WIN Q6600 G0: guess my scores on GIGABYTE EP45-UD3

Printable View

Show 100 post(s) from this thread on one page

10-28-2008, 03:58 AM
shaithis

7.011
10-28-2008, 02:50 PM
Viss

Small update. Board #1 had some issues (FSB related). Not sure what but it wouldnt boot into XP over ~500 FSB. Received 2nd board today and with same hardware & settings it boots for the 1st time at 6x600 right away :)

As other UD3P boards it needs high VTT for FSB. Set 1.54vtt & 1.40vcore in bios for fast tests on crappy air HSF. LLC disabled. Not spi 1M bios yet :D

FSB:
http://img.photobucket.com/albums/v2...565VTT154v.jpg

Mhz:
http://img.photobucket.com/albums/v2...vbiosNOLLC.jpg

LN2 for 1M and max mhz validated as soon as possible :yepp:
10-28-2008, 03:21 PM
YukonTrooper

"Lower!", the mob cries. "Let's go Loc.o, let's go! For blood, for Gigabyte, for glory!"
10-28-2008, 06:44 PM
skinnee

come on 7.098!!!!
10-28-2008, 06:46 PM
systemviper

Sweet Run, man your gonna rock it when you really put the screws to it. :up:
10-29-2008, 04:56 AM
ME4ME

7.046 :)
10-29-2008, 06:38 AM
PcCI2iminal

go Bart

7.004
10-29-2008, 04:45 PM
Yeknom

7.029
10-29-2008, 08:46 PM
HDCHOPPER

6.743
10-29-2008, 09:04 PM
Pulpoh

6.807
10-29-2008, 09:16 PM
philbrown23

i dont even remeber what i put now, but hit the one I put w00t!
10-30-2008, 06:27 AM
radaja

6.868
10-30-2008, 09:09 AM
NaeKuh

ahahaha good luck loc.o

if i needed a X58 board id probably do something simular to you.
Only problem is i need a gainestown board more then a X58. :rofl:
10-30-2008, 09:12 AM
punx223

superpi 1m 7.325
10-30-2008, 10:02 AM
SnipingWaste

6.966
10-30-2008, 01:56 PM
Viss

First AIR TEST try with F4-4 superpi bios by Hicookie, thanks a lot mate its faaaaast :up:

http://img.photobucket.com/albums/v2...ualchannel.jpg

Dewar wil be refilled soon :yepp:
10-30-2008, 02:00 PM
Marvin_The_Martian

Hey you need to drop atleast a couple of seconds aight :rofl:

Make the dutchies proud, set a wr ( and give me a x58 board at the same time.. win win ) :up:
10-30-2008, 02:05 PM
WhiteFireDragon

i think around... 7.130 :D
10-30-2008, 03:00 PM
Revv23

Crap beating 12s at 4ghz.. thats some efficiency my friend.
10-30-2008, 03:03 PM
punx223

heres similar to what he can expec at mid 5's ghz....

now mind you this is not necessarily perfectly tuned

http://www.hwbot.org/result.do?resultId=778515

http://www.hwbot.org/signature.img?i...89&thumb=false
10-30-2008, 03:15 PM
Viss

Quote:

Originally Posted by Revv23

Crap beating 12s at 4ghz.. thats some efficiency my friend.

Thanks mate. Bios is very fast in 1M but 12 sec at 4ghz should be rather easy. I think average (untweaked) efficiency for simular setups is about 46500 / 4000mhz = 11.625 for 1M.

Started insulating the board today:

http://img.photobucket.com/albums/v2...P/IMG_5173.jpg
http://img.photobucket.com/albums/v2...P/IMG_5178.jpg
http://img.photobucket.com/albums/v2...P/IMG_5195.jpg
http://img.photobucket.com/albums/v2...P/IMG_5200.jpg
http://img.photobucket.com/albums/v2...P/IMG_5211.jpg
http://img.photobucket.com/albums/v2...P/IMG_5218.jpg
http://img.photobucket.com/albums/v2...P/IMG_5238.jpg
http://img.photobucket.com/albums/v2...P/IMG_5223.jpg
11-01-2008, 07:08 AM
Gendo

Looking good so far! Good luck with the LN2 run.

