Rauk - what clockgen do you use?
Printable View
Rauk - what clockgen do you use?
My Core 2 Duo is stable at 1.2750 V at 8*401 Fsb .... Same stuff as above almost
1.2?!?! Did you run prime and superpi?
Version 1.0.4.8Quote:
Originally Posted by Avman
Clock Generator Setup PLL Selection CY28551
My results so far with my L626A289 -
http://img150.imageshack.us/img150/345/primeva5.jpg
nice clock you have. I can bearly make it stable to run 3.6Ghz at 1.6v in bios.
Here is mine @3.2. Will post update if i can make it 3.6Ghz stable overnight
Processor: E6400 @ 3.2Ghz (week 26)
Motherboard: P5B Deluxe Wifi
Memory: XMS2-8500 3-4-4-8 @800Mhz
FSB: 400
Memory Mult: 1:1
vcore: 1.4 vdimm: 2.4
The rest all set normal voltage (first in the list)
Ambient 29-30
Idle 46 degree
Load 58 degree
Stable on Orthos for 8hrs
Orthos Stable 30 hours ... but if I turn off the LCD monitor, when I turn it back on ... nothing works... however, i can still shutdown windows, and hear the shutdown sound .... XD
Haha, that used to happen to me w/ a DFI nF4 SLI board.
My best 1M so far, but forgot to set CL to 3, will go for some better scores tomorrow. :)
http://img85.imageshack.us/img85/3536/14969lk0.jpg
Vcore is 1,544V.
http://img223.imageshack.us/img223/1...erpi300qx0.jpg
I use that boxed cooler, so my CPU is running pretty hot. Also Southbridge is pretty hot. Easytune says that my CPU use 1.41 Voltage, thats too much. I dont think that I should overclock any more with boxed cooler, so I'm getting Scythe Ninja.
Change manually in your BIOS to 1.3-1.35V and try some more OC.Quote:
Originally Posted by ClockCatcher
Thanks for the tip, that reduced my temps about 10C.Quote:
Originally Posted by mach82
Also I'm thinkin which temps should I look, CoreTemp or BIOS/SpeedFan/Easytune? CoreTemp shows about 10C more than other.
CoreTemp! EasyTune/DS3 sensors are total crap. ;)
Should I go lower than 1.3V, Im trying to get lower temps.
Sure as long as you can run some apps without the pc locking up. for exaple Orthos,etc...Quote:
Originally Posted by ClockCatcher
Processor: E6400 @ 3.7Ghz (week 27)
Motherboard: P5B Vanilla
Memory: Teamgroup PC5300 3-4-4-8
FSB: 463
Memory Mult: 1:1
vcore: 1.5 vdimm: 2.2
http://aycu09.webshots.com/image/292...3983484_rs.jpg
rgards
Nice one, Mascaras! You've ditched the DQ6, I see.
CPU-E6400@ 3700 MHz+BOX COOLER
MB:Gigabyte 965P-DS3 F6 Bios
RAM:SuperT 800 MHz 3-4-3-8,OC@ 5-5-5-20
Mem Multi: 1,1
Vcore:1,525 Vdimm:2,1
Your CPU must be cookin' ;) What temps are you getting with the boxed cooler and that OC?Quote:
Originally Posted by Fixt00l
53C in BIOS,full load goes 76C-78C:eek: :rolleyes: :stick:Quote:
Originally Posted by GAM
E6400 3.6GHz 1.408Vc air
E6400 L625A 3.6GHz 1.408Vcore
Scythe Infinity
Gigabyte DQ6
2048MB CellShock DDR800 :D
Only priority 7 since i was doning some work while prime was running. will test priority 10 later.
raiden
http://img151.imageshack.us/img151/6730/38523gx5.th.gif
Processor: E6400 @ 3.85Ghz (week 24)
Motherboard: Gigabyte P965-DS3 with bios F3
Memory: XMS2-6400C5 @ 5-5-5-10 2.1V
FSB: 482
Memory Mult: 1:1
vcore: 1.6V
vdimm: 2.1V
yep :DQuote:
Originally Posted by GAM
and its settings booting from bios , cause there is no SETFSB for P5B Vanilla yet .
