POST YOUR E6850 with OC PERFORMANCE

Printable View

Show 100 post(s) from this thread on one page

08-10-2007, 04:41 PM
stephen23

Just a quick test on 3.2G, 3.6G and 4G on prime95

My rig:
CPU:E6850 L722A232
M/B:Asus P5K-Deluxe
CPU Cooler:Ultra 120 eXtreme with thermaltake A1926 fan
RAM:Crucial Ballistix DDR2-1066 5-5-5-15 1G X2
VGA:Asus 2600XT DDR3
POWER:Enermax Liberty 500W
CASE:Thermaltake Armor Jr.

3.2G Start
http://i95.photobucket.com/albums/l1...primeLarge.jpg

3.2G finished
http://i95.photobucket.com/albums/l1...inishLarge.jpg

3.6G start
http://i95.photobucket.com/albums/l1...primeLarge.jpg

3.6G finished
http://i95.photobucket.com/albums/l1...primeLarge.jpg

4G start
http://i95.photobucket.com/albums/l1...primeLarge.jpg

4G finished
http://i95.photobucket.com/albums/l1...hrfinished.jpg
08-10-2007, 09:09 PM
bro20000

You need to torture test them alot longer than a hour say 5 to 24 hours!
08-10-2007, 11:58 PM
Garrett

That's true bro20000, but an hour of stress is already a very good indication ;)
And Stephen23, you should add 15c to those temps right?

Mine says 21 idle lol... the air coming out of the PA120.3 is 26c... :rofl:

Currently Orthos running @ 3.6ghz @ 1.328v load voltage (1.360 idle, 1.40 set in bios, stupid GA-P35-DS3 vdropping vdrooping board :down: )
08-11-2007, 12:15 AM
jugeen

I downgraded back to two cores. Orthos runing 9*430 @ CPU 1,4625V @ PLL 1.6V @ NB 1.4V @ FSB 1.5V and after one hour my PC is randomly restarting. what the problem can be? any idea? thx!
08-11-2007, 12:26 AM
stephen23

Quote:

Originally Posted by bro20000

You need to torture test them alot longer than a hour say 5 to 24 hours!

thx for your advice!!!
I might do it later.
08-11-2007, 12:28 AM
stephen23

Quote:

Originally Posted by Garrett

That's true bro20000, but an hour of stress is already a very good indication ;)
And Stephen23, you should add 15c to those temps right?

Mine says 21 idle lol... the air coming out of the PA120.3 is 26c... :rofl:

Currently Orthos running @ 3.6ghz @ 1.328v load voltage (1.360 idle, 1.40 set in bios, stupid GA-P35-DS3 vdropping vdrooping board :down: )

at least 15 degrees......................even on Intel TAT.
08-11-2007, 03:36 AM
Infa

i think its the idle temps thats have to be addes 15c not the load temp for some reason.... would really be nice of an update of coretemp :)
08-11-2007, 03:37 AM
Teccxpert

I see lots of users with E6850 benching around 4Ghz on XP, how does the overclocking sit on Vista?
08-11-2007, 04:50 AM
jugeen

Quote:

Originally Posted by Infa

i think its the idle temps thats have to be addes 15c not the load temp for some reason.... would really be nice of an update of coretemp :)

what are your voltages for 4.2GHz?
08-11-2007, 05:15 AM
Severance

1 Attachment(s)

On my p5k deluxe i think Ai suite is correct temp you can see tat is way off. My cpu needed 1.58v to be stable here a week ago and now needs 1.6v in only a week so im sure that these high volts we are pumping into these things will kill them fast. these are idle temps. full load suite reads 53c and tat 40c. Im using water chilled to 12c.
08-11-2007, 05:39 AM
bro20000

Had say ai suite right! Try rightmark cpu clock utility that gives right temps out!
08-11-2007, 06:03 AM
Locust

Finaly got some time to test this baby. Been sitting in the box for 2 weeks ;)
E6850 L22A*
P5K3 Dlx

Auto Vcore. Shows at 1.464v - Also tested @ 4.06 9x450 1.55v but not using Orthos or Prime, so not going to post that till proven stable.

http://www.freak3d.com/clock/FSB470-...0vcoreAuto.jpg
08-11-2007, 06:45 AM
giorgos th.

you can try running 2 instances of pi 32m at 4.06 - 1.55V if you dot want to use orthos for the moment..
08-11-2007, 06:55 AM
Locust

Quote:

Originally Posted by giorgos th.

you can try running 2 instances of pi 32m at 4.06 - 1.55V if you dot want to use orthos for the moment..

