*****Official***** DFI NF4 ultra-D first look

DFI PC Health Status :toast:

Code:

---

CPU Core  Voltage          :
 LDT Bus  Voltage          :
 ATX +3.3V Voltage          :
 ATX +5.0V Voltage          :
 ATX +12V  Voltage          :
 Chip Set  Voltage          :
 DRAM 2.5V Voltage          :
 ATX +5VSB Voltage          :
 Battery  Voltage          :
 CPU CORE Temperature      :
 PWM AREA Temperature      :
 CHIP SET Temperature      :
 CPU FAN  Fan Speed        :
 FAN 2    Fan Speed        :
 CHIP SET Fan Speed        :

---

DFI Memory Option

Code:

---

Command Per Clock  (CPC)
 Auto 
 Enable
 Disable
 

CAS Latency Control (Tcl)
 Auto 
 1.5 
 2.0 
 3.0 
 3.5 
 1.0 
 2.5 
 4.0 
 4.5

RAS# to CAS# delay  (Trcd)
 Auto       
 00 Bus Clock
 01 Bus Clock
 02 Bus Clocks
 03 Bus Clocks
 04 Bus Clocks
 05 Bus Clocks
 06 Bus Clocks
 07 Bus Clocks

Min RAS# active time(Tras)
 Auto       
 00 Bus Clock
 01 Bus Clock
 02 Bus Clocks
 03 Bus Clocks
 04 Bus Clocks
 05 Bus Clocks
 06 Bus Clocks
 07 Bus Clocks
 08 Bus Clocks
 09 Bus Clocks
 10 Bus Clocks
 11 Bus Clocks
 12 Bus Clocks
 13 Bus Clocks
 14 Bus Clocks
 15 Bus Clocks

Row precharge time  (Trp) 
 Auto       
 00 Bus Clock
 01 Bus Clock
 02 Bus Clocks
 03 Bus Clocks
 04 Bus Clocks
 05 Bus Clocks
 06 Bus Clocks
 07 Bus Clocks

Row cycle time      (Trc):
 Auto       
 07 Bus Clocks
 08 Bus Clocks
 09 Bus Clocks
 10 Bus Clocks
 11 Bus Clocks
 12 Bus Clocks
 13 Bus Clocks
 14 Bus Clocks
 15 Bus Clocks
 16 Bus Clocks
 17 Bus Clocks
 18 Bus Clocks
 19 Bus Clocks
 20 Bus Clocks
 21 Bus Clocks
 22 Bus Clocks

Row refresh cyc time(Trfc):
 Auto       
 09 Bus Clocks
 10 Bus Clocks
 11 Bus Clocks
 12 Bus Clocks
 13 Bus Clocks
 14 Bus Clocks
 15 Bus Clocks
 16 Bus Clocks
 17 Bus Clocks
 18 Bus Clocks
 19 Bus Clocks
 20 Bus Clocks
 21 Bus Clocks
 22 Bus Clocks
 23 Bus Clocks
 24 Bus Clocks

Row to Row delay    (Trrd):
 Auto       
 00 Bus Clock
 01 Bus Clock
 02 Bus Clocks
 03 Bus Clocks
 04 Bus Clocks
 05 Bus Clocks
 06 Bus Clocks
 07 Bus Clocks

Write recovery time (Twr) :
 Auto       
 02 Bus Clocks
 03 Bus Clocks

Write to Read delay (Twtr):
 Auto       
 01 Bus Clock
 02 Bus Clocks

Read to Write delay (Trwt):
 Auto       
 01 Bus Clock
 02 Bus Clocks
 03 Bus Clocks
 04 Bus Clocks
 05 Bus Clocks
 06 Bus Clocks
 07 Bus Clocks
 08 Bus Clocks

---

There are many more... too lazy to check them all
Nice bios... oskar wu :toast:

:D THX OPP ;)

@TICTAC:

Why don't You ask OSCAR about the embeddet thingies.......,You're not so far away :banana:

:toast:

For me oc is just for benchmarking...simple (and no memtest, pifast etc...those are for the labs). As long as it stable and can finished benching with the highest vcore/htt/fsb and highest core/mem on vid. card then is ok. :toast:

Quote:

---

Originally Posted by HARDCORECLOCKER

:D THX OPP ;)

@TICTAC:

Why don't You ask OSCAR about the embeddet thingies.......,You're not so far away :banana:

:toast:

---

Hexus PiFast 4.3 in dos kernel would be cool :toast:

OPP, nioce put, you're quite right, except for that memtest. If you're looking for a 24/7 stable rig, you simply need it when you OC.

Quote:

---

Originally Posted by Alexandrus

OPP, nioce put, you're quite right, except for that memtest. If you're looking for a 24/7 stable rig, you simply need it when you OC.

---

Gotta 24/7 rig right here at 270x10, runs flawless.

OPP

Hey, why you guys all want to go back in DOS?:D

Seriously I dont think we need those. The challenge is to be able to get it stable for the bench, which runs in windows. If it is stable DOS who cares?

Quote:

---

Originally Posted by skate2snow

Hey, why you guys all want to go back in DOS?:D

Seriously I dont think we need those. The challenge is to be able to get it stable for the bench, which runs in windows. If it is stable DOS who cares?

