hi malik...:D
very great work..;)
can you tell me where i can find the fitting who you use in this cooling sistem??
and what size do you use ??:)
Printable View
hi malik...:D
very great work..;)
can you tell me where i can find the fitting who you use in this cooling sistem??
and what size do you use ??:)
seb87 here u are ;)
thx:)Quote:
Originally Posted by rafwlkp
how much is the external size ( diameter ) of this fitting ??Quote:
Originally Posted by Malik
New stuff from Feser One ( big thanks Martin :) ) All will be tested.
Quick making photos:
http://img525.imageshack.us/img525/4428/dscf1873fs6.jpg http://img120.imageshack.us/img120/3034/dscf1881ch5.jpg
http://img525.imageshack.us/img525/1816/dscf1879ky2.jpg http://img525.imageshack.us/img525/1713/dscf1882ig5.jpg
Seb87: size is 20mm
is it safe to spraypaint tubes to achieve the colour you want? or will it crack and fade away because of the tubing being bent?
This tubes are in this color ...i don't use any spraypaintQuote:
Originally Posted by Boogerlad
That's nice looking tubing, I'd really like to see how the white looks in action.
On weekend i will be testing ... stay tune :)
Malik Malik do u have red F-1 tubes or just that on phots ?:)
Still waiting for the pic u promised me. I hope u didnt forget :)
Whooaaahhhhhh I Want Those White Hoses Nowww!! When and where can I buy them!?!?!? I'm going to begin a white v1000 project soon so these tubes would be so nice :D I always wanted white hoses!
Check PM :)Quote:
Originally Posted by ChaosAD
Soon in Feser One :)Quote:
Originally Posted by dnb#
Thanx a lot. Got the idea. :up:Quote:
Originally Posted by Malik
The white tubing would do great in a colour contrast case, but I have to wonder how does it match up to Tygon in quality, bend radius and so forth.
The silver / grey isn't too shabby either.
Malik, you are using a PA 120.3 which is using BSPP 3/8" . Koolance compression fittings are using BSPP 1/4". What reducer have you used and where did you get it from?
I dont know which ones he is using but i bought these http://www.frozencpu.com/products/23...NBwB&mv_pc=896
Quote:
Originally Posted by dana_2
Quote:
Originally Posted by Kingslayer
I use this reducer: Cooling.pl Shop link
UPDATE:
First i mount silver tubes by Feser One, and they looks like that:
With blue leds:
http://img254.imageshack.us/img254/8963/dscf1894gt4.jpg http://img254.imageshack.us/img254/7049/dscf1895sc6.jpg
http://img254.imageshack.us/img254/165/dscf1896nq2.jpg
http://img160.imageshack.us/img160/4691/dscf1897nt5.jpg
On day:
http://img254.imageshack.us/img254/2229/dscf1910am2.jpg http://img160.imageshack.us/img160/170/dscf1901rz2.jpg
http://img160.imageshack.us/img160/3296/dscf1905yo4.jpg http://img254.imageshack.us/img254/7968/dscf1908ra1.jpg
I think that to this tubes i need black liquid feser one with white led from the top of res - for better look. With this clear feser one -it's look icky for me :(
What you think guys ?
hmm...With led OK, but on day light look sux.
Try orange :)
The silver tubes don't do your system justice Malik. I really loved the clear with the green Feser One, that looked really sweet. I'm interested to see other colors though. Keep em coming.
:yepp: ,i agreeQuote:
Originally Posted by BlueAqua
Quote:
Originally Posted by BlueAqua
OK guys maybe acid green setup was the best, but got bored with it. I must try something new ... from feser one :)Quote:
Originally Posted by Snowfortrick
try uv blue tube:)Quote:
Originally Posted by Malik
Boooooring :)Quote:
Originally Posted by Snowfortrick
you know that I want the white tubes, so give me some impressions m8 :D I'm already thinking of buying those and spray an v1000/2000 mirror white and buy some XEN-CORE fans with white sleeves...... whooaah that would look nice.