with SETFSB and better RAM i think 3.9ghz can be done ;)
This CPU seems to have a lot of potential :
Temps@CoreTemp @ WC
http://img242.imageshack.us/img242/1...swq9rx2.th.jpg
with vcore default runs SPI 1M at 3352mhz :
http://aycu09.webshots.com/image/472...4935307_th.jpg
3300mhz@1.328v @ Orthos
http://aycu37.webshots.com/image/547...4599717_th.jpg
3570mhz@ 1.425v :D
http://img520.imageshack.us/img520/2...143vbc4.th.jpg
3615mhz @ 1.45v
http://img257.imageshack.us/img257/5...146vnv4.th.jpg
3700mhz@1.50v (booting from bios)
http://img178.imageshack.us/img178/4...0spivz2.th.jpg
lets wait , I hope that a SetFSB for P5B come out ;)
regards
Lets hope my E6400 will do better then my E6300 (7*500@1.4V).
:thumbsup: I'm jealous guys ;)
I gotta' try some more clockin' this weekend. I've been a bit :chicken: since I got my board back.
Mascaras, water just isn't fair :( . Those temps are excellent.
idiotic question guys, but where the heck do I force the memory to be 1:1 in BIOS?
Upgrade to BIOS version F6.Disable automatic faw control in BIOS.Try to set memory multi @ 2,5,then drop the CPU multiplier to 6,and then increase FSB to see how far memory can go.Finally,you should have the idea of what your RAM is capable of,and then try the CPU.Quote:
Originally Posted by GAM
P.S Thanks to Dinos22 for helping me with some advices.The memory multi was his idea,not mine.
Read your m/b's manual... ;)Quote:
Originally Posted by ssabripo
after modding my Bad Axe for 1.82v on the vMCH this is stable so far.
http://img287.imageshack.us/img287/5785/3650vi9.th.jpg7.imageshack.us/img287/5785/3650vi9.th.jpg][/url][/IMG]
That seems strange,with my GA-965P-DS3 and box Intel fan,I never needed to mod anything to get 8 X 463...
My results: E6400@3.2Ghz. See signature for details. That was just too easy ;)
I kick Core 2 Extreme X6800's ass on all benchs according to Everest, I like the idea ;)
I'm trying to clock my Ballistix @DDR2-1000 instead, got it to work at stock vdimm once w/ 3.2Ghz, but can't anymore. Need to play with that some more later. 1:1 FSB/memory gives awesome latency results though. Is someone running the ballistix faster than 4-4-4-12@800? I might try that instead of going to 1000.
This thing is flying... I'm doing tons of photo editing and it's just awesome. It's night and day compared to my previous rig (AMD64 3000+).
Maybe because u have a different chipset? :stick:Quote:
Originally Posted by Fixt00l
New to these forums and cpu overclocking thought i'd share my results.
processor: E6400 @ 3.4GHz
motherboard: P5B Deluxe Wifi
memory: Corsair XMS2 1GB PC6400
cooling: Scythe Infinity w/ 120mm 98cfm fan
FSB: 425
memory mult: 1:1
vcore in bios: 1.415
vdimm in bios: 2.25
pcie: 115
21c ambient temps: 35c idle / 43c load
<a href="http://img228.imageshack.us/my.php?image=cpuoverclock34ghzxstestep8.png" target="_blank"><img src="http://img228.imageshack.us/img228/8720/cpuoverclock34ghzxstestep8.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
<a href="http://img145.imageshack.us/my.php?image=cpuoverclock34ghzxstest2dx8.png" target="_blank"><img src="http://img145.imageshack.us/img145/7390/cpuoverclock34ghzxstest2dx8.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
<a href="http://img136.imageshack.us/my.php?image=cpuoverclock34ghzxstest3mn9.png" target="_blank"><img src="http://img136.imageshack.us/img136/6730/cpuoverclock34ghzxstest3mn9.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
<a href="http://img144.imageshack.us/my.php?image=cpuoverclock34ghzxstest4uj4.png" target="_blank"><img src="http://img144.imageshack.us/img144/2361/cpuoverclock34ghzxstest4uj4.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
Havnt run sp2004 for more than an 1 hour. Will test overnight soon. 3D benching and gaming are 100% stable so far, no random restarts.
