Horizontal Lian Li 343b

Printable View

Show 100 post(s) from this thread on one page

08-14-2008, 07:58 AM
Matias23

Everything U can find here.
http://www.martinsliquidlab.com/DDC3...opTesting.html
08-14-2008, 09:48 AM
leo_bsb

I had an internal leak in my DDC and after a bath of isopropyl alchool it started to work again.
Just leave in in open air to let the alchool dry and try it later
08-15-2008, 04:53 PM
Matias23

I got my new pump today and i have managed to finish my case. Will post some picures tomorrow.
08-16-2008, 02:34 PM
Matias23

Some night snaps

http://i287.photobucket.com/albums/l...5141Medium.jpg

http://i287.photobucket.com/albums/l...5143Medium.jpg

http://i287.photobucket.com/albums/l...5177Medium.jpg

http://i287.photobucket.com/albums/l...5185Medium.jpg

http://i287.photobucket.com/albums/l...5191Medium.jpg

I hope the weather will be nice tomorrow so will take some more shoots with daylight.
08-16-2008, 03:14 PM
MomijiTMO

The night shots are great. Hopefully with the top on, the UV stuff is more reactive.
08-16-2008, 03:25 PM
elite.ire

awesome job m8, its looking great, i cant w8 for more ;D
08-16-2008, 04:29 PM
Rise

awesome build, great work.
08-17-2008, 12:42 AM
disruptfam

nice pics looks great!
08-17-2008, 03:58 AM
Matias23

Some photos
N-JOY!

http://i287.photobucket.com/albums/l...5291Medium.jpg

http://i287.photobucket.com/albums/l...5286Medium.jpg

http://i287.photobucket.com/albums/l...5207Medium.jpg

http://i287.photobucket.com/albums/l...5201Medium.jpg

http://i287.photobucket.com/albums/l...5210Medium.jpg

http://i287.photobucket.com/albums/l...5213Medium.jpg

http://i287.photobucket.com/albums/l...5217Medium.jpg

http://i287.photobucket.com/albums/l...5220Medium.jpg

http://i287.photobucket.com/albums/l...5225Medium.jpg

http://i287.photobucket.com/albums/l...5230Medium.jpg

http://i287.photobucket.com/albums/l...5236Medium.jpg

http://i287.photobucket.com/albums/l...5241Medium.jpg

http://i287.photobucket.com/albums/l...5242Medium.jpg

http://i287.photobucket.com/albums/l...5249Medium.jpg

http://i287.photobucket.com/albums/l...5253Medium.jpg

http://i287.photobucket.com/albums/l...5277Medium.jpg

http://i287.photobucket.com/albums/l...5281Medium.jpg

http://i287.photobucket.com/albums/l...5283Medium.jpg

http://i287.photobucket.com/albums/l...5292Medium.jpg

http://i287.photobucket.com/albums/l...5288Medium.jpg

Will take some more pictures later hope U like IT
08-17-2008, 04:47 AM
MomijiTMO

Well I do. It's almost done. :D
08-17-2008, 06:20 AM
Uppy

wow :eek: thats my Dream Case i like it
08-17-2008, 06:49 AM
drbhatti

looking very very good - im beginning to think i need to do something to color my internals black too!
08-17-2008, 07:07 AM
Matias23

Thanks for comment I will try to take better pictures later on.
08-17-2008, 07:57 AM
cobra_kai

Wow very clean loops- you use very little tubing! Looks great
08-17-2008, 08:12 AM
Matias23

there is only 85cm of tubing for 2 loops
08-17-2008, 08:39 AM
Rise

are you planning on leaving the case open? or will you be putting panels to cover it?
08-17-2008, 08:44 AM
OdinEidolon

really that is an incredible mod!. you completely reworked out the case! Good job!
08-17-2008, 09:07 AM
illidan

so beautifull!!
08-17-2008, 10:40 AM
Matias23

Quote:

Originally Posted by Rise

are you planning on leaving the case open? or will you be putting panels to cover it?

The case will be closed, I will have all panels back.