I suck at these kind of things but my guess is: 6.837. Just a slight improvement of your current WR:D
11-01-2008, 12:58 PM
RPGWiZaRD

Quote:

Originally Posted by loc.o

Thanks mate. Bios is very fast in 1M but 12 sec at 4ghz should be rather easy. I think average (untweaked) efficiency for simular setups is about 46500 / 4000mhz = 11.625 for 1M.

I get around 11.6 secs or just below 11.6 secs at 500x8 and DDR2-1000 4-4-4-8 TRFC 25 and PL7 or DDR2-1200 5-5-4-10 TRFC 25 PL8 on my P35-DS4. With Abit IP35 Pro board I had ~11.4 or just below that at same RAM configs I specified above but the board was a lot more unstable for me too.

So to me the BIOS looks quite fast, nothing groundbreaking, so it seems like the default Gigabyte bioses for this board has to be really uber slow (not like Gigabyte has ever produced some really fast bioses anyways) then if you think this bios is very fast. But that's just my opinion of course. Plz break 7 secs for us at least. :D

Since I'm still slightly interested in these UD3 boards, does hicookie's bios only work for the UD3 model or for all UD3, P and R models?
11-02-2008, 01:10 AM
Xtreme Addict

6.922

It's only Gigabyte :D
11-02-2008, 01:19 AM
dexster

6.987 ; just my guess :up:
11-02-2008, 11:18 AM
M3kk

6.780
11-02-2008, 12:25 PM
Paxi

7002
11-02-2008, 12:32 PM
Kensek

7.067
11-02-2008, 01:47 PM
smsmasters

6.528
11-02-2008, 02:06 PM
johnysb

6.770

reason for edit 6.768 already exists
11-02-2008, 02:25 PM
The0men

The easy way to know is just search the thread with the number you want to use in keywords.
11-02-2008, 02:33 PM
Just learnin'

7.047
11-02-2008, 05:43 PM
ZX7891

6.795
11-02-2008, 06:46 PM
imPurpleHaze

6.789
11-02-2008, 08:47 PM
jason str

7.013
11-02-2008, 11:36 PM
davidletterboyz

6.688s
11-02-2008, 11:51 PM
KanGaXx

07.125s
11-03-2008, 12:16 AM
boldenc

6.855
11-03-2008, 12:24 AM
zeraphine

6.514s
11-03-2008, 02:20 AM
pump101

7.007
11-03-2008, 08:07 AM
Lvcoyote

7.180
11-03-2008, 08:09 AM
[XC] Hicks121

Hey Loco, how's the benchn going?? Curious on the pi time :D, but also curious on this handles under ln2.
11-05-2008, 04:30 AM
Nickeleon

6.516
11-05-2008, 05:35 PM
clo007

6.938sec
11-05-2008, 06:09 PM
philbrown23

still nothing on this yet?
11-05-2008, 06:40 PM
YukonTrooper

Quote:

Originally Posted by philbrown23

still nothing on this yet?

Thread is open until at least the 15th, so don't expect any results until the end of the month.
11-05-2008, 07:17 PM
Sadasius

6.125
11-05-2008, 09:13 PM
SNiiPE_DoGG

6.518s
11-06-2008, 12:57 AM
Viss

Benched the Gigabyte EP45-UD3P :) Did my best to make it as fast as possible and best would have been new fastest 1M but unfortunately that's not the result.

I am not sure if its just my board (perhaps other's that have used LN2 on it can step in) but when temp gets a little lower then -100 degrees the system shuts down. The cpu likes cold very much though and needs it to shine. FSB is good but due to temp hard with multi 10. This resulted in a rather slow 1M for this E8600 unfortunately. Setup:

GIGABYTE EP45-UD3P bios F4-4
E8600 Q822A435
Ballistix 8500
8400GS
PCP&C 1200
F1EE

http://img.photobucket.com/albums/v2...UD3P/IMG_1.jpg

http://img.photobucket.com/albums/v2...UD3P/IMG_3.jpg

http://img.photobucket.com/albums/v2...UD3P/IMG_2.jpg

Superpi Mod 1M:
http://img.photobucket.com/albums/v2...D3P1M07250.jpg

So closest guess is Chad with his 7.258 seconds. PM me your info please.