Can't remember if I posted here or not
E6400 L624 1.425vcore
Corsair XMS2 6400 1x512 Cas5 5-5-515 @ 1040mhz
+.1 MCH +.2 DMM
http://www.ocforums.com/showthread.php?t=478861
Here's mine after a good lapping.
Here's mine, been testing and tweaking for over 8 hours now, seems to be stable at 3.3GHz :). Too bad my motherboard won't go any higher than 425, then again my RAM won't go any higher than 415 1:1...although I'm very satisfied with the RAM oc results, as it's cheap value RAM.
http://img213.imageshack.us/img213/8...ennavn3aw8.jpg
CPU: E6400 @ 3.3GHz
Motherboard: P5W DH Deluxe
Memory: Kingston Value DDR2-667 CL5
Cooling: Noctua NH-U12 w/120mm ADDA 16db fan
FSB: 413
BIOS: 1305
Memory mult: 1:1
vcore in bios: 1.35
vdimm in bios: 2.15
vMCH in bios: 1.65
PCIe: 100
23c ambient temps: 43c idle / 53c load
with P5B Deluxe Mod
ambient=20c
tower120 cooling
team ddr2_1000 1g*2
-------------------------
1.52v 3.87G pi_1m , ram 1:1 3-3-3-4
http://vic.expreview.com/attachment/1160140754.jpg
1.4v 3.6G sp2004, could be lower vcore, haven't much time to try :)
http://vic.expreview.com/attachment/1160200462.png
Here you go guys....This is working good so far now for me, so I will keep it!:)
I will keep these settings for 24/7 :
Vcore = 1.3875
Vdimm = 2.25
Vfsb = 1.4
NB = 1.4
SB = 1.45
fsb = 450, RAM:fsb 1:1, mem at 4-4-4-8-4-35
Anymore settings you can share?Quote:
Originally Posted by VictorWang
Vdimm,Vfsb,vMCH,vNB,vSB etc ...
I can hit 3.6ghz but i need more then 1.55V for it on WC setup and my NB get so hot i can't touch it. (need active cooling for it)
Anyway I still need much of testing but i'll post some results soon.
Here´s mine :)
P5B Deluxe stock
Vapochill LS stock on cpu & WC on chipset
1,63v (1,58 in win) 4ghz 1h Orthos
http://img169.imageshack.us/img169/1...me1hnk2.th.jpg
Processor: E6400 @ 3.6Ghz (max 3.7ghz @ 1.52v)
Motherboard: P5B deluxe
Memory: Corsair 2 x 1 GB PC6400 @ 4,4,4,12 900mhz
Cooling: Watercooling
FSB: 462
Memory Multi: 1:1
vcore: 1.43
vdimm: +.3v
pcie: normal
gmch: normal
Idle 47C
Dual Prime Load 61C
Dual Primestable
Nice overclock :) .Quote:
Originally Posted by Riverna
Quote:
Originally Posted by Riverna
nice... 1.43vcore in BIOS or probe?
Processor: E6400 @ 3.6Ghz
Motherboard: Asus P5B Deluxe
Memory: Teamgroup 2 x 1 GB D9MGH PC2-6400 @ 4-4-4-15 980mhz
Cooling: Swiftech Apogee Watercooling (dual 120mm heatercore)
FSB: 450
Memory Mult: 1:1
vcore: 1.5
vdimm: 2.1
pcie: normal
Idle 29C
Orthos Load 51C (stable 9h+)
My thanks to Gautam, dinos22 and freecableguy for helping me acheive the overclock.
Can you post all the bios options you changed to achieve the overclock?Quote:
Originally Posted by SunTzu69
Because I have about the same setup but I need +1.55V to get 3.6ghz stable.
I remember simply changing the options like FreeCableGuy suggests in his P5B Deluxe thread. Really nothing more at all, so far. I hope to get the cpu further when I have some time to experiment.Quote:
Originally Posted by 187(V)URD@
i need the vdroop mod but here is what i am currently running
CPU: E6400 @ 450x8= 3600 1.5v in bios( more like 1.425 actuall)
P5B Deluxe
Big Typhoon
Swiftech NB cooler
Between 1.55-1.8vmch
450 4-4-3-4 with like 2.3v or something (not pushing it at all)
CPU-Z and AI Suite :)Quote:
Originally Posted by harpyboy
guys....check this out!! these e6300's OWN!!!:woot: :toast: :eek:
lowered Vcore to 1.35 from 1.385, raised fsb to 460 (from 450), and I get a more stable run (2hr Ortho), lower Temps (by 1-2C), and faster times!!! whooooohooooo
go C2d, GO!:D
cool, mine shows ~1.37v in CPU-Z under full load... 1.4v idle......Quote:
Originally Posted by Riverna
3600Mhz is orthos stable for 25 minutes only. And goes about 61C on water... can I still go higher?