soo stay tuned ... white tubes setup soon :)
UPDATE:
Some new pics:
http://img523.imageshack.us/img523/7207/dscf1928xo5.jpg http://img523.imageshack.us/img523/9475/dscf1929wg8.jpg
http://img442.imageshack.us/img442/9017/dscf1930ky3.jpg http://img100.imageshack.us/img100/1484/dscf1932uf9.jpg
http://img523.imageshack.us/img523/9787/dscf1933vc4.jpg http://img100.imageshack.us/img100/9384/dscf1936ef6.jpg
http://img523.imageshack.us/img523/1171/dscf1937mk9.jpg http://img100.imageshack.us/img100/8805/dscf1938so9.jpg
http://img442.imageshack.us/img442/9710/dscf1934mr8.jpg http://img442.imageshack.us/img442/3716/dscf1935sd6.jpg
:eek:sexy :cool:
wow, that case is really lit up evenly. :S how many leds and ccfls u got in there total?
what colour tubes are those?
Really nice lighting in those pics man... what camera are you using?
Is that the silver Tygon? Don't change a thing, it is beautiful.
HOLY COW.... That looks like an artificial 3D rendered system.... How can you make it look like that? These can't be just casual shoots...
This really looks like art. A watercooling masterpiece? :up:
PS - where can I buy a poster? You could probably make money off that :D
huwaw!
I use only 8 leds :)Quote:
Originally Posted by barfastic
Quote:
Originally Posted by disruptfam
This are silver Feser One tubes, here are United colors of Feser OneQuote:
Originally Posted by taowulf
Fuji FinePix S9600Quote:
Originally Posted by Nate P.
8 single LEDs or 8 clusters?Quote:
Originally Posted by Malik
Great work by the way.:up:
Malik, not to doubt your work... you do amazing stuff... but see... recently, i was over at Paris and Milan for the fashion week and was doing some buying for my business... problem is, that the damn eastern european models they have makes any crap look sexy and gorgeous...
your pics are great! more than great... fookin amazing... but sometimes i wonder how normal daylight shot of it will look...
no offense intended...
just wondering
Here you have:Quote:
Originally Posted by kinghong1970
http://img402.imageshack.us/img402/4323/dscf1939hq7.jpg http://img402.imageshack.us/img402/8757/dscf1942as8.jpg
http://img72.imageshack.us/img72/8118/dscf1944pe2.jpg http://img402.imageshack.us/img402/2017/dscf1945kv8.jpg
http://img72.imageshack.us/img72/5545/dscf1947vb8.jpg http://img211.imageshack.us/img211/4383/dscf1948ud3.jpg
http://img211.imageshack.us/img211/6733/dscf1950gj8.jpg http://img72.imageshack.us/img72/923/dscf1952fx2.jpg
http://img72.imageshack.us/img72/8682/dscf1940pb0.jpg http://img402.imageshack.us/img402/5362/dscf1951tk2.jpg
Very Nice! :clap: :clap:
What size tubing (id&od) is that?
thanks for the reply... absolutely gorgeous...
this are 10/13 tubes. More detalis HEREQuote:
Originally Posted by SiGfever
You're welcome :)Quote:
Originally Posted by kinghong1970
Thanks for the link. :up:
how about the temps?
I really hope a US distributor will have this tubing available for sale soon (Petra?). I'm diggin' the yellow. :clap:Quote:
Originally Posted by Malik
Malik is the Fesser tubing easy to bend without kinking? How does it compare to the Tygon 3603 you were using?
Both FrozenCPU and Perf-PCs carry Feser tubing in red, green, clear/blue and blue. If the demand becomes great enough, I suspect either one could bring in the other colors as well.Quote:
Originally Posted by ShoNuff
Idle temps 24/7 setup:Quote:
Originally Posted by bugkalot
CPU: 31 ( 3.5Ghz/ 1.08V )
NB: 29 ( 1.3V )
SB: 30 ( 1.07V )
GPU: 25 ( bios mod 1.1V )
Mobo: 28
All fans on 4V ( 500 rpm )
Yes, it's easy to makes bends. I don't have any problems with that.Quote:
Originally Posted by ShoNuff
Hahaha Malik - that ROCKS MORE THAN ROCKING ROCK-STARS!
Just back from the Maldives - Time for you to send me photos - again! :)
After "little" changes which i will make on weekend :PQuote:
Originally Posted by dualbrain
what led are those?