I was mostly testing memory performance for now and only ran some Dual instance of Prime overnight at the above posted settings.
I will do more testing over the weekend.
08-11-2007, 07:06 AM
stephen23

Quote:

Originally Posted by Locust

Finaly got some time to test this baby. Been sitting in the box for 2 weeks ;)
E6850 L22A*
P5K3 Dlx

Auto Vcore. Shows at 1.464v - Also tested @ 4.06 9x450 1.55v but not using Orthos or Prime, so not going to post that till proven stable.

http://www.freak3d.com/clock/FSB470-...0vcoreAuto.jpg

1.55V can run 2 32M Super pi simutaneously for my 6850, but not on orthos and prime95
08-11-2007, 08:39 AM
Infa

Quote:

Originally Posted by Teccxpert

I see lots of users with E6850 benching around 4Ghz on XP, how does the overclocking sit on Vista?

Its working perfect in Vista for me atleast, never had any problem with it, the only bad thing i can think of is Super Pi is getting some slower results. Otherwise its working flawlessly, got it to 4.320Ghz.

Quote:

Originally Posted by jugeen

what are your voltages for 4.2GHz?

For my 4.2 i have to use 1.70 aprox, its not stable anyway so i can use 1.65-1.67 for it to, it crashes when i play games or so. just have to get it cooler, but i cant couse of the weather, 27c amb. here and really moisty.
08-11-2007, 08:42 AM
michaLcoughliN

Quote:

Originally Posted by Garrett

That's true bro20000, but an hour of stress is already a very good indication ;)

not true at all unfortunately. When I was overclocking my E6850, It failed a few times around the 2 hour mark. then at 2 hour 30 min.

Then i bumped Vcore upto 1.525 and passed for 10+ hours through orthos.

So in conclusion your theory is wrong about "after an hour is a very good indication"
08-12-2007, 06:18 PM
adambomb13

Update: I finally got stable at 4.06Ghz with everything at AUTO (default) except

vCore 1.4 and North Bridge at 1.20v

So thank you for all your help. But I really really think I have more to go because my CPU is in the negatives celcuis (sp.)

So if anyone is experienced with the Asus Striker Extreme and E6850, please pretty please i need your feedback.

I just cant belive I hit the ceiling on this setup.

Adam
08-13-2007, 07:22 AM
Infa

Ok, now i've pushed my cpu to its Maximum atleast with Summer temps around and so on, so i will compile some info, think that it will be more informative. :)

Processor: E6850
Stepping: SLA9U , L722A186 REV G0
Orginal MHz: 3.0ghz
OC MHz: 4.369Ghz (4.1 stable)
FSB: 485 (457)
Mutipel: 9
Orginal Vcore: 1.35v
CPU Vcore: 1.76v (1.66)
vMCH: 1.45
SB: 1.55
Vdimm: 2.175
Cooling: Watercooling in sign.
Coolingpaste: Arctic Silver 5
Motherboard: Asus Commando bios ver 1404
Minnen: 2GB Corsair TwinX 6400 CL5
Max suicide Validation 4369Mhz: http://valid.x86-secret.com/show_oc.php?id=228854

Valid 4.1 länk: http://valid.x86-secret.com/show_oc.php?id=227831
08-13-2007, 08:21 AM
Locust

Quote:

Originally Posted by Infa

Processor: E6850
Stepping: SLA9U , L722A186 REV G0
Orginal MHz: 3.0ghz
OC MHz: 4.369Ghz (4.1 stable)
FSB: 485 (457)
Mutipel: 9
Orginal Vcore: 1.35v
CPU Vcore: 1.76v (1.66)
vMCH: 1.45
SB: 1.55
Vdimm: 2.175
Cooling: Watercooling in sign.
Coolingpaste: Arctic Silver 5
Motherboard: Asus Commando bios ver 1404
Minnen: 2GB Corsair TwinX 6400 CL5
Max suicide Validation 4369Mhz: http://valid.x86-secret.com/show_oc.php?id=228854

Valid 4.1 länk: http://valid.x86-secret.com/show_oc.php?id=227831

Nice clocks! But that voltage would scare me! ;)
08-13-2007, 09:29 AM
Infa

Thanks! :) Im really getting the thing of the OC, been doin it less than a year,but i have always been computer freak :)

i will get Coolab Liquid pro tomorrow, maybe i will get higher clocks! with what i hope will be around 5c lower! we'll see :) i will update if anything changes!

that vcore is only for max clock :) it is really high and my watercooling cant keep up with it, around 45 idle, and 55c just in super pi :) but 1.66 is all ok, around 30c idle and under 60c load with new prime95.3.

Regards!
08-13-2007, 06:01 PM
hlonipha

Quote:

Originally Posted by michaLcoughliN

not true at all unfortunately. When I was overclocking my E6850, It failed a few times around the 2 hour mark. then at 2 hour 30 min.

Then i bumped Vcore upto 1.525 and passed for 10+ hours through orthos.

So in conclusion your theory is wrong about "after an hour is a very good indication"

amen:eek:
08-13-2007, 06:39 PM
shimmishim

L719B 6850

validation at 4338 on water

amazing... simply amazing...
08-13-2007, 07:03 PM
scwam

Quote:

Originally Posted by shimmishim

L719B 6850

validation at 4338 on water

amazing... simply amazing...

