. That's because I post results on Evga forums with it enabled and I see you post results there too.. Keep forgeting about phys-x. ;)
04-13-2011, 02:08 AM
aussie-revhead

Guys, Im looking at moving from 2600K to a 980X, have any of you done this and is it worth it? Im on water and will be using it for 3D05/06/vantage/11 then some gaming.

Does any one have a 3020A457 ?

:up:
04-13-2011, 02:18 AM
st0ned

For gamimg 2600k >> 980x.

For 06, vantage, 11 980x > 2600k . Other 3D mark 2600k >> 980x.
06-23-2011, 04:39 AM
hyper_2002

Any one know anything about this batch i980x :

Q3QP
AT80613004800AD
3933B034
06-30-2011, 03:41 PM
enkie

new 980x 3031a241 at home (vcore 1.33 full on the R3E Black Edition)

http://i43.servimg.com/u/f43/12/23/45/17/980x_410.jpg
07-01-2011, 12:56 AM
kitfit1

1 Attachment(s)

3044B119 | Core i7 990x [6C 12T] @ 5009Mhz | 1.611 | EVGA Classified E760 | Phase

Attachment 116977

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 09:57 AM.

XtremeSystems