Hey everyone, I've been reading these forums for a few weeks now abecause I just built myself a new gaming system with an E6400. Thanks to a thread on this board about the Gigabyte S3 motherboard, I decided to get one myself. Today, I overclocked my E6400 using the F5 version BIOS, which Gigabyte says improves Allendale OCing. Without further ado, here is my info and screenshots (keep in mind this is my first time ever OCing a CPU):
Intel Core 2 Duo E6400 L624 @ 8x400 (3.2GHz) 1.32VCore
Gigabyte P965 S3 w/ F5 BIOS
2GB Patriot DDR2 667 4-4-4-12 RAM @ DDR2 800 5-5-5-15 (I have a Q about this later in the post)
eVGA 7900GT @ 525/1400
CPUZ validated:
http://valid.x86-secret.com/show_oc?id=129199
Dual super Pi 32M run:
http://img.photobucket.com/albums/v1...erpistable.jpg
3DMark06 5485:
http://service.futuremark.com/compare?3dm06=546505
The only problem I'm encountering is if I try to manually put my RAM timings to 4-4-4-12, the computer will post and go through BIOS fine, but at the screen where it's about to go into XP, it'll just sit there as if there's no boot device (I know this because that happened before haha). Once I change it back, it goes fine. I'm not too worried about a small latency change, but I'm guessing this is just a BIOS glitch.
EDIT: Almost forgot to mention that my heatsink is an Arctic Freezer 7 Pro.
Quote:
Originally Posted by kingcars
That's odd... I would think those Patriot sticks would be able to do 400, 4-4-4. Did you try upping the Vdimm?
Oh and another thing, when OC'ing... start out with a bit more Vcore than you really need then work your way back down. If it was me I'd be at 1.425 and 2.4Vdimm looking to identify the weak link. You could probably do 430-440ish at 1.43v... but you need to isolate if it's the ram or not.
Well everything works fine unless I change the RAM timings. I might try upping the VDIMM to 1.9, but it's pretty odd since most people dont have problems using stock voltages with this RAM. As for now, I'm going to run the comp as-is for a while and see how it does for 24/7 use. In a week or so, I'll start doing my final tweaking. Thanks for the info.
EDIT: What do you guys recommend as a max safe voltage for 24/7 use?
one more update:
http://upshizzle.com/gallery/albums/...on 3304ghz.jpg
I'm just starting the orthos 2nd part of test now, but so far so good...I''l post an update as it goes longer if you want....let me know.
http://upshizzle.com/gallery/albums/...3ghz_13006.jpg
http://upshizzle.com/gallery/albums/...006_orthos.jpg
sory but you post in the wrong thread , this is the E6400 results of E6400 :DQuote:
Originally Posted by ssabripo
[ON TOPIC]
got new P5B deluxe today , my 1st stabilt test im runing:
http://aycu05.webshots.com/image/460...9753339_rs.jpg
Nice OC you got :slobber:Quote:
Originally Posted by mascaras
How many volts going to the cpu for 3.4ghz?
I need 1.475v in bios for 3.4ghz :stick: .
Windows shows 1.440v. Vdroop owns on my p5b-d.
update
3500mhz@1.42v
http://aycu09.webshots.com/image/536...4289039_rs.jpg
hey i have been stock at 422x8 for a while...Right now I am at 425x8, voltage at 1.425 (vdropp down to 1.38) and Corsair 6400 at 2v...
I think the trick was to drop my RAM timings a tiny bit - from 5-5-5-12 to 5-5-5-15. That seems to have fixed my reboot in Orthos after about 5 mins.
So if you got the cheap Corsair try loosening timings a bit maybe...
This proc is so bleeping impressive. I am stressing it by running Orthos at the same time as I play Call of Duty 2 - and guys I have NO FPS DROP!