I've got the same chip (L719B014, what your last numbers). What vcore are you doing that in bios?
08-13-2007, 07:31 PM
shimmishim

Quote:

Originally Posted by scwam

I've got the same chip (L719B014, what your last numbers). What vcore are you doing that in bios?

L719B095 :D

that was around 1.6575 bios
08-13-2007, 07:58 PM
doakh

How does one pick and choose which cpu 'lot' or 'week' they get? Is their someone special to order from?

HAPPY MOTORING
08-14-2007, 05:30 AM
burn what?

another 1 at 3.8 on air :up:

http://img261.imageshack.us/img261/3...ultszz3.th.jpg
08-14-2007, 07:57 AM
AndyM

Wow, this chip is great!

http://i80.photobucket.com/albums/j1...2_32M_crop.jpg

Oh, this is the 6850 thread? Ooops :rofl: . It's hard to decide if I should try one, I want Orthos stable @ 4Ghz without getting too high in the parabolic portion of the voltage curve. Keep the OC's coming...preferrably with Orthos 8hrs+ screenies :up:
08-14-2007, 08:19 AM
DerekT

Quote:

Originally Posted by AndyM

Keep the OC's coming...preferrably with Orthos 8hrs+ screenies :up:

I fail to see your Orthos 8hrs+ screenie even though you posted your E6600 in the wrong thread. You are on water with that E6600 are you not? Let's see you get 4.0 on air with that chip. :P

There are more than a few getting 3.8 and 4.0 on air with the 6850's though. ;)
08-14-2007, 09:28 AM
stephen23

Quote:

Originally Posted by AndyM

Wow, this chip is great!

http://i80.photobucket.com/albums/j1...2_32M_crop.jpg

Oh, this is the 6850 thread? Ooops :rofl: . It's hard to decide if I should try one, I want Orthos stable @ 4Ghz without getting too high in the parabolic portion of the voltage curve. Keep the OC's coming...preferrably with Orthos 8hrs+ screenies :up:

is hard to bench a non-G0 stepping CPU at 1.6Vcore on air..........!
08-14-2007, 10:31 AM
michaLcoughliN

all i can say is with raised vcore it sets off a lot of heat in my room lol.
08-14-2007, 12:49 PM
AndyM

My chip on air @ 4GHz? I'd have to call the fire department beforehand. :p:

I cant get Orthos stable beyond 3.85 and I'm not willing to exceed 1.65 vcore/bios to try, but I can make some killer screenshots of 4.1 and 4.2, lol. I just cant decide whether to take the 6850 plunge or wait for 45nm. Oh well, I'll stop clogging up this thread with useless stuff, just wanted to say that SuperPi stable kinda overstates just how fast the chip 'really' is should stability be a concern.
08-14-2007, 01:51 PM
rge

2 Attachment(s)

I think the sweet spot on air or water for my E6850 is 3.8 to 3.9, which avoids high voltages. Depite small performance difference (imo) between 3.83 and 4, like everyone else I had to take a few runs at 4, but never passed more than 1 hour of orthos custom (set at 8-64k) or 6 hours of small ffts (8k).

I am orthos stable at 3.9Ghz with 1.475 Vcore Bios, 1.44measured Vcore, no other voltage changes. But cpu temps were 64C (ignoring coretemps 56C).

I opted for 3.83, I am orthos stable at 10hrs large fft, 18 hrs blend, 8 hours custom (8-64 ffts), (dont like orthos small ffts of 8k only, needs to be updated)

Here is my 3.83 24/7 at reasonable volts/temps of 1.4375 bios, 1.41 measured. And below my 4.0 which was not stable up to 1.55, did not try above that.
08-14-2007, 06:02 PM
AndyM

rge, that is one nice chip you have there for sure!
08-14-2007, 07:22 PM
funkflix

L719B016

http://www.gravedigga.de/gravedigga/....30h_small.jpg

http://www.gravedigga.de/gravedigga/....30h_small.jpg

Can run all Benches (3DMarks, 32M etc.) with 4203MHz 1,63V.
08-14-2007, 09:06 PM
learners permit

^^Nice speed vs voltage and your temps are going well. So far I'm@ 3.7 1.33V. Idle temp is 26C. Gonna wait for cooler weather to push the voltage as this core seems to dislike anything above 48C. fully loaded. I unfortunately cannot afford to torch a cpu so I do what I can with minimal volts. So far this G0 core can do what I was hoping for and I'm very happy with it.
08-14-2007, 11:26 PM
scwam

This is on air: L719B014
http://i75.photobucket.com/albums/i3...6stability.jpg

Water is about somewhere between 4040 to 4090

Air again:

http://i75.photobucket.com/albums/i3...m/ultimate.jpg
08-15-2007, 09:32 AM
ante_ante

BX80557E6850 SLA9U
MM #: 891188
FP0# L722A186

This is my best today on my SS. Something is stopping me, mobo or cpu.

http://img132.imageshack.us/img132/7...nch6ke8.th.jpg

And max FSB
http://valid.x86-secret.com/show_oc.php?id=229611
08-16-2007, 01:15 AM
bro20000

Nice results scwam got mine to same just need better cooling!
08-20-2007, 05:28 AM
o polonos

Hello im new in forum :D
This is my E6850

4652Mhz with ~1.63v with DICE on Asus P5K-E

http://img239.imageshack.us/img239/7917/1myw3.jpg

http://img155.imageshack.us/img155/410/pifamk5.jpg

And here 3600Mhz with 1.38v 24/7 stable ;) on Abit IP35 PRO with H2o

http://img125.imageshack.us/img125/8257/orthos17rd9.jpg
08-20-2007, 07:28 AM
OnDborder

o polonos, do you know what batch yours is?
08-20-2007, 08:02 AM
Hazzan

@o polonos : Welcome to XS...nice your first post....btw can you show us Bacth your chip ?
08-21-2007, 10:34 AM
eva2000
Caved into temptation and grabbed myself my first E6850 cpu - L723A347 with 7/27/07 pack date which is same batch used for 9x618FSB http://www.xtremesystems.org/forums/...d.php?t=155402 :)

E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07

System
- Intel Core 2 Duo E6850 L723A347
- Corsair Nautilus 500 3/8" ID
- Asus Blitz Formula 1101 bios
- 128MB Gainward FX5200 PCI
- 2x1GB Crucial Ballistix Tracer PC2-8500 kit #2 (naked modules) in blue dimm slots
- Memory cooling = 120x25mm Spire 96cfm fan on rheobus @100% fan speed.
- 74GB WD Raptor 8MB on SATA 1 port
- Pioneer DVR-08 Burner
- Sony FDD
- 1KW PCP&C SLI psu
- WinXP Pro SP2
Shows very good promise E6850 L723A347 on Asus Blitz Formula with Corsair Nautilus 500 water so far boot right into memtest @9x437FSB = 3933Mhz at stock vcore 1.296v bios (which is manually set to 1.325v bios setting so VID = 1.325v)! But first stock cpu speeds with some undervoltage loving :)

Room temp = 24.8C to 27.5C

3006Mhz @9x333FSB at 1.225v bios set vcore = 1.192v idle/load

Idle
http://fileshosts.com/intel/Asus/Bli...ime95_idle.png

Load
http://fileshosts.com/intel/Asus/Bli...ime95_load.png

3600Mhz @9x400FSB at 1.3625v bios set vcore = 1.336v idle/1.328v load

Idle
http://fileshosts.com/intel/Asus/Bli...ime95_idle.png

Load
http://fileshosts.com/intel/Asus/Bli...ime95_load.png

4005Mhz @9x445FSB at 1.500v bios set vcore = 1.472v idle/1.464v load

Very happy indeed untweaked single 32M @4005Mhz at 1.464v load!

http://fileshosts.com/intel/Asus/Bli...2m53s203ms.png

http://fileshosts.com/intel/Asus/Bli..._validated.png
08-21-2007, 11:38 PM
jugeen

eva, n1 chip! :up:
08-22-2007, 12:03 AM
Hazzan

@eva2000 : nice you have chip EVA ...can you post 4Ghz with orthos Please !!!!!!
08-22-2007, 12:35 AM
simonmaltby

Here are my results for e6850
Will get the codes added later when i take the chip out to try my q6600

4Ghz Prime stable (sorry i'm too lazy to run prime for long) - but i have been running this for 3 days gaming and encoding without a glitch - so to me its stable :)
http://www.motormice.com/images/e6850@4000-prime.jpg

Best Speed with the volts i'm prepared to try atm...
http://www.motormice.com/images/e6850@4221.jpg
08-22-2007, 05:20 AM
kiwi

So, L723A seems to be the best so far
L722 needs more volts

Anyone has L721A? It is available at my local store :)
08-22-2007, 05:53 AM
eva2000
yeah L723A ain't bad

4374Mhz @9x486FSB at 1.750v bios set vcore = 1.712v idle/1.704v load

Not bad for Corsair Nautilus 500 water cooled I'd say :)

System
- Intel Core 2 Duo E6850 L723A347
- Corsair Nautilus 500 3/8" ID
- Asus Blitz Formula 1101 bios
- 128MB Gainward FX5200 PCI
- 2x1GB Crucial Ballistix Tracer PC2-8500 kit #2 (naked modules) in blue dimm slots
- Memory cooling = 120x25mm Spire 96cfm fan on rheobus @100% fan speed.
- 74GB WD Raptor 8MB on SATA 1 port
- Pioneer DVR-08 Burner
- Sony FDD
- 1KW PCP&C SLI psu
- WinXP Pro SP2
/numproc = 1