Thanks for comments!!!!!!!!!!!!!!!!!
08-17-2008, 11:19 AM
Tile

I like it. The waterloops setup is the cleanest I saw here.
08-17-2008, 12:07 PM
*Alex*

wow dude that is awsome and so clean :up: love it :clap:
08-17-2008, 12:54 PM
Mick64

What a craftsman! :clap: Fantastic attention to detail! :up:
08-17-2008, 12:59 PM
Rise

man I keep looking at this build... I love the rad/res/pump setup :) looks badass!
08-17-2008, 01:14 PM
just a noob

I like the fact that the black sleeved cables blend in with the rest of the case, I think that gives it an even cleaner look, great job
08-17-2008, 02:04 PM
Pellepel

nice and clean good job :up:
08-17-2008, 04:46 PM
twwen2

Wow looks sweet! I'm not sure what i think of the orange(?) fluid, but the case and hardware sure is impressive!

Good job :cool:
08-17-2008, 06:10 PM
aspire.comptech

Would be perfect if the orange loop was also green.

Are you going to do something with the front of the case where the rads are?
08-18-2008, 03:01 AM
Matias23

I might change to green or yellow but for now i will keep orange
08-22-2008, 09:32 PM
.Logic

Fantastic work :up: Looks stunning.

Personally, I like the orange (the green is a bit of a let down if anything, not 'acid' enough in my opinion)

If there is just one thing I can critique, it would have to be the use of the AC ryan fans. They are just too bright for this build and (again, in my opinion) it would look much better with some black yate loons, especially considering all the time you have spent sleeving ALL of the cables black. Apart from the that, a very nice build.

MY FAVOURITE ON XS :clap:
08-22-2008, 10:09 PM
Matias23

Thanks for comment
I was thinking about NANOXIA fans they look so great but for now i will stick with AC ryan fans.
09-17-2008, 10:14 AM
Matias23

I have been playing with my camera.

http://i287.photobucket.com/albums/l...75246Large.jpg

http://i287.photobucket.com/albums/l...75272Large.jpg

http://i287.photobucket.com/albums/l...75260Large.jpg

http://i287.photobucket.com/albums/l...75253Large.jpg

http://i287.photobucket.com/albums/l...65202Large.jpg

Thanks
09-17-2008, 11:48 AM
Arni

:up:
10-07-2008, 09:04 PM
FrostyPanda

where are the optical drives?
10-20-2008, 05:43 AM
Youth

:up: Hugely impressive build..

Where did you get that Powder coating done? Looks like a very nice job..
10-20-2008, 11:27 PM
Matias23

Quote:

Originally Posted by FrostyPanda

where are the optical drives?

External

Quote:

Originally Posted by Youth

:up: Hugely impressive build..

Where did you get that Powder coating done? Looks like a very nice job..

In Horsham UK

Quote:

Originally Posted by mcoffey

Absolutley spectacular:clap: Has to be one of the most well thought out and executed builds I've ever seen. So many innovative ideas. I'm just amazed at the quality and attention to detail.

Thanks for taking the time to post the worklog.:up:

Corgrats again on a unique showcase build:clap::clap:

andyc

Thanks Andy
10-21-2008, 02:24 AM
0xdeadbeef

Matias, how did the bleeding go with your coolplex/ek reservoir? I've done bleeding with same combo but with the 100 mm res tube. Thinking of going to 60 mm tube like yours.
10-21-2008, 03:59 AM
Matias23

Quote:

Originally Posted by 0xdeadbeef

Matias, how did the bleeding go with your coolplex/ek reservoir? I've done bleeding with same combo but with the 100 mm res tube. Thinking of going to 60 mm tube like yours.

Bleeding went well i just left system running 2 days non stop and after that there was no more air in the system.
CPU Idle water temp is 24 load 26
GPU Idle water temp is 25 load 27
Ambient temp 21
10-21-2008, 02:35 PM
RADCOM

Matias23 you have done yourself proud, the man who put the "S" in sleeving:up: We have very similar components but you have modded your case more. I haven't finished mine but it pales into significance with what you've done. Where did you get the BP flow sensors? I need more stuff lol Excellent temps, is your house cold or do you live on the Downs lol
10-21-2008, 10:41 PM
Matias23

Quote:

Originally Posted by RADCOM

Matias23 you have done yourself proud, the man who put the "S" in sleeving:up: We have very similar components but you have modded your case more. I haven't finished mine but it pales into significance with what you've done. Where did you get the BP flow sensors? I need more stuff lol Excellent temps, is your house cold or do you live on the Downs lol

Thanks.
I can't wait to see Your case finished
House is quite cold but i prefered this way at least my water temp is low hehehe.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 04:19 PM.

XtremeSystems