dynamiks,
You did a great job with that case man! :thumbsup:
Also you take good pics!
Printable View
dynamiks,
You did a great job with that case man! :thumbsup:
Also you take good pics!
dynamics, just beautiful !!!
ok, might as well.
http://www.agitated.net/albums/album...1040.sized.jpg
http://www.agitated.net/albums/album...1038.sized.jpg
here's all my case pics. here's the specs.
i bought most of it in august and the case+goodies in december. i tried to hide the cathodes so you can't see them, only the light from them. i used some electrical tape to "direct" the light a lil better.
--slly
Hope you like these. Was a fun build so far.
http://www.dfi-street.com/forum/show...0&postcount=78
Quote:
Originally Posted by dynamiks
That blue neon behind front filters looks awesome! :toast:
Here's my case :p:
Some say I have the best wire management.
My Case
Hey all :)
HP-Resurrection II Evolution.
http://mir.bitstripped.net/albums/al...1869.sized.jpg
http://mir.bitstripped.net/albums/al...1849.sized.jpg
http://mir.bitstripped.net/albums/al...1867.sized.jpg
http://mir.bitstripped.net/albums/al...1872.sized.jpg
See more here with LCD side panel mod
http://pcdb.overclockers.com.au/view...lion&page=pics
and here for a full work log
http://www.casemodgod.com/forums/viewtopic.php?t=2125
Damn nice case . I like the tubing, wireing etc :up: :slobber:
Quote:
Originally Posted by TheDude
Might I ad
Cool hardware aswell :)
Defyant thats some really nice work you did with that case:slobber:
What did you use for all the sculpting? bondo?
thanks everyone for the compliments. I will be working on the case some more, and got a few extra modifications i'll be doing. I'll be sure to post more pics in the future when I'm done with everything.
My Lian Li PC-75B case.
Its brand new, and I havent modded it that much yet, but here it is:
http://lianli.knallert-tuning.dk/ind...name&order=asc
Defyant, That is hella pimp. Very, very impressive. :toast:
you may have the best wire management but what gives with the 3/8" tubing through the main part of your water loop? Look anorexicQuote:
Originally Posted by MasteR
N this is my little rig :
http://photos.friendster.com/photos/...244921705l.jpg
Yipes look at that Rats nest on the back though!! :eek: Of course the inside is gonna look good if you run all the wires in back. Good looking case otherwise.Quote:
Originally Posted by MasteR
http://www.daredevil.nildram.co.uk/pics/compwc.jpg
Heres mine, just recently posted it over at the liquid cooling section. Though after seeing a thread on here with certain ideas in, i maybe changing this :)
Add some color ;)Quote:
Originally Posted by RAndomaN
Mine:
http://img216.exs.cx/img216/1931/case87un.th.jpg
Tagan psu so lots of wires, where did they go?!
Here:
http://img147.exs.cx/img147/9936/case92az.th.jpg
yet another stacker to add to the collection on this thread! somehow i managed to fill this one up tho, it's such a HUGE case!
theres a thermochill 120.3 cut into the bottom with 6 fans on it and a black ice pro on the back!
the bays used from top down are: res, DVD - RW, CD - RW (stealthed), floppy, HDD, then the pump under all that, soon to be added is a musketeer 2 and a second HDD!
this is my second watercooling project, and i'm happy with it, temps of around 28 can't be grumbled with (CPU is a xp m 2500+ at 2.5 at 1.93V)
(sorry for the rusbish pics, were taken with my phone)
Enjoy :D
http://img.photobucket.com/albums/v2...Picture604.jpg
http://img.photobucket.com/albums/v2...Picture592.jpg
http://img.photobucket.com/albums/v2...Picture616.jpg
http://img.photobucket.com/albums/v2...Picture613.jpg
and heres temps and stuff
http://img.photobucket.com/albums/v2...02_03_05_b.jpg
just made a new one....just a BETA....need a little bigger suitcase for it. but still a very cheap case...made for less than 20$
pics of my new LANCase
cool
really a CASE :P
u can carry to lanparty easily
lol
Very nice work on that case dynamiks!
dynamiks-- very nice case and extremely nice photos!