Room temp = 25.5C

Max CPUZ validation = 4374Mhz at 1.712v
Max 1M = 4338Mhz at 1.712v
Max 32M = 4266Mhz at 1.712v

http://fileshosts.com/intel/Asus/Bli..._validated.png

http://fileshosts.com/intel/Asus/Bli...m_11s625ms.png

http://fileshosts.com/intel/Asus/Bli...s_pcprobe2.png
08-22-2007, 06:44 AM
Lu(ky

Nice OC EVA is that last one a suicide run? at 1.71V on Vcore? I thought I read somewhere MAX was 1.6V? Here is my 1st OC no problems what so ever..

http://i.pbase.com/o6/06/629506/1/84...sstable3.6.JPG
http://i.pbase.com/o6/06/629506/1/84...Avyt.3.6oc.JPG
08-22-2007, 06:48 AM
BeardyMan

E6600 L632A400 at air
vs
E6850 L720A985 at air

The winner...
08-22-2007, 06:48 AM
eva2000

Quote:

Originally Posted by Lu(ky

Nice OC EVA is that last one a suicide run? at 1.71V on Vcore? I thought I read somewhere MAX was 1.6V? Here is my 1st OC no problems what so ever..

Max CPUZ validation = 4374Mhz at 1.712v
Max 1M = 4338Mhz at 1.712v
Max 32M = 4266Mhz at 1.712v

;)
08-22-2007, 06:58 AM
cletus_cassidy

Has anyone had any experience with the L727A898 stepping e6850? I just picked one up and I can't seem to find any information on it at all...
08-22-2007, 07:17 AM
Lu(ky

Quote:

Originally Posted by cletus_cassidy

Has anyone had any experience with the L727A898 stepping e6850? I just picked one up and I can't seem to find any information on it at all...

What are you using for the rest of your system? Mobo, Memory Etc..
08-22-2007, 09:10 AM
cletus_cassidy

Abit IP 35 Pro with 4GB Crucial Ballistix Tracer PC-1000 RAM. I haven't actually started to overclock the chip yet, but I haven't seen a single post from anyone with a similar stepping.
08-22-2007, 09:18 AM
Lu(ky

I am at 3.6 at stock voltages easy OC just trying to break it in here. I will try 3.8 today, then I hope 4.0 etc..
08-22-2007, 09:23 AM
cletus_cassidy

You have the same stepping then?
08-22-2007, 04:30 PM
Teccxpert

Highest 1hr Orthos stable FSB with no mods Giga DQ6. & ES E6850 for my setup.

http://i194.photobucket.com/albums/z...d_8x492Mhz.jpg
08-23-2007, 09:35 PM
Lu(ky

1 Attachment(s)

New SuperPi 1M high for me...
08-23-2007, 10:11 PM
eva2000

My 2x E6850 L723A347 cpus on Asus Blitz Formula 1101 with Corsair Nautilus 500 water cooling:

E6850 L723A347 #1
VID: 1.325v
Max boot into memtest86+ v1.70 at 1.296v default vcore = 3933Mhz
Max FSB = 485-487FSB
Max CPUZ Validation = 4374Mhz - 9x486FSB at 1.712v
3006Mhz = 1.192v Prime95 v25.3
3600Mhz = 1.336v Prime95 v25.3
4000Mhz = 1.472v 32M
Max 1M = 4338Mhz at 1.712v single core, 4323Mhz at 1.632v dual core
Max 32M = 4266Mhz at 1.712v single core, 4158Mhz at 1.632v dual core

vs

E6850 L723A347 #2
VID: 1.3375v
Max boot into memtest86+ v1.70 at 1.296v set vcore = 3897Mhz
Max FSB = 530-535FSB
Max CPUZ Validation = not yet tested
3006Mhz = 1.168v Prime95 v25.3
3600Mhz = 1.304v Prime95 v25.3
4000Mhz = 1.472v 32M
Max 1M = not yet tested
Max 32M = 4104Mhz at 1.632v dual core (even 1.68v-1.712v vcore didn't help 32M pass at 4158Mhz single core or dual core enabled)
08-26-2007, 01:25 AM
dinamite2

this is mine e6850 L723 :D
cooled to liquid Tamb 25°
all from bios

super pi 1 mega a 4355 mhz 544x8

http://www.pctuner.info/up/results/_...4350Medium.JPG

max fsb 580x6

http://www.pctuner.info/up/results/_..._580Medium.JPG
08-26-2007, 02:27 PM
Infa

Max Validation 4.4GHZ - http://valid.x86-secret.com/show_oc.php?id=234398

Super Pi: 11.922s (Checksum 9B1A8C97) @ 4.275GHZ.

http://hem.bredband.net/infan/spi4275.jpg
08-27-2007, 02:19 AM
kiwi

3 Attachment(s)

L721A
Not so good in comparison to other 6850

3.8 1.5V stable
4Ghz 32M stable 1.65V (crashes prime instantly)
4.1 1M

FSB wall @ 490 :down:

See attach.
08-28-2007, 05:34 AM
Leeghoofd

My E6850 arrived today

FPO batch L723B222 Pack Date 08/08/07

Vid reported by Coretemp 1.3125

Orthossing now at stock speeds will edit this post later on with some OC's... nice thing is I can run 3ghz already with way lower chipset voltages than with my E6600