THAT'S INSANE!
Back to hunt the flag...
its 6 AM here this is my last update before go to bed :D
ORTHOS 1H 30m Small FFTs ;) 3505mhz@ 1.43v
http://aycu26.webshots.com/image/502...8107210_rs.jpg
GREAT CPU :D :D :toast: :toast:
more test tomorow , cya guys
regards
@mascaras, seeing your post and updating DQ6 BIOS to F6 I thought I would try it out. It ran 438@3.5GHz 1.42v as you. Stress dual prime95 sml/lge ffts and IT rebooted after <10mins. Cores hit 60c@28 ambient.Quote:
Originally Posted by mascaras
Now stressing (sml/lge) for 10mins 435@3.48GHz 1.42v (1.38v). Temps hovering up to 60c. vDimm +0.4v @ 44412. Everything else 'Normal'.
...looking good! ;)
im at 3600 mhz and 1.55v with a asus p5w dh
Processor: E6400 @ 3.62Ghz
Motherboard: Asus P5B Deluxe Wifi
Memory: Crucial ballstix 2x512 DDR667 4-4-3-3-8 902Mhz
Cooling: Swiftech Apogee/MCP650/BIX II/Micro res
FSB: 451
Memory Mult: 1:1
vcore: 1.45
vdimm: 2.25
pcie: normal
gmch: 1.45
Idle 42C
Dual Prime Load 55C
Dual Prime Stable.
EDIT sorry
How much Do i expect from a Week 27 E6400 cooled by Ultra-120 :D. Ambient Temp will be <20C. :slap:
Mobo will be P5B deluxe with TeamXtreme ddr2-800 2gb.
I would also like to know what to expect from my E6400 - L626A293 - anyone care to take a guess or tell me what they got - I plan on getting the Vigor Gaming TEC cooler<-I Know, I Know...
@ANP and TheGoat Eater everyones overclock varies from chip+mobo+ram combinations.
But a safe bet would be 3.2Ghz to 3.4Ghz
If you take a close look you will notice what the Minimum Overclocks are.
Right now, I have 2GB of Patriot 5300 ram overclocked to 438 FSB 4-4-4-9 STABLE (for 12 hours on the ram .... CPU I did before with small FFTs) Now, when I overclocked to 3600 Mhz on my CPU, the small FFTs worked for 12 hours ... however, the RAM isn't stable at 4-4-4-9, 4-4-4-12, 4-5-5-12, or 5-5-5-10 .... what should I do? It won't boot if i increase the voltage to 0.3 (apparently 0.2 is the max now on the DS3)
I am sorry for asking a stupid question but these Intel chips are still to me and wanted to sound my question but I have booted into windows at 3.7 and am now benching at 3.5 but it likes 3.2 a lot better I think - gonna slap a silverstone 120mm fan on my scythe infinity and "GO FOR GOLD" -lol:banana:Quote:
Originally Posted by Vikodemous
Thats Really nice. Ambient temp ??Quote:
Originally Posted by TheGoat Eater
case open mobo @ 34C and CPU @39C (AC on and off) the Vcore is 1.43v but is set higher in BIOS. umm yeah I'm at 3.5 now- ran dual stress prime for a bit and super pi 1M just as a quick check. I know I need to do it longer :slapass: but am currently tweaking just about everything:banana:Quote:
Originally Posted by ANP !!!
Funny thing is that 3dmark06 and stressprime are showing 4000MHz LOL::shocked:
Asus P5B-Deluxe
1.55 Vcore:D
All Air
Notice the FSB reported by Sisoft and CoreTemps. This cpu is bugged with 7 multi
http://www.xtremesystems.org/forums/...1&d=1160756480
http://www.xtremesystems.org/forums/...1&d=1160756480
http://www.xtremesystems.org/forums/...1&d=1160756480
Quote:
Originally Posted by TheGoat Eater
Don't be silly my friend, It's not a stupid Question. ;)
Quote:
Originally Posted by TheGoat Eater
mine is week 27 --- L627A730 ;)
they are not HOT ----- with WC ||| Coretemp >> 26c core 1 /// 29c core 2
can run SPI1M 3352mhz @ Vcore default(1.30v)
3800mhz@1.55v
and im testing now stability ---- 3500@1.43v already passed , more tests soon .