@unreal-- A+ cable management job :D very, very nice... glad to see there is room behind the PC7 board tray for cables :)
This is my rig http://putfile.com/pic.php?pic=3/7016282918.jpg&s=x2
nothin that fanct but it works
:) well except for multiple colour fans, it quite stilish ....simple often does it.
My rig
We want to see the inside too ;)
Alright heres my rig..tell me what you think about it...
The case is a CoolerMaster Black Praetorian case
well not much of modding, but cables put nicely aside...could use some sleeving and a little UV light (sry just love those effects :)
i did do sleeving, i just sleeved that vga wire on my 6800
Love the case, but it would me nice to see the inside ;)Quote:
Originally Posted by Aries64
my new case
This is my pc:
sorry, not the best quality pictures in the world, but it was done with a old camera.
http://img.photobucket.com/albums/v513/Trifid/pc1.jpg
http://img.photobucket.com/albums/v513/Trifid/pc2.jpg
http://img.photobucket.com/albums/v513/Trifid/pc3.jpg
http://img254.echo.cx/img254/5043/ugurutemp310mr.jpg
mine :)
where did you get your case from ?Quote:
Originally Posted by calcal
im after a Black CM Praetorian w/ a window...
Here's my addition to the gallery...
PC --
http://www.xtremesystems.org/forums/...id=27625&stc=1
and my PC just before I got the 6800GT and red led molex Y-cables... the 6800 was so big I had to rob the drive cage from another pc, turn it upside down and put the drives for my second stripe-set (of the mirror'd disks) in that down below... on the bottom of the case. It worked out really nicely, but here's how it looked before... the card is a 9700Pro with ramsinks on it.
http://www.xtremesystems.org/forums/...id=27627&stc=1
and the rest -- (sorry kind of dark)
http://www.xtremesystems.org/forums/...id=27626&stc=1
my case.
regards.
http://premium1.uploadit.org/Marvin//P1010067.JPG
could just as well post my case here
actually more a project log, isn't finnished at all, lots of work to do
http://forum.tweakzone.nl/topic/41167
it's in dutch, but why read text if you can watch pictures ;)
http://www.ocia.net/playafly187/wknightmare.jpg
http://www.ocia.net/playafly187/wknightmare1.jpg
http://www.ocia.net/playafly187/wknightmare2.jpg
AMD Athlon 64 (939) 3000+ @ 2,300 MHz (8.5 x 265 1:1), 2x 512 MB OCZ EL Platinum PC-4200 DDR, MSI K8N Neo2 Platinum, GeForce 6800 (unlocked / overclocked to 355 / 830) w/ Arctic Cooling NV Silencer 5, Western Digital 74 GB Raptor 10,000 SATA, 550w Aspire Chameleon PSU, CoolerMaster Praetorian Case, 8X Lite-On DVD Burner
ill post some of my pc pics tonight.
Some pix of my main rig.
i'll try get some more pix later ...file sizes are too big.
My latest Lian Li (V1000B) system:
http://mywebpages.comcast.net/ozziegn1/lianli8.jpg
http://mywebpages.comcast.net/ozziegn1/lian_li9.jpg
Nice cases guys.
Keep 'm comming.
here are a few shots of my ever changing desk area and my new SLI rig... those are 6800GTs in there... all MSI (mobo, vid cards)
http://www.xtremesystems.org/forums/...id=28825&stc=1
I have to clean up the cable routing... the X-connect cables are _tough_ to manage because they are thick and not too flexible... I just got this machine built today, so I think it's looking pretty good so far... there is potential for greatness. heh :)
Here's my desk setup as it stands now...
http://www.xtremesystems.org/forums/...id=28826&stc=1
Yeah, your cabling definately needs cleaning up a bit! Well, I can't really say much since my cables used to be in a bundle sitting in the middle of my case. :O
yeah -- I am going to re-cable when I get my X-connect 24pin cable.. I am using an adapter now... *sigh*
here are some pics of my rig
http://img218.echo.cx/img218/295/img22563ll5dl.jpg
http://img218.echo.cx/img218/3789/img22613xi9xk.jpg
http://img218.echo.cx/img218/3773/img22627ji0uf.jpg
http://img218.echo.cx/img218/391/img22635fp1wy.jpg
http://img218.echo.cx/img218/7918/img22686qr1fk.jpg
http://img218.echo.cx/img218/3364/img22699dt2vz.jpg
http://img218.echo.cx/img218/7406/img22710fn5li.jpg
IMO That is the nicest looking case out there, if only it had 120mm fans.