Dont forget to congratulate him here :D and thanks a lot for your interest so far :up::up:
11-06-2008, 01:07 AM
Hoboclese

Congratulations!! Chad *mumbles something about steeling identities and rightful owner*

and thank you loco for fun comp. very clever idea
11-06-2008, 05:19 AM
CryptiK

Congratulations Chad! Well done, enjoy the cpu :up:

Thanks for running the competition loc.o, very generous of you indeed.
11-06-2008, 08:19 AM
Just learnin'

Excellent try loc.o! :clap: Thanks for the contest and congrats to Chad. :yepp:
11-06-2008, 08:19 AM
kylepaddock

go chad!!

where do you get LN2??
11-06-2008, 11:05 AM
Mads321

Gratz Chad.

And thanks for the fun loc.o :O)
11-06-2008, 06:33 PM
radaja

good job chad
11-06-2008, 06:39 PM
Revv23

Sweet nice clocking... Congrats chad!

Too bad about the cold issue. :( Is that your new e8600?
11-06-2008, 06:45 PM
Marvin_The_Martian

Congratz Chad hope you're happy with your new toys :up:

Lo.co darnit I really thought you would set a new wr ( and I think I had the lowest time in the thread just for fun ) ;)
11-06-2008, 07:01 PM
[XC] Hicks121

Congrats chad!!

Good to see you tried hard loc.o!! Too bad the board didnt work out so well brother. Its actually very interesting results to say the least.

Keep up the good work! :up:
11-06-2008, 09:57 PM
DeanZ

good job chad:up:
11-06-2008, 10:03 PM
slugbug

Congrats Chad :)
11-07-2008, 04:10 AM
NBF

Congrats Chad!

loc.o, very good job despite the result, pushed hard and did the best with the given tools.

You deserve one of those Giga X58. :up:
11-07-2008, 04:15 AM
Viss

Thank you all :)

Quote:

Originally Posted by Revv23

Sweet nice clocking... Congrats chad!

Too bad about the cold issue. :( Is that your new e8600?

Its the same E8600 i used before, i have had it for a while now.
11-07-2008, 06:48 AM
[XC] Synthetickiller

Nice work. :up:

Congrats :D
11-07-2008, 11:56 AM
YukonTrooper

Chad hacked my post and switched his time with mine! :censored:
11-08-2008, 07:43 PM
xms3500

Cograts chad, and thanks for the fun loc.o.:up:
11-08-2008, 10:54 PM
jason str

Good guess there Chad, glad to see i was not too far off.

Enjoy your new toy.:up:
11-08-2008, 11:28 PM
PrometheusCon

Nice guess! I was really hoping to see a new WR, but that'll be for another day I suppose.
11-09-2008, 05:03 AM
[XC] Oj101

Well done :up:
11-09-2008, 11:40 AM
clo007

Congrats Chad and thanks for doing the contest loc.o
11-10-2008, 01:10 PM
chad

Thank you so much loc.o:) Very creative idea. PM sent with information

Thanks guys!!!:clap:
11-11-2008, 11:55 PM
miahallen

Great work loc.o! Fun contest, good job chad, enjoy the CPU!
11-12-2008, 12:18 AM
HitandRun

7.000 was my guess even though I'm too late!
11-18-2008, 03:29 PM
chad

Thanks again Loc.o. :D:D:D Your a honost man.
http://img179.imageshack.us/img179/8199/dscn3466ui7.jpg
11-20-2008, 02:37 AM
johnysb

congrats man, are you gonna bench this?
11-24-2008, 06:20 PM
TheKarmakazi

congrats chad!
12-02-2008, 03:51 PM
slim142

Kinda late, but Congratulations Chad!
12-04-2008, 02:16 PM
vab206

gratz!
12-04-2008, 02:24 PM
moiraesfate

awww man, i missed it.
12-31-2008, 02:03 AM
victorsys

I missed it too.Congrats anyways. :)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 04:36 PM.

XtremeSystems