Now im testing same 3500mhz but lower vcore ---- 1.42v ---- for now No problems ( 48c FULL Core Temp) :D :
http://aycu14.webshots.com/image/361...4863963_rs.jpg
regards
Quote:
Originally Posted by railer
Actually Sisoft & Core Temps may be correct. Cpu-z is reporting what you input into bios right?
Except you may notice vcore reading in CPU-z is wrong, you should know.
Your using e6400 default multi of 8x right?
This may sound nutty, but, here's why, when lowering multi it affects straps in the cpu, just like when you use a ram divider e.g. 2:3 or 4:5.
Now think for a moment, the only cpu in the series x6800 (super expensive) can clock up and down whereas the others only down, So, that means with x6800 you can change multi up and down without effecting NB, SB, FSB etc.
But, the others (e6300 etc.,much= less costly) can only clock down, as well when you clock down with these chips it directly effects NB, SB, FSB etc., which means solve problem #1 ( changed FSB clock), but what about problem #2 (the change #1 changes the NB clock), which effects problem #3 (the ram clock).
So go to windows desktop and right click properties on My Computer and see what the Cpu clock is, this might surprise you.
imagine 4.5ghz (4x566Mhz in Sandra 1:1 = 4x566 = x2 = 4.528ghz)
and
ddr-1132 ram (4x283 in Sandra)
HOLY CRAPPOLA!!!!!!!!!!
how do you guys think my setup will do? before i had to RMA my motherboard and RAM i got to 3.4ghz stable. You think that is the highest I should go for 24/7 or 3.2? I guess it depends on temperature but what would be a realistic limit for 24/7.
Intel e6400 2.13ghz @ 3504mhz 1.475v (438x8/1:1)
TT BigTyphoon // Orthos/Prime/Memtest Passed
Gigabyte 965p-DS3 BIOS F7
X1900gt @ 620/670
2x1gb OCZ DDR2-800 PC6400 PLATINUM (2.0x 5-5-5-15)
2x400gb seagate barracuda 7200.9 (RAID 0)
my max__
[L=http://valid.x86-secret.com/show_oc?id=129840]http://valid.x86-secret.com/show_oc?id=129840[/L]
here's my max before the system wont boot __\/
http://img.photobucket.com/albums/v3...oLix/cpu-z.jpg
http://img.photobucket.com/albums/v3...rthostemps.jpg
I'm debating on lapping to lower temperatures, I'm 2.5 hours into orthos and my temps are varying from 63-69, my idles are about 53-55... I have speedstep and all that enabled though. I have an electric bill to worry about :P.
p.s. how do you add volts to an ATI card? I've always used NVIDIA cards and my OC needs were met without needing it. But this card is seriously low end, I got it for 100$ from a friend... I just need something till dx10 comes around... but this thing doesnt even artifact it just turns off my computer when I over overclock it.. so I'm thinkin it needs voltage or something.. lol sorry if this is off topic.
Quote:
Originally Posted by mascaras
damn that little of volts and orthos stable... mines at 1.525 I believe to be orthos friendly :[
E6400 @ 3600Mhz L626A301
vcore=1.45v bios = 1.4v CPU-Z/AsusProbe
Watercool: Apogee. BIX
mine loads at 60C ambient 28C, kinda hot IMO but is rock stable..... do you guys think the temp is incorrect? I touch the waterblock and it felt at most 40C to me......
for the voltage 0.0125v below 1.45v makes it only orthos stable for 20 mins......
http://img213.imageshack.us/img213/6043/captureii8.png
Dude, mine is L627A709. I think that atleast makes us cousins or something.Quote:
Originally Posted by mascaras
For what it's worth I'm running at 8x400. Only had the system about 5 days and accidentally ordered PC5300 RAM. Waiting for DDR800 to arrive, will push further with that.
well i HIT the Max with this RAM :(
with 4:5 they can run DDr1090 but 1:1 they dont run + than 467mnhz , dont know why :
E6400 @ 3735mhz@1.52v 1:1 & ASUS P5B Deluxe
http://img131.imageshack.us/img131/6593/3735pi8.jpg
and my MAx with vcore Default :
E6400 @ 3352mhz @ Vcore default
http://img171.imageshack.us/img171/3...defaultop5.jpg
thats all for now
regards
Cooling ?? air or water ??... Awesome OCs tho..
im with 100$ watercooling :D
CPU ---- NexXxos XP silver
VGA---- Twinplex Pro
Radiator --- Airplex Evo 240
Pump---- Eheim s1000 station
regards
yo mascaras...how about helping a brotha out with some WC tips?! :fact: :toast:Quote:
Originally Posted by mascaras
think I'm gonna go WC and pump this baby up to 3.5ghz ...gimme a BOM of your stuff and DIY tip
WC wont help u much.. u need is a higher Multi cpu.. Just dump the WC, n get a E6600 or E6400 atleast.