BTW what radiator grill is that?
it is the aquaextreme dual rad grill
http://i4.photobucket.com/albums/y132/Magnj/Parts.jpg
http://i4.photobucket.com/albums/y13...j/Together.jpg
http://i4.photobucket.com/albums/y132/Magnj/OCZ.jpg
http://i4.photobucket.com/albums/y13...VGAandCHIP.jpg
http://i4.photobucket.com/albums/y132/Magnj/blue.jpg
http://i4.photobucket.com/albums/y13...shelikesit.jpg
Wish my setup was as neat as yours revenant :P
Nice setup Magnj!! Mine will be very similar!!
BTW how does it run HL2 and Doom 3??
its just a water cooled case. two water systems in one.
https://home.comcast.net/~msbmeaner/...mycomp.jpg.jpg
Quote:
Originally Posted by MsB
Orange =) Looks nice!
Thanks :)Quote:
Originally Posted by Vandi423
Magnj, same Antec case as me. That Powerstream fits no way in hell, Iøm going for something bigger.
This is all before I watercooled it. Now water does NOT fit that case.
Why does he have the 4pin connector in there?
Isnt that only for SLI?
Does it help OCing to feed one GPU with the extra 4pin cable?
Any other things you may know, please share :D
Turok
who cares just give it some power :)
got some new pics with my new digicam....
http://www.blah.lir.dk/hosting/fragman/Kuffert1½.JPG
http://www.blah.lir.dk/hosting/fragman/Kuffert2½.JPG
please resize pictures took 2 minutes to load over cable.
Thanks =)
Don't know about doom, but HL2 is very very nice. All highest settings. I put in that power cord because I htought I needed to. I may remove it when i redo the inside of my case, but i've decided to stop toucing stuff untill I get more time and money.
Wow, that is a Sweet looking Case. Just giving me more, and more Ideas of what I can do with my Dragon Full-Tower. :woot:Quote:
Originally Posted by 1337mr.hanky
sry done :) ...get a deasent broadband conn ;)Quote:
Originally Posted by =[PULSAR]=
Not much to see here, but hey :p: :
http://www.mismatchrats.com/crap/boxes.jpg
http://www.mismatchrats.com/crap/build.jpg
http://www.mismatchrats.com/crap/computer.jpg
^ where's your in-game screenshot? :rolleyes:
niece lian klii
my lian li mod:
http://patrickclouds.cybton.com/modd...li/lianli8.jpg
http://patrickclouds.cybton.com/modd...li/lianli4.jpg
http://patrickclouds.cybton.com/modd...li/lianli5.jpg
http://patrickclouds.cybton.com/modd...li/lianli9.jpg
http://patrickclouds.cybton.com/modd...i/lianli11.jpg
http://patrickclouds.cybton.com/modd...i/lianli12.jpg
http://patrickclouds.cybton.com/modd...i/lianli24.jpg
http://patrickclouds.cybton.com/modd...i/lianli25.jpg
blue makes me happy :toast:
Beautiful :)
You have some serious wiring going on in there.
nice blue light....
but .. .wire management ?
you don´t see the wires :banana: :banana: :banana:
but it´s necessary for all the little led´s
take a look http://patrickclouds.cybton.com/modd...i/vu-meter.wmv and enjoy this movie
My rig, and yes I know the molex and fdd wires are not connected, and some of the pictures were taken befor case moding so you might notice some differances
http://img.photobucket.com/albums/v4...Picture375.jpg
http://img.photobucket.com/albums/v4...Picture378.jpg
http://img.photobucket.com/albums/v4...Picture377.jpg
[IMG]http://img.photobucket.com/albums/v446/waddup858/Picture376.jpg
[/IMG]
http://img.photobucket.com/albums/v4...8/DSC00104.jpg
http://img.photobucket.com/albums/v4...8/DSC00102.jpg
Patrickclouds
, where did you get the other case with dusk on it!?
that´s a shuttle xpc SN45G.Quote:
Originally Posted by HawainPanda
the cover in the "dusk&dwan edition" is an acessoiry you can get from your dealer.
i bought it in germany
here
Just finished building it:
http://img137.echo.cx/img137/5637/img3182b8fz.jpg
Here's a dark shot:
http://img137.echo.cx/img137/3623/img3294b4eo.jpg
I'm still not happy with all the wires :(
http://img137.echo.cx/img137/2544/img3235b7in.jpg
Does anyone know how I could hide the wires? I've tried using rounded cables but they're awfully stiff and I can't fit them anywhere :(
Got a dremel?
Unfortunately, the closest thing I have to a dremel would probably be a small drill :(Quote:
Originally Posted by waddupmm
How can I wire my leds to a CC sensor to do that? :slobber:Quote:
Originally Posted by Patrickclouds
Any tutorials on how to make it?
http://www.habrown.com/pictures/xaliena64together.jpg
Thats an older picture, from when I first assembled it, i might take some more tommorow.
My "xtreme" cable management :D
http://img298.echo.cx/img298/7162/p101000237ao.jpg
Decided as a few of you may know decided to leave the water cooling
anyway, in the meantime iv gone back to air inside a different case, new tft and a few other things
specs now:
cm110 with panaflow L1's
XP90c cooler with 92mm panaflow L1
3000 venice
DFI ultra D
1gb gskill LE
x800xt with arctic cooler
74gb raptor
160gb WD storage
OCZ 520
Samsung 913N tft (awesome gaming panel, who can complain at £215inc)
running my former fan controllers internally due to the door on the case having no clearance
http://img.photobucket.com/albums/v2...Picture008.jpg
http://img.photobucket.com/albums/v2...Picture010.jpg
http://img.photobucket.com/albums/v2...Picture013.jpg
Oh and my setup atm showing the backup pc (2.4 celeron D, 80gb WD, 512mb 3200, gf2, antec 430, antec 1080 case :D) and now spare vp171s tft
http://img.photobucket.com/albums/v2...y/IMG_1125.jpg
Hello,
I'd like to show you my setup:
- A64 Venice 3800+ @2640MHz (220MHz FSB)
- Asus A8N SLi Deluxe
- Crucial Ballistix PC3200 @ 220MHz 2-2-2-8 1T Timings 1:1
- Club 3D X850XT @Default cooled by TR V1 Heatpipe Cooler
- Audigy2 ZS
- BeQuiet! 470W
- Lian Li V1000
Pictures:
http://home.arcor.de/skywalker_oasis/Geh%e4use.jpg
http://home.arcor.de/skywalker_oasis/graka1.jpg
http://home.arcor.de/skywalker_oasis/graka2.jpg
Okay more pictures are cooming soon.
OMFG I need one where did you find the TR V1???
Well we have a shop here in germany where you can buy it.
Take a look here:
click
OMG..lovely TR V1 :slobber:
I 2nd dat!!!!!!Whaaaat a beauty :D :slobber:Quote:
Originally Posted by PowerSlide
My mod, Full Metal Alchemist (not done yet :P)
http://images.dr3vil.com/uploads/mmlfront.JPG
http://images.dr3vil.com/uploads/mmlside.JPG
http://www.alienhax.us/uploads/darkangle.JPG
Need a camera stand for the dark pics...
Thats nice man, I like how you kept it nice and clean, but I would like to see in the case. I guess someday I'll get around to posting my case.
Wow, have a worklog or more pics?Quote:
Originally Posted by Patrickclouds
Quote:
Originally Posted by GraveyardPC
sweet man, almost makes me wanna buy a 2nd monitor as well.