Silent?! :DQuote:
Originally Posted by Malik
This Innovatek ledsQuote:
Originally Posted by bugkalot
I can say - it's very quiet :)Quote:
Originally Posted by Spacehead
Malik you definately have one of the nicest setups in the whole world, you already know that right? :D
CHEERS!
My custom made top ( 4mm stainless steel ) for 8800GT ek waterblock, with appreciation for homie shop ... :D
http://img148.imageshack.us/img148/2783/logoyc5.jpg
http://img148.imageshack.us/img148/8346/dscf1960cw4.jpg http://img148.imageshack.us/img148/9355/dscf1969xi1.jpg
http://img340.imageshack.us/img340/4051/dscf1970yv0.jpg http://img148.imageshack.us/img148/8476/dscf1971ts5.jpg
http://img148.imageshack.us/img148/3571/dscf1972lf8.jpg http://img340.imageshack.us/img340/1707/dscf1973np1.jpg
http://img148.imageshack.us/img148/4529/dscf1976ov3.jpg http://img148.imageshack.us/img148/9240/dscf1977vd4.jpg
http://img410.imageshack.us/img410/5651/dscf1967ww8.jpg
More pictures soon ...
Wow Malik, that top is really nice. Do you have a local shop that you're friends with?
I just spent about an hour reading this entire thread and I'm really torn.
I really like the black tubing with coils but,
Green and black has always been my first love.
Amaizing!!!!!!!!!!!!!!!!!!!!
Yes :)Quote:
Originally Posted by BlueAqua
New pics:
http://img410.imageshack.us/img410/4764/dscf1988jm5.jpg http://img170.imageshack.us/img170/8438/dscf1990gg5.jpg
http://img170.imageshack.us/img170/87/dscf1991na6.jpg http://img170.imageshack.us/img170/74/dscf2001yh0.jpg
http://img170.imageshack.us/img170/9795/dscf1994rh6.jpg http://img170.imageshack.us/img170/9386/dscf1996pm0.jpg
http://img168.imageshack.us/img168/5071/dscf2013oz7.jpg http://img170.imageshack.us/img170/7499/dscf2003qp4.jpg
http://img168.imageshack.us/img168/5613/dscf2006is8.jpg http://img170.imageshack.us/img170/2082/dscf2016tj6.jpg
Thanks for the info. I painted my rads school bus yellow. The Feser Yellow tubing would be sweet under the UV lights. I'm going to send Hank an email to see if he is willing to stock the yellow and white colors.Quote:
Originally Posted by Waterlogged
New pics by daylight:
http://img175.imageshack.us/img175/7297/dscf2030wp4.jpg http://img329.imageshack.us/img329/2830/dscf2031ay5.jpg
http://img329.imageshack.us/img329/8400/dscf2034dn1.jpg http://img406.imageshack.us/img406/5189/dscf2035rm9.jpg
http://img406.imageshack.us/img406/5939/dscf2036iz8.jpg http://img362.imageshack.us/img362/2821/dscf2040bx2.jpg
http://img329.imageshack.us/img329/3356/dscf2032al4.jpg
neverending soap opera, part 1421 :)
IMO your previous stages, were better due to black/transparent tubing. IMO :)
Malik, Malik...just awesome :D U rox and ownz :P
Tell me when u set up white tubing ?
matter of taste ;)Quote:
Originally Posted by pmp
Thanks :)Quote:
Originally Posted by rafwlkp
About white tubes.. there is "little" problem - flexibility. There are less flexy than other color. I try to put this tubes, but by second blend was problem. Interval between two fittings is 2,6cm smaller than in first blend, and when i use longer or shorter length of white tubes - the same :(
http://img155.imageshack.us/img155/9799/dscf1917uv2.jpg
too bad the white tubes arent that flexible....But they look AWESOME
Yes, they look niceee :)Quote:
Originally Posted by dnb#
I will try once again with white tubes, and then i show pics :)
UPDATE:
Some wallpapers if someone want :) ( Rookie job in Adobe )
http://img371.imageshack.us/img371/4314/wall1vp1.th.jpg http://img237.imageshack.us/img237/4824/wall2sa3.th.jpg http://img237.imageshack.us/img237/2045/wall3ti3.th.jpg http://img371.imageshack.us/img371/4499/wall4le0.th.jpg http://img371.imageshack.us/img371/8223/wall5dc2.th.jpg http://img237.imageshack.us/img237/4889/wall6az0.th.jpg http://img167.imageshack.us/img167/4550/wall7zq4.th.jpg http://img341.imageshack.us/img341/7714/wall8rr6.th.jpg http://img167.imageshack.us/img167/8765/wall9xs0.th.jpg http://img166.imageshack.us/img166/1...9452aw0.th.jpg
You Are The Man!
nice wallpapers malik! your setup pawns all :D
New stuff arrived from cooling :)
Not one ...
http://img381.imageshack.us/img381/6681/dscf2082nx0.jpg
but eight !!!
http://img381.imageshack.us/img381/7075/dscf2079ov1.jpg
Fans inside:
http://img85.imageshack.us/img85/729...094copysh2.jpg
eee...with leds ? c'mon Malik, Christmas ended 3 months ago ^^
Malik, do yo actually use this computer...or is it just a fashion model? Honestly d00d, this thread has gotten boring?....WOW, never thought I'd hear myself say that. :shakes:
No this is what a system should look like if you post it. Why should you post your system when it looks like crap? ;) That's what I mean. And that's why your pc isn't on MDPC and Malik's system is. Don't get me wrong, you all don't have to spend all that money and effort to just get a nice look. BUT I THINK IT'S A DAMN NICE SYSTEM AND HE DESERVES ALL THE ATTENTION! And if it aint a pc it's a car, house, bike, sandwich or cat you can pimp.
Malik, what's about your teeth? are they nice and white too? because I've heard several things about your job :)???
and back to XS style posting (to get as much posts as you can) Nice system m8, keep up! :D
dnb#, It's mostly the same gear continually re-dressed in new tubing and colors...it's like a runway model doing a fashion show in Milan....*sigh*
I really like every post Malik makes. I think it's great how he keeps us updated with his progress and how he shares his enthusiasm. Keep it up Malik.
BUT he tests the new tubing from Feser and liquids what you will buy because you saw it before (that's what this GREAT thread does with enthusiasts). and he's using the perfect stuff all together what makes peoples wallet empty and delivers a great value to xs and you actually don't by adding such a boring post. He simply makes promotion in someway, that's what visistors of WC threads need. They don't need ugly systems with wc loops made from scrath. because you don't buy something when you don't know what it is at all.Quote:
Originally Posted by Waterlogged
So all by all this is great for all members / lurkers who wants inspiration.
That's the reason this thread already has 269 replies and 14125 views ATM.
convinced yet?
cheers :)
Nope, I'm not sucked in by "pretty fluids" that perform worse than plain distilled water, over priced colored tubing, or fans that look nice but under perform. A certain amount of "bling" is nice, just as long as it doesn't affect performance or cost me an arm and a leg (I'm nowhere near as rich as some of you guys, in fact, I'm very much in debt due to my "bleeding edge days" from '99 to ~'02).
Ok, that's fine, but don't post stuff that we don't want to hear then. I like to spend money on looks. I don't buy a Bugatti with 13" mini cooper rims because it performs better. when something costs a lot of money it's just a logical thing to make it look better. and believe me the performance is the same, maybe even better then somebody with a identical setup. it's not about 1c-2c difference, it's about the REAL performance. FPS, 3dmarks, clockscores etc. not about the temps of the cpu.... My cpu is liquid cooled with the best stuff there is. and it's hitting 60c celcius (70 is intels max) full load, and that's because my fans are on 20%. If I turn these fans on 100%, the speeds aren't going up? maybe your system does, but my e6750 runs on more then 4 ghz 24/7 and my gts320 on 690 core 2000 mem 24/7 with high temps. but it's silent and gets above 13k 06marks. what do you want more?
So, nice lookin fans DON'T effect performance and dye doesn't either. It's just the way you do it.
bye
I agree with Watercooled. Most people will build computers to be USED and often, worklogs will include just 1 or 2 revisions due to unexpected changes or upgrades. Here, I just see a pretty computer with parts being swapped a lot (keep it mind that initially, it's titled Innovatek by Malik with Innovatek parts).