---

Well said my overclocking brother :toast:

OPP

Quote:

---

Originally Posted by goddh0r

finally i discovered whats going on:

the dfi got trouble using dividers somehow, if i go for 10x280 and mem@333 its a nogo, bluescreen PFN_LIST-CORRUPT, if i set the mem back to 400(which i didnt try before, cuz i thought well with ddr333 im on the safe side anyways), everything's fine, can boot into windows and run applications. This issue still persists with the new bios 131.

---

somebody used dividers already ? i got same problem with ddr333, have to test new bios now. what type of rams do you use ?

psycho303

All the dividers worked fine for me on my board, I tested them with VX memory.

OPP

Usa says boards arriving Tues. :)

Quote:

---

Originally Posted by psycho303

somebody used dividers already ? i got same problem with ddr333, have to test new bios now. what type of rams do you use ?

psycho303

---

flashed 131 now, and it WORKS ! :banana4: can run my mushkins bh5 with 333 divider now ! good work DFI !

CMOS reloaded is one of the most inovative features :toast:

hope cpu/memtest comes soon :)

Quote:

---

Originally Posted by psycho303

somebody used dividers already ? i got same problem with ddr333, have to test new bios now. what type of rams do you use ?

psycho303

---

im using Geil Ultra-X, and the issue is only occuring with multiplier 10, multiplier 9 is working fine with ddr333 divider

I too don't know why everyone is so obsessed with prime and memtest.. Both take way too long, and I normally can't wait more than 5 minutes.. You can have a peace of mind much quicker by running Lobby Hi or SP 1m, then, if you really want to get fancy, you can run a 32m run..

Tictac, are BIOSes in C++? I noticed the #include parameter...

Quote:

---

Originally Posted by OPPAINTER

Quote:

---

Originally Posted by skate2snow

Hey, why you guys all want to go back in DOS?:D

Seriously I dont think we need those. The challenge is to be able to get it stable for the bench, which runs in windows. If it is stable DOS who cares?

---

Well said my overclocking brother :toast:

OPP

---

your idea of overclocking is different from mine. Mine is to get the highest clock while being stable at everything not just a bench to get the top score. I want a clock that performs under everything not just a single app. So im betting u never used prime 95 either, cpu tester would be just like prime 95 taht just doesnt load from windows.

Quote:

---

Originally Posted by P_1

your idea of overclocking is different from mine. Mine is to get the highest clock while being stable at everything not just a bench to get the top score. I want a clock that performs under everything not just a single app. A so im betting u never used prime 95 either, cpu tester would be just like prime 95 taht just doesnt load from windows.

---

:D If You ever tried to run a 3D mark with Ya rig You wouldn't have to give such comments here - or do You think OPP's rig went through it without beeing 100 % stable ???

:toast:

Quote:

---

Originally Posted by HARDCORECLOCKER

:D If You ever tried to run a 3D mark with Ya rig You wouldn't have to give such comments here - or do You think OPP's rig went through it without beeing 100 % stable ???

:toast:

---

err i can run prime 95 while running 3dmark and 3dmark wouldnt even fail while prime does shortly after. In my experiences 3dmark stable doesnt mean your stable in every app.

Quote:

---

Originally Posted by P_1

err i can run prime 95 while running 3dmark and 3dmark wouldnt even fail while prime does shortly after. In my experiences 3dmark stable doesnt mean your stable in every app.

---

:D Hm - never made that experience - thought it always was a hard job to pass 3D mark without any errors........., BTW I use SuperPI to test stability,the quick 1M for a fast check of new settings and 32M in the end.

:toast:

I dont understand you. OPP is one of the biggest overclocker, and you argue with him on the subject of what is overclocking / how to overclocking / which utility to use?

And from another of the biggest overclockers rig (Hipro5 sig...) : If you can read this, then you aren't "well" Overclocked yet...!!!

Quote:

---

Originally Posted by skate2snow

I dont understand you. OPP is one of the biggest overclocker, and you argue with him on the subject of what is overclocking / how to overclocking / which utility to use?

And from another of the biggest overclockers rig (Hipro5 sig...) : If you can read this, then you aren't "well" Overclocked yet...!!!

---

im not arguing about what overclocking is. It is different for everyone, for me it is to get the highest clock while being stable at everything. Not just stable for a bench. Again from my experiences sometimes my system will pass everything except for prime, and it shows later on when files start disappearing out of no where.

Quote:

---

Originally Posted by skate2snow

I dont understand you. OPP is one of the biggest overclocker, and you argue with him on the subject of what is overclocking / how to overclocking / which utility to use?

And from another of the biggest overclockers rig (Hipro5 sig...) : If you can read this, then you aren't "well" Overclocked yet...!!!

---

:D Don't know if he's one of the "biggest" (on avatar he doesn't really look fat), but he's sure one of the greatest....... :toast:

Quote:

---

Originally Posted by HARDCORECLOCKER

:D Hm - never made that experience - thought it always was a hard job to pass 3D mark without any errors........., BTW I use SuperPI to test stability,the quick 1M for a fast check of new settings and 32M in the end.

:toast:

---

yea 1M is more of benching...whreas 8M or higher is to test for stability...

many times i have been able to pass 1M, 2M, even 4M but failed 8M with my ocs.

Lets return back to the DFI shall we? You can discuss overclocking ethics somewhere else. :off:

:D Yep - and always watch Ya MOSFETS at 32M if they're not active cooled - if You have bad luck You'll see some flames coming out.... :toast: