Goodhead...whats with the pic on the windowseal?
Printable View
Goodhead...whats with the pic on the windowseal?
wow nice temps! :)
Here's my VapoLS with an Antec P160
http://www.anza.is/filez/oli/ffletchs.jpg
fFletchs
I really like how that case looks with the LS, nice and blue with the lights as well :cool:
Nice work ffletchs :)
G
Beautiful ls case! Must be loud as hell though :(
Beautiful ls case! Must be loud as hell though :(
thanks :cool:
The LS is not silent but its not that noisy... If you have a silent watercooling system then going to the LS will seem noisy... but if you're used to a standard air cooling system its not loud
fFletchs
Mine :)
Now all I need is an 939 socket kit (I guess) so I can move my Mach I to a AThalon FX platform
Prometeia frozen Athalon XP 4000+ CPU (PR rating,520mhz overclocked 3200+) -30 celcius
Abit NF7-S 2.0 w/watercooled NB
Watercooled Radeon 9800 Pro256mb 440/371
2watercooled WD Raptors SATA RAID, 1 WD 120gbSE
1gb Corsair XMS3500@420mhz
S.B. Audigy 2 w/CambridgeDTT3500 Digital 5.1 system Asus 52x Burner,Sony DVD
http://www.fallnangels.de\pics\SLI-Rig.JPG
Did you cut the window in the LS yourself?? There is suppost to be some air holes in the side cover to allow air to pass through for ventalation, is not not a concern??
Cool job with the copper pipeing.
Its not an LS, its Mach1, if you look at the front of the unit the holes are smaller than those on the LS, and if you look at the size of the unit it is too tall to be an LS.
And the microfreezer really gives it away ;)
I have to agree about the piping though, very tidy piece of work.
G
Nothing special...just a VapoXE
http://users.rcn.com/impala71/DSCN0293.gif
http://users.rcn.com/impala71/DSCN0288.gif
Beautiful cases :)
wow dipstick...thats pretty tite, especially the window...dragona ball?
deleted
ok its a 1/6HR compressor using 218w out of a fridge/freezer using r290
so temps arnt the best, but its me first
idle -28c and load -23c
:thumbsup:
nice job sharp :thumbsup: btw what is that second condensor/rad doin in your case???? (supporting the hdd?)
lol, that's really neat sharp
so nice and compact
hey sharp i can see 2 compressors in that bottom enclosure are you currently using both or is that for the GPU?
:D I meant to use it for this dd ,but 120mm 220v are too loud,so i buy another one with 200mm elipse and speed reducer. Small one i will use for gpu.Quote:
nice job sharp btw what is that second condensor/rad doin in your case???? (supporting the hdd?)
Thx ;)Quote:
lol, that's really neat sharp
Botton enclosure looks weird on that picture,like there are 2 com. but its only one :)Quote:
hey sharp i can see 2 compressors in that bottom enclosure are you currently using both or is that for the GPU?
I love all of this phasechange action. :) I feel bad for trying to rid myslfof the mach2. I guess Im going to have it modded with a bakerblock and that way ill be able to mount it on all future boards without any problems really.
sry for 2x post OOL was a bit lagged :confused:
I love all of this phasechange action. :) I feel bad for trying to rid myslfof the mach2. I guess Im going to have it modded with a bakerblock and that way ill be able to mount it on all future boards without any problems really.
I'll take a bob eachway with my Black Phase *Work in Progress*
Here is my main rig, only a vapochill SE, but it gets the job done ;)
NB and GPU is watercooled.
http://s01.imagehost.org/0238/DSC00689.JPG
http://s01.imagehost.org/0246/DSC00690.JPG
http://s01.imagehost.org/0238/DSC00694.JPG
man, good work. Your machine is very pretty.
cheers
:toast:
Cheers m8 :)Quote:
Originally Posted by Marvin
Here's my Lian-Li Mach II mod that in the tradition of the 'Q-cars' I have dubbed 'Q'. I got the cooler second hand and started modding my case straight after getting it. The fit is to 0.5mm tolerances and caused a lot of stress but is fairly complete except for pulling it all apart so I can fit a 3,4C once I get it, doh. The current chip is a fairly slow but game stable 2.4C.
http://mazer.sytes.net/Q/QLeft.jpg
More pics here: http://mazer.sytes.net/Q/
wouldn't be fun having to change CPUs with that thing inside the case
What about your case temps wouldn't they go incredibly high with the mach ii in there?