This is where we need to draw a line between a genuine worklog and a marketing pitch thread.
if you dont like this post then dont read it anymore !Quote:
Originally Posted by Waterlogged
and stop being a :banana::banana::banana::banana::banana:
I ask the main question again: Would you buy a watercooling setup if nobody posts nice images? Would you buy a house that looks like :banana::banana::banana::banana: but has 6 carports?Quote:
Originally Posted by Xilikon
Ok WL i agree with you that is the same setup only with "light" changes like tubes etc. But you don't understand why i show it. For example this tubes are not available now, and some people want to see how they look - and i make all this pics for this guys. If you suggest that all is OT - i can stop, no problem.Quote:
Originally Posted by Waterlogged
PS.
thanks for all my fans :D
I sure as hell would buy a crap shack of a house with a huge garage. and we buy WC for the quiet and performance, there are probably alot of other fans that will run a cooler temp quieter. plus putting it together and keeping it running is half the Fun IMO. i too tyre of continual tubing revisions, but it shouldnt be named the way it is if it is for the sole purpose of showing tubing and fluids.
Pretty house with 800 square feet and a one car garage can't house very many wives and kids and park very many cars. Ugly house with 4000 square feet and a 12 car garage can house a harem and park a crap load of cars :)
god i love the way you think Iany. im thinking giant aircraft hanger, 10,000 sq. ft+, with a house above it. :p WOO
There are so many other threads with systems that people should like if Maliks system is not their taste. If I would post in every thread where I don't like something: I would need some blind-writers. This is why i.e. I just comment interesting or beautiful things.
So Malik: Go on!
OH MY GOD THAT WHITE LOOKS YUMMY DELICIOUS :shocked:Quote:
Originally Posted by Malik
another dutchman that likes the white hoses :D
Is it typical dutch that we like white tubing? Because I think that color is SWEET
Hi malik I love your mods, i have one question.
If you put green coolant in silver tube do you see the green ?
Are they a little transparent ?
Quote:
Originally Posted by ultimeus
You don't see anything - because they are not trasparent
Thanks.Quote:
Originally Posted by Malik
First - @ Malik you have a nice piece of PC, nice work keep it going. :)
Second, well, ok I agree that setup is the same from some time, but there we have the oportunity to look at new stuff eg: white or silver tubing, and it helps us with making some decisions or gives us new inspiration. Personally I don't care at all how much Malik spends on his PC.
I like his ideas, some of them inspired me when I made my rig.
The same as Raid's rig (XS watercooled case gallery) pushed me into building new PC case and WC setup.
Damn nice looking setup :) Only little thing I would have loved, was countersunk screws on that stainless steel top, or a mod of the EK blok, so that it was assembled from the rear with the screws going into the top instead, but still, really nice looking blok and system :)
Only one new stuff in my LC
http://img181.imageshack.us/img181/5410/dscf2410id9.jpg http://img181.imageshack.us/img181/8127/dscf2409sp1.jpg
http://img116.imageshack.us/img116/3645/dscf2408qy1.jpg http://img151.imageshack.us/img151/6047/dscf2404ix5.jpg
http://img151.imageshack.us/img151/962/dscf2403tl7.jpg http://img181.imageshack.us/img181/4981/dscf2399we1.jpg
http://img116.imageshack.us/img116/8880/dscf2414ky8.jpg http://img291.imageshack.us/img291/8346/dscf2295cl7.jpg
I'm thinking about new project, so this one is finished.
Just awesome...like always :)
Tell me what are u planning ? Maybe new case ? :up:
Yes, new case, new project, new stuff :)
nice to see it finished
looking forward to seeing some new stuff from you.
Defo new case :)
And here is problem... i love my stacker case :)Quote:
Originally Posted by disruptfam
Malik have you contacted Nils about the newer pics of yours? because this looks way better then the green setup :)
I must talk with Nils about gallery update.
Malik, I see where your rad is placed, but how did you attach it to the case?
Ha :) This is Malik secret :DQuote:
Originally Posted by fearo
Come on man..:p: I'm very tempted to buy a stacker case and put a 3x120mm up front but first I need to know how you mounted it.:D
OK, i will make some photos with rad mount for you :)Quote:
Originally Posted by fearo
AHAHAHAHAHA this is why you'll never hear me throw a fit when you use alu, which i normally do. :up:Quote:
Originally Posted by Malik
You go for the complete bling which is seriously a work of art!
However im glad to see you got rid of the innovotek stuff. Migrating to the koolance gear now? :D How you liking those compressions also?