Not few months, more like a year. I'm looking forward to 32nm Bloomfield replacement.
What's up with zombies in games lately?
Printable View
Not few months, more like a year. I'm looking forward to 32nm Bloomfield replacement.
What's up with zombies in games lately?
Zombies are the new black.
Roll on or spray deodorant?
Stick.
What's the holding strength of nylon screws?
That depends on the size of the screws.
What are you "holding" with the screws?
Chipset blocks.
Should I blue the case or leave it stock zinc finish?
Leave it Zinc. For chipset hold down's I used 4/40 x 1 1/2" from home depot for it. I don't know if the nylon will hold up in the long term.
Do you believe in Santa?
NO, (kids please dont read from this point forward) done it a few times :)
Some new toys for christmas or something for the wife? (dont tell both :D)
If you've found the right one you will give her something and you'll get toys in return, so basically you'll have both :DQuote:
Originally Posted by anubis
I've got a presentation about overclocking over at the university. Should I bring my rig?
Bring two, and do a LN2 run.
What should I study in preparation to take an Accounting I final?
Dang, you must be in the coolest study program ever :up:Quote:
Originally Posted by Martijn
Numbers :rolleyes:Quote:
Originally Posted by Bobsama
Ham or Turkey for christmas?
Ham.
Should I buy myself a hard drive, or Grado headphones for my brother?
is a rig in need of a HDD if so then get the hard drive, if not be nice to your brother and get him the headphones.
Should I take a break and get a sub or keep working(hehe like I am now)?
Computer Science... 110 guys (and 3 'girls') just like the ones you'd find over here at XS :DQuote:
Originally Posted by jcool
Dang, they don't give courses like that over here.. Sorry for OT but what do you do there, mostly? Software? hardware? Both?
Another OT... Mr. Slinky, your sig has inspired me to spiff mine up in a similar way ! Working on it in the next few days...
OK, so to get the thread back on topic (why bother around this place ?@!?!?)... I hope you got the sub. I had one today !
When will the current economic slump clear out and how will YOU know when it's happened ?
It'll take a while. It's impossible to evaluate the quality of Obama's job before he's started, it'll be interesting. I'm personally not affected by it at all, I suppose I'll know about it when the whining has stopped. :p: The best way to prevent it from developing is by ignoring it anyways.
Ever tried pineapple juice with vodka? It's not as bad as I thought it might be.
Yes I have mixed vodka with alot of different things. Though I prefer it straight from the freezer.
Acrylìc see through case good or bad?
Bad.
Should I study more for my accounting exam Monday?
Is that really a question either you know it or you don't(remember your formulas)Quote:
Originally Posted by Bobsama
Should I wait for the gigabyte video card or go and get me a cheepey? If I should get me a cheepey, do I get a pci or pci-e?
snag a x300 PCIe off ebay for under $10
Do you get tired of telling people why you have rigs much much faster then there's sitting in your basement not getting touched?
No, I don't have a basement :D
What part (parts?) of your PC are running within spec and exactly like the manual says?
My ram.. well ok their running 34mhz above stock. I'm afraid to kill them as their 4x2gb sticks and not that expensive, don't have hs and I think are pc. :horse:
Maybe to scared as the other kits I got from the same brand all did fine with allot of extra voltage, just think that these are more sensitive and like I said I want them to last me awhile.
The ram in my gf's system is even running below spec, their pc6400 sticks but the max div on i945 makes then run 7xx with 295fsb on a e6600 :sofa:
Actually both don't fall in 'as the manual says so I shouldn't have answerd.
What should I do about my slow running parts :shrug:
Replace them. When will the DFI X58 finally be available? :rolleyes: