i've done tons of nlite, it never helps. the only purpose its useful for imho is automating installs and slipstreaming drivers, which is, don't get me wrong, a great touch.
Printable View
i've done tons of nlite, it never helps. the only purpose its useful for imho is automating installs and slipstreaming drivers, which is, don't get me wrong, a great touch.
here is mine:
http://i163.photobucket.com/albums/t...tos/12.625.jpg
In this thread that counts as a good start, but you're not close to done yet. Performance Level 11?!? ;)
im not really that familiar with memset and its settings yet can you tell me what that Performance Level actually means or does.. with my evga mobo i have no such option available.. that shot i posted was done with asus p5k deluxe mobo :shrug:Quote:
Originally Posted by Gautam
Try bringing it down to 7. ;)
so lower the better ..check.. thanks for the info mate :worship:Quote:
Originally Posted by Gautam
I doubt you'll be able to get that far, what board is this Solar?
NewBeetle is running 7 all the way up to 571, not to mention that the board should boot at 7 at 499MHz.Quote:
Originally Posted by G H Z
asus p5k deluxeQuote:
Originally Posted by G H Z
Solar, there's a couple of things you have to enable in the bios to get the tighter PL... In the IP35 its always set at lowest level hehe... PL= 7 @ 560fsb :D ....
http://www3.telus.net/luis99/5040.JPG
luihed hey thanks bro for screenie.. :up:
A bit later i'll do one on my 3.5Ghz Prescott, you will feel its hyperthreading supremacy!!!!
hyperthreading supremacy ??? for an old single thread application ?Quote:
Originally Posted by Freddie123
lol, he is joking.
This an old screenie I just found of a run I did with a 4 GHz S478 Prescott. :p:
http://www.ocforums.com/attachment.p...1&d=1141333773
Makes me wish I had an OCable board on my prescott :P The mobo is micro atx and the only OC option is changing the FSB. Need to do all my OC's at stock voltage :P
Can someone with P5B tell me, how they can run 2:3 with a 9 x 445? Can't manage to get that combo working.. :(
The best i can get so far:
http://www.abload.de/img/4000_1mply.jpg
Errr...have really really really good ram? :p:Quote:
Originally Posted by funkflix
Hmm, i found a screen from me where i have already done it.. :p: It was with my ES and Ballistix, but normally my new G.Skill clock higher! Will give it one more try soon. :)
http://www.abload.de/img/667mhz_5.5.4.6_1m_2.7vic2.jpg
p5k
setfsb 20b15f
12.516s
4 sticks = better result :)Quote:
Originally Posted by Learn
Very interesting time as usual JP. :)Quote:
Originally Posted by Learn
4 x 1024MB even better! :DQuote:
Originally Posted by monteboy
I need a good P965, it seems better clock for clock with my tweaks.Quote:
Originally Posted by Gautam
1M - 12.531s
http://mekk.homeip.net/imagesharing/...bbdde22346.png
32M - 12M 08.093s
http://mekk.homeip.net/imagesharing/...b52fffedf8.png
M3kk that is a great improvement :up:
Thanks. :)
here is my contribution to this thread with my crappy win installation..
http://i54.photobucket.com/albums/g1...ing/10x398.png
here's mine. not impressive though. :(
Good job bro :CTF:Quote:
Originally Posted by boblemagnifique
:D
It is a fine line (or just a mhz or so) to the next level in iterations.
kick ass ram and score. That's some speed :shocked: Grats on #1Quote:
Originally Posted by boblemagnifique
DDR3 is cheating. :cussing:
bob can you plz rerun at <4001MHz? Some didn't want the CPU speed to be higher.
Final numbers with Allendale @ 4GHz [CPU under DI for that FSB, 2,9VDimm etc]
E4400 444.3x9=3999MHz, RAM 2:3 = 666.5 5-4-4-4
Allendale loves memory frequency so the difference between 500x8 1:1 [1066 strap] is not that small :).