The Wavemaster has not been cut yet so the the case is not level at.... this is just a teaser for the time being
:)
You're not wrong, but that doesn't happen often at all unfortunatly $$$ :)Quote:
Originally Posted by `schr0et
Actually temps are unchanged at idle and rise about 7*C above what I would previously get over a long period of gaming at 100% load. It was because of this concern that I have added an extra fan at the rear of the case and changed to Thermaltake Smartfans with higher CFM. These 2 rear fans replace the single 120mm prommie fan and do a good job. Actually, during my last assembly the top blowhole fan became disconnected and I have been too lazy to reconnect it. Once I reconnect it, I would say that the internal temps will not be much of an issue at all.Quote:
Originally Posted by `schr0et
Loooks better now its mounted properly :)
Whats your opinions?
Ive never seen the Curvey lines and the straight ones used together :)
hi'ya
just a quick pic of my vapochill XE, i have moved the psu up in to the top and have water cooled n/b and g-card with a zalman res1, blackice pro2 rad, xice pcp25 pump, dangerden maze4 N/b block and NV68 graphics card block,,,,you can see the rest in my sig.....
...can get 14025'3d03 and 6045'3d05....
http://homepage.ntlworld.com/adam.ne...x1/caseout.JPG
its a 1HP rotary running bbq propane at 10HG at full load, idle is below -50c but i need new gauges to tell exact temps, (only read down to -50c)
http://xtremesystems.org/forums/atta...id=17749&stc=1
and prime 95 for fifteen mins
top temp is evap, bottom temp is 6" from accumulator
http://xtremesystems.org/forums/atta...chmentid=17679
hey guys, im kinda a lurker here (im more an ocforums guy) i just got a Prometeia for $420 on ebay :D partly for my birthday, wanted to add this to the phase gallery here, check it out-
This picture is not mine, but I was sent the pic... in my opinion its one of the sweetest case/MAch II mods ive ever seen!!
wow, it is.
Its a Coolermaster 201 I think, with another Coolermaster 201 that has been cut in half, inorder to make room for a Mach I.Quote:
Originally Posted by Aphex_Tom_9
The Mod and the finish are just awesome tho... that match up sooo well!!
come on guys there are many more cases that look that good ;)
this is just one of the best looking:
http://home.wanadoo.nl/a.p.versteeg/prom-li-pro
Tom Versteeg has done some kickass casemods ^_^
yeah, ive seen his work, amazing stuff
Quote:
Originally Posted by The Byter
Very nice but maybe I would like to see alot more than -44 on the evap with a condenser fan that will have to be held in place or it will fly away. I mean I get -41 -42b with a mach one evap temp. Nice work though I am always impressed when you biuld your own. Just asking what did it cost you??
mach's temp probe arent accurate m8..
The cost ? around 200$~
Wow... Nice one there Byter, how long did it take for you to make that one?
200$~~ awesome
around 2 years from start to finish ....
I learned all about it, ordered the baker block from the US, made friends with the ac guy ;)
It was a long journey
Quote:
Originally Posted by The Byter
Wow thats great!! very nice.
Versteeg is a PRO... they ask him for shows etc.Quote:
Originally Posted by Vandread
Here is mine
Well here is my Prom-Lian Li :d
Thanks TheDude for this beautiful piece of alu :D.
http://www.xs4all.nl/~famchow/mods/Prom_Li/Prom_Li.jpg
http://www.xs4all.nl/~famchow/mods/P...Speedfreak.jpg
kakaroto ,
Turned out real nice! Good job!
:toast:
I just setup my phase change the other week and my case (thermaltake Xaser III didnt go to well with it) so I took it apart until I get a bigger case:
http://img.photobucket.com/albums/v3...neverlearn.jpg
Its Fugly the now but I will work on beuty part soon.
haha
"dude, what's all that stuff under the table?? a computer? looks pretty cheap, betcha my dell can beat it...oh no you say? you're on!"
Thanks for the kinds words beacause its mine :D but its a mach1 ;)Quote:
Originally Posted by Cashman
I'm not aware of anyone else who has done a DoubleCoolermaster version
The build goes back to 2002 can be seen here.... (Also featured in PCformat Magazine).
http://www.brittech.co.uk/casemod.htm
orginal pic... http://www.brittech.co.uk/mypc.jpg
and the whole setup.... http://www.brittech.co.uk/pc1.jpg
lol... small world eh!!
Glad you spotted it tho... But I have to admit that your case and the orac3 are the best two Ive ever seen!
I really would love to see the same doen to two Coolermaster Wavemaster cases... unfortunately I have not enough skill to complete the job to your standards!
Very well done tho mate, its gorgeous :)
I'd love to do a wavemaster as well have thought about it, but unsure how best
to make the base that looks right with the topunit.
Believe be I took my time something like 3months so i did not make any stupied
mistakes and alignment was hard.
The Coolermaster cases have raised ridges on the base inside so all the mounting holes
had to be re-done, then new bolt holes on the Prommy unit and Coolermaster case.