Striker Extreme :

E6600 -- E6850

Vcore 1.35 -- 1.32
1.2HTT 1.35 -- 1.2
NB voltage 1.35 -- 1.2
SB Voltage 1.55-- 1.5
CPU VTT 1.4 -- 1.25

Catch ya laterzz

Edit :

Orthosses 8 hours (blend test) at 3.6 at stock voltage, no errors, went fine, bought a new Seagate 500GB S-ATA2 hooked it up started transferring large files and after 2 mins the pc rebooted lol :rofl: several times lol voltages for the Striker were :

Vcore 1.35
1.2HT : 1.3
NB Voltage 1.4
SB Voltage : 1.5
CPU VTT : 1.4

Could I be experiencing the weird HD/680I issue here ? Will adapt my voltages on the chipsets to dig further into the matter...

At 3.6 the max laod was 50-52°C same as my E6600 but idle temps are 6-8°C lower...
08-28-2007, 06:11 AM
Infa

Yeah, want to see what the B model will do, hear they are a tad better?
08-28-2007, 12:53 PM
TheGoat Eater

I JUST GOT MINE IN - at 1.325vcore in bios (BFG 680i rev. A2 w/P30 BIOS) I am at 3.825 at first boot just fine - temps at 100% LOAD ARE FREAKIN LOW! <-45ish

I will have water cooling tomorrow!
08-29-2007, 12:39 AM
stephen23

1 Attachment(s)

Quote:

Originally Posted by eva2000

My 2x E6850 L723A347 cpus on Asus Blitz Formula 1101 with Corsair Nautilus 500 water cooling:

E6850 L723A347 #1
VID: 1.325v
Max boot into memtest86+ v1.70 at 1.296v default vcore = 3933Mhz
Max FSB = 485-487FSB
Max CPUZ Validation = 4374Mhz - 9x486FSB at 1.712v
3006Mhz = 1.192v Prime95 v25.3
3600Mhz = 1.336v Prime95 v25.3
4000Mhz = 1.472v 32M
Max 1M = 4338Mhz at 1.712v single core, 4323Mhz at 1.632v dual core
Max 32M = 4266Mhz at 1.712v single core, 4158Mhz at 1.632v dual core

vs

E6850 L723A347 #2
VID: 1.3375v
Max boot into memtest86+ v1.70 at 1.296v set vcore = 3897Mhz
Max FSB = 530-535FSB
Max CPUZ Validation = not yet tested
3006Mhz = 1.168v Prime95 v25.3
3600Mhz = 1.304v Prime95 v25.3
4000Mhz = 1.472v 32M
Max 1M = not yet tested
Max 32M = 4104Mhz at 1.632v dual core (even 1.68v-1.712v vcore didn't help 32M pass at 4158Mhz single core or dual core enabled)

My L722A232 on 32M pi
same as yours!
08-29-2007, 12:41 AM
stephen23

1 Attachment(s)

1M pi on 4.2G
08-29-2007, 11:39 AM
eva2000
Quote:

Originally Posted by stephen23

My L722A232 on 32M pi
same as yours!

congrats :)

System
- Intel Core 2 Duo E6850 retail L723A347 G0
- Scythe Infinity with modded mount + 120x25mm Spire 96cfm fan
- Transpiper heatsink NOT installed
- DFI LP UT P35-T2R 8/23 bios flashed from 8/10
- 128MB Gainward FX5200 PCI
- 2GB Crucial Ballistix Tracer PC2-8500 naked modules Green dimm slots
- 80GB Hitachi 7K80 SATA
- LiteON CD-RW
- 700W OCZ GameXStream
- WinXP Pro SP2
E6850 @3000Mhz - 9x333FSB at 1.184v

Load
http://fileshosts.com/intel/DFI/DFI_...ime95_load.png

E6850 @3600Mhz - 9x400FSB at 1.328v

Now at 3600Mhz at 1.33125v bios (1.344v idle and 1.328v load)

Load
http://fileshosts.com/intel/DFI/DFI_...ime95_load.png

E6850 @4005Mhz - 9x445FSB 1:1

Bloody awesome E6850 @4005Mhz at 1.552v Prime95 load Scythe Infinity air cooled in 25.5C room ambient temps :D

http://fileshosts.com/intel/DFI/DFI_...ime95_load.png
08-29-2007, 08:00 PM
hlonipha

A little higher, 50 more mhz to go on air

http://i65.photobucket.com/albums/h2...hoscropped.jpg
08-30-2007, 01:26 AM
michaLcoughliN

70c load temps. ouch!..
08-30-2007, 09:50 AM
hlonipha

debating on water cooling or Phase Change cooling setup. I can only fit a single rad on my case without having to cut all over it but that then a single rad will not do the trick. The waterkeg is $400.00, in my budget is a bit much for the possible gains in clocks speeds, 72c is not bad as the tjunction is 100c. this orthos run was on small ftts and that generates the most heat. In my real world usage no application will replicate those temps.
hlo
08-30-2007, 10:02 AM
Pt1t

L720A under watercooling (20° water)

http://www.pt1t.net/E6850/E6850_P5KE...5mhz_1_45v.PNG

http://www.pt1t.net/E6850/E6850_P5KE....PNG-VCore.png
08-30-2007, 10:22 AM
peterpiper

2 Attachment(s)

Mines a L719B018 with a VID of 1.35v. Here's a few screenies..
Just can't hit the 4gig mark, think the motherboard might be holding me back!
08-31-2007, 01:28 AM
TheGoat Eater

I've got mine semi stable at 4202MHz - click my HWBOT sig for a lot of tests - now I am working on finding the sweet spot w/ volts and speed
08-31-2007, 08:33 AM
OnDborder

Quote:

Originally Posted by TheGoat Eater

I've got mine semi stable at 4202MHz - click my HWBOT sig for a lot of tests - now I am working on finding the sweet spot w/ volts and speed

What batch?
08-31-2007, 08:38 AM
LivingL@rGe81

Quote:

Originally Posted by peterpiper

Mines a L719B018 with a VID of 1.35v. Here's a few screenies..
Just can't hit the 4gig mark, think the motherboard might be holding me back!

Thats alot of volts mate I have that exact stepping & can bench at 4200Mhz with that voltage!!!!

Try tweaking your ram settings & giving your vMCH some more volts

By the way i'm using a Turiq Tower with a 60CFM sunon fan inside! Still building my watercooling loop
08-31-2007, 07:04 PM
TheGoat Eater

Quote:

Originally Posted by OnDborder

What batch?

L719B095:shrug:
http://img373.imageshack.us/img373/9193/cpuiz9.jpg
08-31-2007, 10:04 PM
michaLcoughliN

I tried last nigt @ 4ghz with 1.55vcore.. failed withing 5 seconds. kind of a piss off really .. Any ideas? Im thinking it needs 1.6 or higher to get 4 ghz on this =[
09-01-2007, 02:06 AM
peterpiper

Quote:

Originally Posted by LivingL@rGe81

Thats alot of volts mate I have that exact stepping & can bench at 4200Mhz with that voltage!!!!

Try tweaking your ram settings & giving your vMCH some more volts

By the way i'm using a Turiq Tower with a 60CFM sunon fan inside! Still building my watercooling loop

I've played around a lot, temps hit 54 degrees while running orthos blend, and just short of that running orhos cpu only (speedfan). Now I'm also runnin Vista 64, and from what I'm reading there's a fair amount of confusion over accurate temps from the various programs. It appears even the VID can change with different versions of coretemp. I get different readings from coretemp, everest and speedfan? that aside I agree there may be a limit with the memory, but I think it's either the fact that it's 4 gigs as opposed to 2. More heat and stress on memory controller, or it's the motherboard. 2gigs of the same memory can hit higher speeds according to custompc magazine in a P5K Deluxe!
09-01-2007, 05:54 AM
famich

E 6850 L 719A741 4005@1,45VC under load

http://i203.photobucket.com/albums/a...Prime40051.jpg

:D
09-01-2007, 12:49 PM
peterpiper

Can 2 processors from the same batch, with the same stepping have different VID's? sorry if it's an ignorant question..
09-01-2007, 01:03 PM
mashakos

:shocked:
can you guys mention what cooling you're using cause the 4Ghz overclocks don't sound like they're being done on air. kthx
09-01-2007, 01:10 PM
tomati

Quote:

Originally Posted by peterpiper

Can 2 processors from the same batch, with the same stepping have different VID's? sorry if it's an ignorant question..

yes

I get a Q6600 with same stepping as a friends his one git VID of 1.25v as mine is 1.2625v, so I guess it would be the same for E6850.
09-01-2007, 01:16 PM
peterpiper

Quote:

Originally Posted by LivingL@rGe81

Thats alot of volts mate I have that exact stepping & can bench at 4200Mhz with that voltage!!!!

Try tweaking your ram settings & giving your vMCH some more volts

By the way i'm using a Turiq Tower with a 60CFM sunon fan inside! Still building my watercooling loop

Do you know what the VID of yours is? also what are your voltages? mine are
Vcore 1.5750
Vmem 2.35
Vfsb 1.400
Vnb 1.55
Vsb 1.50
Vich 1.215

any suggestions, anyone?
09-01-2007, 07:58 PM
dogsx2

DFI P965-s only can run 1:1 on memory so the time is not so great.
TR 120 Ultra
L722A496

http://img530.imageshack.us/img530/3...pi1mel5.th.jpg
09-01-2007, 09:31 PM
Leeghoofd

yeah right you must be kidding me 12.5 secs on 1m with a CPU at 2.7Ghz, so if you use that rig and pull it up to 3.6 you will beat a world record while others need 4-5ghz to obtain a time like that or it's EIST dropping back multi back to 6x...