13.688s
http://img338.imageshack.us/img338/4...688sga3.th.jpg
12.625 (result made with only 1GB RAM, Valid little upper)
http://img214.imageshack.us/img214/5...lat4g1mnd8.jpg
More Cas 5 with 4:5
http://img237.imageshack.us/img237/4726/12515mm6.jpg
here is mine, not as good as one of you, but I wanna to improve myself:
http://bp1.blogger.com/_hdbv8BLWrl4/...19.08.2007.JPG
and I would be happy about some comments or advices.
With my news P5K-E
http://img404.imageshack.us/img404/4...48440gpjr1.jpg
:)
P5K
E6850
2x1gig 10th Anniversary sticks (4:5)
Corsair HX620W
My sticks can do 1M CL5 @ 655MHz with 2,33V, with 2,37V they do ~665, but higher voltage doesn't help. I tried upping the NB and FSB termination voltage but that didn't make any difference :(. Any tips?
Anyways I did some quick SuperPI testing on Server 2k3 and here's my result so far:
Attachment 64842
Forgot to switch to mem tab in one CPU-Z :down:
Btw I also had a 12.500 run with some improved timings but it froze before I got to save the screenshot. I tried the same timings again but can't get under 12.515 :(
New run by Team Serbia :) :
http://img169.imageshack.us/img169/3...012500snd1.png
ASUS P5KE3 DLX X38
OCZ DDR3 2x1Gb 1600MHz 7-6-6-24 (micron Z9)
Win sever 2003 :)
12.50 sec
Mine:)
DDR2 is still alive :) :
http://img469.imageshack.us/img469/1...4000mhzxm6.png
Nice :clap:
You really must share some..at least some minor details ;)
Of course, what minor details :) u want to know?Quote:
Originally Posted by G H Z
http://img104.imageshack.us/img104/9486/pibs7.png
Needs some improvement I think, I have 12.593 @ 4002MHz.
@Misko,Quote:
Originally Posted by Misko
:shocked: :clap:
OMG, man.
I did not believe this could be possible.
A score with DDR2 under the 12,500 sec @ 4GHZ.
Most impressive
Very very nice job Misko! :clap:
Bout time someone flexed P35's muscle.
looks good so far
this board will be replaced with a quicker X38 one soon :) so look out for some really low 12.xx :)
12.468s :)
http://img409.imageshack.us/img409/6...mhz7651qn5.png
32M SuperPi was ok but i know it can be better still
11m 43.328s :up:
http://img155.imageshack.us/img155/4...4mhz765dh3.png
Thank u guys :)
@dinos22 great score :up:
Lookin good dinos, give it a whirl at 4000 flat or below if possible. :cool:
http://img.photobucket.com/albums/v4...o-IGN/slow.jpg
MSI ftw right? :rolleyes:
improved:
http://img.photobucket.com/albums/v4...IGN/faster.jpg
:down:
this is why i am not a fan of 1M...between these two setups in 32M there is almost 3 seconds difference. with 1M, not even a tenth. that, and i don't really think i have a great OS setup for 1M benching...might have to work on that.
500*8 / 1000MHz 8-7-6 / PL6 = 12.500
click for full size including Memset...
http://img.photobucket.com/albums/v2...0_1000-1sm.png
571*7 / 914MHz 7-6-5 / PL8 = 12.500
click for full size including Memset...
http://img.photobucket.com/albums/v2...71_914-1sm.png
Yeah, that's the nature of 1M. What if you bring the second one to 4000MHz flat? The 3 MHz is significant.
yeah, thats true too...the 3MHz might bring it down to the 12.478 or whatever the next lowest time 1M will spit out. unfortunately, 571.9 is the next available FSB slot in SetFSB so there is no way for a flat 4GHz on the higher FSB setup.Quote:
Originally Posted by Gautam
Systool allows really really fine adjustments. (close to 1 MHz CPU speed) I never tried it on Asus P35 boards but it should work I would think.
