Finished!! E6600 at 3.33GHz on P5WDG2-WS Pro

Quote:

---

Originally Posted by NWEng

You don't have to take the backing off the foam if it's a temporary build or you plan on using it on a different mobo later. I think there's even a blurb in the instructions about it. I used the BT while I was waiting on my WC parts and just didn't stick the foam on the mobo side so I could remove it when I was ready.

---

I wish someone had told me this sooner.. :mad:

:slap:
i probably should have realized that.

either way, i love the BT. i'm actually going to replace my infinity with another BT since i just can't find a way to get the infinity mounted quite right.

Quote:

---

Originally Posted by NWEng

You don't have to take the backing off the foam if it's a temporary build or you plan on using it on a different mobo later. I think there's even a blurb in the instructions about it. I used the BT while I was waiting on my WC parts and just didn't stick the foam on the mobo side so I could remove it when I was ready.

---

i was wondering how you got sli drivers working on this mobo ? which moded drivers did you use ?

i had the 85.96 drivers working on my other 975 mobo but can't seem to get my 7900's working in sli on this board .

any ideas would be great

also can't seem to get aibooster over 450fsb because thats the highest it will go . but i have seem other pics with people and there aibooster is like 475+ . my ram and cpu can go higher and the bios will let me set it to 550 . any ideas i really like to get back to 3.8+ with the 8 mutli .

Quote:

---

Originally Posted by heydo6

i was wondering how you got sli drivers working on this mobo ? which moded drivers did you use ?

i had the 85.96 drivers working on my other 975 mobo but can't seem to get my 7900's working in sli on this board .

any ideas would be great

also can't seem to get aibooster over 450fsb because thats the highest it will go . but i have seem other pics with people and there aibooster is like 475+ . my ram and cpu can go higher and the bios will let me set it to 550 . any ideas i really like to get back to 3.8+ with the 8 mutli .

---

The FSB on the 975X boards cannot go as high as it does on the 965p boards.

Some user's cannot go past 430 FSB on the 975X mobo's. Others are luckier and have gone past 450.

My P5WDG2 WS Pro can do 470FSB, but I'm sure it wouldn't do it for too long (it would probably overheat)

Have you added fans or better cooling to the NB, SB on your board?

Quote:

---

Originally Posted by orion23

The FSB on the 975X boards cannot go as high as it does on the 965p boards.

Some user's cannot go past 430 FSB on the 975X mobo's. Others are luckier and have gone past 450.

My P5WDG2 WS Pro can do 470FSB, but I'm sure it wouldn't do it for too long (it would probably overheat)

Have you added fans or better cooling to the NB, SB on your board?

---

i haven't added a fan to the sb but i added 80mm ones to the ram and nb , plus i took all the heat sinks off cleaned them and added as5 .

i can get my mobo over 450fsb just not with asus software . my cpu seems to stop at 3.8ghz with 1.55v no matter what the multi is .

Quote:

---

Originally Posted by itznfb

are you still using the Scythe Infinity with the stock clips? i had to take the motherboard out of the case in order to get the cooler to [/URL]

---

I find resting on caps is a big problem for aftermarket cooling on s775. Thats the big reason I went for the P5N32-E board thats nice and clear. It will help for insulating in the future too. I killed my P5WDH because I didn't get insulation decent enough around the socket.