What is your real CPU speed ?
09-01-2007, 10:12 PM
michaLcoughliN

Quote:

Originally Posted by mashakos

:shocked:
can you guys mention what cooling you're using cause the 4Ghz overclocks don't sound like they're being done on air. kthx

35c idle and 55c load at 1.525vcore with my Zalman 9700
09-01-2007, 10:17 PM
TheGoat Eater

Quote:

Originally Posted by mashakos

:shocked:
can you guys mention what cooling you're using cause the 4Ghz overclocks don't sound like they're being done on air. kthx

swiftech H20-120 compact - 4 now - I plan on buying a waterkeg cooling setup as it suits my needs so that is another 540~USD out of my pocket:down:
09-01-2007, 11:19 PM
hlonipha

Quote:

Originally Posted by michaLcoughliN

35c idle and 55c load at 1.525vcore with my Zalman 9700

You might want to check this temps with core temp 95.4 cause those seem a little on the low side specially if you are talking about Orthos small ftts full load.
no way no how you are at 55c with 1.52v.
09-02-2007, 02:20 AM
dogsx2

Quote:

Originally Posted by Leeghoofd

yeah right you must be kidding me 12.5 secs on 1m with a CPU at 2.7Ghz, so if you use that rig and pull it up to 3.6 you will beat a world record while others need 4-5ghz to obtain a time like that or it's EIST dropping back multi back to 6x...

What is your real CPU speed ?

or it's EIST dropping back multi back to 6x... It's 9x456. I don't know why it never shows (6-9) on cpu-z. I guess I should disable it so some guys don't get confused ;)
09-02-2007, 08:38 AM
Supertim0r

32M...single channel :(
09-02-2007, 04:36 PM
Lu(ky

2 Attachment(s)

Quote:

Originally Posted by dogsx2

DFI P965-s only can run 1:1 on memory so the time is not so great.
TR 120 Ultra
L722A496

http://img530.imageshack.us/img530/3...pi1mel5.th.jpg

I have the same setting but CPU at 4.1GHz and memory at 456x2=912 4-3-3-8 2t 2.0 and get SuperPi 1M at 12.594 something is wrong there on his score?? How can he get better with a lower CPU speed?
09-02-2007, 04:46 PM
dogsx2

Quote:

Originally Posted by Lu(ky

I have the same setting but CPU at 4.1GHz and memory at 456x2=912 4-3-3-8 2t 2.0 and get SuperPi 1M at 12.594 something is wrong there on his score?? How can he get better with a lower CPU speed?

I got a 24 inch LCD and I can't read what yours says. I think it says we are both at 4100MHz but am not sure. Read the post before yours. LOL
09-02-2007, 08:27 PM
Supertim0r

Quote:

Originally Posted by Lu(ky

I have the same setting but CPU at 4.1GHz and memory at 456x2=912 4-3-3-8 2t 2.0 and get SuperPi 1M at 12.594 something is wrong there on his score?? How can he get better with a lower CPU speed?

just remove norton and you're 1 sec faster :rofl:
09-03-2007, 09:02 AM
dogsx2

Wish the 4:5 worked. :( 1.58v load. Really runs cool with TR 120 Ultra.

http://img116.imageshack.us/img116/7858/4032mwl6.th.jpg
09-03-2007, 09:21 AM
aasmaukr

I'll recieve some sweet stuff pretty soon :) E6850, Corsair HX620W and two 1gig Crucial 10th anniversary sticks. I'll post results by friday.
09-03-2007, 01:29 PM
Infa

Check this out :P

32M Super PI @ 4300MHZ Cas 4-4-4-6

Http://hem.bredband.net/infan/s-pi32m.jpg

And This is My best Super PI 1M @ 4320Mhz Cas 4-4-3-4

Http://hem.bredband.net/infan/spi4320.jpg

And, Max Validation is 4401.

http://valid.x86-secret.com/show_oc.php?id=234398

Orthos Stable is coming....ETA, Couple of days.
09-03-2007, 01:46 PM
webwilli

My SuperPI 32M

Asus P5K Deluxe
2x1024MB G.Skill 8500 GBHK @ 600 5-5-4-8
Water

http://pics.mwirths.de/pics/thumb/4320_32m.jpg
09-03-2007, 01:50 PM
Infa

OMG 1 minute ALL IN THE RAM, i cant even get 4:5 on my Freakin 965 BOARD!
Not even in 450fsb...
now im sad! :(
09-03-2007, 02:10 PM
Grinch

Quote:

Originally Posted by Infa

Check this out :P

32M Super PI @ 4300MHZ Cas 4-4-4-6

Http://hem.bredband.net/infan/s-pi32m.jpg

And This is My best Super PI 1M @ 4320Mhz Cas 4-4-3-4

Http://hem.bredband.net/infan/spi4320.jpg

And, Max Validation is 4401.

http://valid.x86-secret.com/show_oc.php?id=234398

Orthos Stable is coming....ETA, Couple of days.

what's the batch/stepping of your cpu?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 10:15 AM.

XtremeSystems