Asus maximus formula se
intel qx9650 extreme
g.skill 8500 hz
new score
http://rol-co.nl/hwi/york4ghz.jpg
Or is the new 45nm not allowed ;) :D
It is now. :p:Quote:
Originally Posted by Rol-Co
OK, 45nm :).
Unfortunately not much tweaked, I had no time [more than month ago ;)].
http://pclab.pl/zdjecia/artykuly/JMK...%20zabawie.JPG
New score :D
Qx9650 extreme
maximus formula se
2gb g.skill pc8500Hz
windows xp pro sp3
http://82.173.172.10/Rol-Co/11234.JPG
sub 45k eff with ddr2 :p:
any reason why my 12.468 run isn't on the first page?
It was too far above 4000MHz...at first I was letting within 5MHz range, but later some people didn't want me to, and after trying it out myself, 4003-4005MHz is much much easier than 4000 flat. It can easily help a tick. There are plenty of 4005MHz times that I had to omit too for this reason. Just trying to keep everyone happy.
Gautam
should it not be x38 chipset instead of P35??
blitz has p35 but maximus x38
meh that time wasn't good enough anyways
wait till i really put the hammer down :D
i've got one CPU coming in soon which i will try to bench at 666*6 with DDR3 heheheh
with LN2 it should be just able to get there....we'll see hehehhehe
you reckon sub 12.4 would be achievable :)
4000 mhz score 12.516
http://i10.tinypic.com/7xtn9j9.png
next time mijn QX9650
3.6GHz, practically 14s dead on CL5..:)
E6750@3600MHz, Corsair Dominator @1128MHz 5-5-4-5-2T@2.23V, XP SP2
14.015s
http://img292.imageshack.us/img292/8...em56nr7.th.jpg
valid:
http://valid.x86-secret.com/show_oc.php?id=293749
Now some sub14's with heavy tweaks coming.
here ya go first time i post
http://i189.photobucket.com/albums/z.../125154Mhz.jpg
12..515 s
For m first post on the forums i guess it's a pretty good one :)
Here is my score after months of tweaking windows ...
http://www.picture.biz/files/c3iq1cuhzp1gbapj168q.jpg
E6850
DFI LP LT X38
Crucial Ballistix PC8500
Holy crap :eek: 2:3 divider?? daamnn...
mems @ 1420 mhz ;)
months of tweaking windows, yet you have a wallpaper?....
Tim maybe the wallpaper helps him or it doesn't harm the bench
maybe he applies the theme after bench is done
one thing is for sure that result is VERY good so he looks like knows what he's doing to me :)
i personally think it's the RAM speed that's helping a lot there :)
On what divider?Quote:
Originally Posted by Diegis0n
I was thinking the same thing, lol.Quote:
Originally Posted by T_M
on what divider i dunno ... i have different option in bios and don't botther calculating it coz i suck @ it ... one thing is for sure, wallpaper or no wallpaper, the result stays the same my friend, try it out ;)
and yes, it's the mem that give the result, @ 600mhz or 666mhz i had no lower then 12.500 but finally havin ballistix got me to 1420mhz ... 1 run, 1screen, en boom basta crash
5/8 obviously if mem is actually at 710mhz. Too bad the top of memset is covered...
yer i noticed the day after posting it ;) but when i did the run again it crashed (12.454 :D) while takin screen so i said :banana::banana::banana::banana: it, i'm waiting on my maximus to get back from RMA mems are more stable on that board is my experience i'll give it another try on there in a few weeks :D
Processor:E8400,Stock Cooler,Q748A095,1.3v bios set,435x9,3.915ghz
Mem:435mhz,5-6-6-18 since using 4GB value Ram
Board:Abit IP35E,P35 Chipset
http://img152.imageshack.us/img152/3...1593ip2.th.jpg