I just ran Orthos for an hour and 40 minutes; stayed rock solid. I only stopped because I wanted to play some games :) .
http://img.photobucket.com/albums/v1...thosstable.jpg
Load temps stayed around 48-55C; the fan would turn up when it hit 55C, which would cool it down to 48C, then it would slow down and the temp would rise again. Just kept doing that over and over. If I run the test again, I'm gonna just run the fan at 100%. But yeah, I'm very happy with my OC. I bet I can go further too, since my vcore isn't high (I havent even found minimum required vcore yet...).
Here goes mine !
E6400 - L624A727
Max I can get for now with 1,66v BIOS air'ed with Scythe Ninja Rev.B :O
http://xs215.xs.to/xs215/07211/E6400...eal.PNG.xs.jpg
http://valid.x86-secret.com/show_oc?id=199989
http://img179.imageshack.us/img179/6015/3300iz5.jpg default voltage with C1E ane EIST Enabled, 1000% stable. Idle temps 26C. Full 2 core load 53.
3400Mhz with 1.350Vcore also stable.
http://valid.x86-secret.com/show_oc.php?id=238723 maximum o/c for now, memory is holding this chip back. can do only 920Mhz'ish.
Must wait for my new case,mobo, wc, and memory ;]
What are you cooling that w/? I've very similar temps on a TRUE w/ Scythe 1200RPM...
http://img.photobucket.com/albums/v212/jodiuh/c.jpg
ambient 24C
3200Mhz @ default voltage
abit ip35 pro @ 400Mhz
@ Jodiuh , Scythe Ninja Rev.B, with 120mm @ 900rpm, in the rear of the case are 2x1 stacked 120mm @ 5V to pullout as a turbine , all on ABIT AB9
Kick :D !
Got a new 1M pi score
http://img172.imagevenue.com/loc1008...123_1008lo.JPG
Finally sub 15 :yepp:
E6400 @ 3.2ghz
micron d9gmh 2gb @ 800mhz
gigabyte ds3 rev 1.0
vcore: 1.28v
temps: idle 43, load 55 with tuniqtower badly installed. Had 33c idle and 51 load with my e6300 3.3ghz higher vcore before, so i think i can get the temps a bit better.
this is stable on orthos 8 hours at 118 f: air cooled
http://i177.photobucket.com/albums/w...zpix/mycpu.jpg
This thread is for E6400
Nice OC though, they all seem to reach 4Ghz with ease
Dude! Come into our thread and wag that 4G around...
:D
I Was running 4.25 g for a few days and the asus atomic sounding alarm went off in the middle of the night with orthos a little over 6 hrs . it got a little hot but all my fans wasnt running at full and it only stayed hot for a min after i cranked them all up, 5 case fans all 40mm 2 in front 1 in back and 1 on side and 1 on top, still kinda quiet but the speed is worth it, i can encode a dvd 9 to dvd5 avi to dvd in 5min 30 sec
i had to build this buying 1 part every paycheck,get paid fri then wait for mon for newegg to process my order lol
Asus p5e mobo
4*1gb crucial balistix ddr2 1066 (pc2 8500)
E 8400 wolfdale 45nm
windows xp pro 32bit
extreme fxII sound card
logitech z5500 surround sound
2 wd 750 gb hdd sata with raid 10
Thermaltake CL-P0378 90mm CPU Cooler /arctic silver compound
Radeon HD 3850 55nm 256MB video card
man i cant find your threadQuote:
Originally Posted by Jodiuh
http://i.data.bg/08/03/14/853925_t.jpg
Cooled by Scythe Ninja Rev B. + 2x120mm Spire 107CFM :D