Scary stuff esp when you think how much these cases sold for back in 2001/2002
Ended with an rather interesting sound as well due to the sound insulation stuff used as well, it has this loverly breathing type sound to it.
Heavy though took it to a Lan once never took anywhere else since lol.
very nice... that's what i want to do with my mach2 bend the hose that way but scared :banana::banana::banana::banana:less about breaking the hose :oQuote:
Originally Posted by Gav
my 2 stage phase change
very nice zyx what gases is it running?
what temps ya getting.
thanks man in first r507 and in second r503Quote:
Originally Posted by kayl
temp realy i dont now. i dont have Thermometer in evaporetor. and i dont believe the bios
as long as it's cold right? lol
i see at 3240+mhz at the spi 32m the dfi with speed fan 4.18 it shows me -16 with 1.84volt. but i dont believe what dfi sai to me.
bre si thodori einai dynaton na to exeis dipla sto kalorifer?
lol e? its ok christo (anigo parathira)Quote:
Originally Posted by Unseen
man you should get a temp gauge so ya can tune that cascade
503 boils at -87c whats 2nd stage low sides pressure
dt200's are quiet cheap and accurate
This is my Custom made system and what it can do :D
http://fotos.miarroba.com/fotos/f/d/fd12a592.jpg
http://episode.serverdelsur.com.ar/Spika/silencer/6.jpg
http://fotos.miarroba.com/fotos/4/0/403eb3f1.jpg
1/3 hp comp lbp for r12 regassed with r502, custom condenssor and chily1 evap with my enclosure.
Rig in my sig.
very nice and nice pi score.
That's cool :toast:
What are your idle and stress temps?
-38c/-30c in the evapQuote:
Originally Posted by Adasi
Anyone seen this at extremeprometeia it's called a baker extreme it's a regassed mach2 GT R507 with a baker head on it and sexxxxxy black alu kit mmmmmm
http://www.extremeprometeia.com/PICS/baker/mb1.jpg
Wow ZYX that is the first "white" cascade I've seen! Great work!
Fatty that looks damn slick!
Not mine mate extremeprometeia's work wish i did have one but :(
ooh, nice nice
here is my homemade single stage...R404 1/4 compresor with elevens evap.
http://briefcase.pathfinder.gr/downl...0/P1010001.JPG
http://briefcase.pathfinder.gr/downl...0/P1010004.JPG
http://briefcase.pathfinder.gr/downl...0/P1010008.JPG
http://briefcase.pathfinder.gr/downl...0/P1010011.JPG
wow, that's nice.
that first pic scares me tho...
whitewolfgr thats one awesome single stage cooler !
I want photos please
Anyone seen this from extremeprometeia they say it's the first of perhaps many chilly1 extreme's but this isn't finnished yet but looks nice I think I need one
http://www.extremeprometeia.com/PICS/baker/chily1.jpg
The full article is HERE
Here is a gaming rig that i buildt for dpa :)
http://home.online.no/~kbudalen/dp%2...ferdig-011.jpg
The GFX prommy is dual evap for SLI card's.
fatty- heh, nice sleeving on the hose.
overklokk- ...so beautiful...
Here is one photo with prommie on card just for benching :D
A couple of pics of my main rig.
Here's mine:
Baker made R22 rotary powered CPU cooler. It's a 10K BTU compressor with a Baker special edition block.
http://virtual-octane.net/cooler/cooler6.JPG
Sweet! very nice rig...nice and clean looking! Are you thinking of encasing it?
(btw...please ask Nuclear to contact me if you talk to him...thanks)
Fatty....here's a finished pic that was sent me...nice looking rig :up:
and heres my baby :rolleyes:
http://home.online.no/~kbudalen/dp%2...ferdig-011.jpg
Thats pretty cool Overklokk stacking the vapos, I was thinking about buying one and hooking it up to my ATI. How hard is the mounting? :)
Heres a few pics of my current and past projects, current one is a 1/5th hp inside the Lian Li.. All using r22 and self made evaps..
Couple more pics...
Thinking about making a small 1/12th hp unit to go in the front of the case to cool my X800XL... Case has so much room :D
Some very nice mods there Eradicator! :thumbsup:
Thanks for sharing your ideas and your work...well done :toast:
Thanks TheDude, this stuff is very addicting.. When time and money permits, I hope to try my hand in making a cascade or two..
damn that baker looks familiar! lol :)Quote:
Originally Posted by Frost_Bite
Small update on my system, added the gpu cooler...
nice job cramming those vapochills in there! It's really professionally done and clean too :toast:
I dont think this coolers is vapos hehhee,btw nice job =D
I just assumed, it could be a custom job tho. Either way really sweet :D