Quote:
Originally Posted by GravediggA
That was what i expected ...
How high do you think it would go at stock voltage ? :confused:
Printable View
Quote:
Originally Posted by GravediggA
That was what i expected ...
How high do you think it would go at stock voltage ? :confused:
In which stores have obtained 0448 SPAW?
I wish a 3200 + for me... :slobber:
Thank you
I'd get the CBBHD 0447SPAW
Broke the 2.7GHz barrier... on air! :D
Alec
Congrats! Now all ya gotta do is break the 32sec 1M superPI and you'll be competitive. :DQuote:
Originally Posted by Alec
on 2.72ghz benchable with 1.44vcore.
at 2.79ghz needs 1.61 strange ha?
does'nt matter,.
Thanks, amilian!Quote:
Originally Posted by amilian
I did manage to run superpi at 2.65GHz with my RAM tightened to CAS2.5 and managed to do it in 34 seconds.
I am considdering buying some nice OCZ VX RAM and possibly a RAM booster. Then I should get superPi results within 32 seconds; I may also be able to get higher FSBs outa my RAM so I could overclock even further.
Another option I am thinking of is getting watercooling or vapour phase change cooling....
Thanks for the feedback,
Alec
Couple questions if you will...Quote:
Originally Posted by chillingdude
What settings are you using? (i.e. 9x300) What RAM?
Where'd you purchase it from and when?
new one
vapo ls ...
http://mitglied.lycos.de/siedl/Winch..._3_7_pi32m.jpg
What stepping etc ?
i think its the sameQuote:
Originally Posted by Mrki
:slobber:
did you sold your 3200+ MPM?? what was the max in your vapo??
But he wrote that it's a new one :P
3200+ MPM dont work with vapo ... but its a damn bad cpu! on air max 2.4ghz
:(
/edit
other spaw ;)
At the moment all the 3200's are pretty much sold out in Australia so I'm looking at a 3000+ for my DFI NF4-Ultra (which comes next week). I've found a 0447 TPCW. Anyone ever heard of/seen this stepping before? Give it a go, or give it a miss. What do you reckon?
3000+
0441 UPEW
XP-90
MSI Neo2 Plat. 1.4 bios
PDP pc3200 XBL
The ram is interesting, I can run 2.5-3-3-10 up to 283MHz, but I can't run any tighter at 241MHz.
31s 1M, 27:57 32M Pi times, and of course, a screenie:
http://www.maplehurst.net/images/pi32.jpg
Update .
a64 3.000+
k8n neo2 platinum
2X256 twinmos
This is my 3000+ 0431 with Hyper 6 and Mushkin Level 2 with OCZ booster.
http://img173.exs.cx/img173/6813/300...erpi32m5xr.jpg
I received my cpu today. That's what i did with it :)
Week 0441
Box cooled
PS. I will try to o/c it more later of course :D
Just got my new Winchetser
ADA3500DIK4BI
CBBHD 0450SPBW
and batch 228
Me too, allthough i don't know about the batch (how do i tell?). Anyway i'm still waiting for the rest of my stuff. Oh and i'm totally new at this stuff wich you probably figured out with this being the first post and all.. Hello! :)Quote:
Originally Posted by Dirt
welcome Deep! enjoy;)
So we have some nice winnies here. I would love to see if any of these 2.7ghz+ oc's would benefit from water cooling. My 3500+ 0437 does 2.7ghz at 1.65 on water. Never tried air cooling but just wondering if water is even helping at all.
Gonna have to pick up a new post week 40 winny anyway. Hopefully I'll get the 2.8ghz+ I have been trying to achieve. I wanna break 30sec super pi. At 31 sec right now.
i am going to run wc cooled when my blocked is milled.
i'll sure post the results and any difference between air and water.
max airstable was about 2750 on 1.45V
this is going to be the block => http://users.telenet.be/jortcollijn/wcblockA64.JPG
I bet 80% are not prime stable.
LOL :wierd:Quote:
Originally Posted by caligula
Somebody knows if a high VBT of 3.32v (normally 1/2 vdimm but the vbt was higher than the vdimm) can kill an A64 or just a big 3.3v line?
An Integrated DDR memory controller is depend on the 3.3v line and vbt???
I dont know if my mb or A64 is dead
Thx