Commando Results by Tony and Andre (and others...)

Printable View

Show 100 post(s) from this thread on one page

02-11-2007, 05:36 AM
PcCI2iminal

http://img214.imageshack.us/img214/3...4770mhzfi6.jpg
http://valid.x86-secret.com/show_oc?id=167046

580FSB
http://img53.imageshack.us/img53/547...o580fsbuh9.jpg
http://valid.x86-secret.com/show_oc?id=167047

570FSB
http://img207.imageshack.us/img207/8...1mb4557sk2.jpg

Dice
NB -> stock cooling + 80mm
vcore->1.7v(1.8v didn`t help me)
vNB->1.65v (more is useless)
vFSB->1.5v+ (more = no go)
02-11-2007, 05:45 AM
LittleDevil

Quote:

Originally Posted by PcCI2iminal

thats bad :( ,stock clocks and volts?

Yes all stock :(

regards
02-11-2007, 06:02 AM
dekruyter

PcC..., what I got out of your post, which is great, is that you can drop the multiplier on the E6600 and still get an increadible FSB; I had thought up to now that dropping the multiplier, which adds and additional overclock of the Northbridge, would really hinder overclocking overall.

M
02-11-2007, 06:15 AM
Dani

PcCI2iminal, nice FSB there :)
Did you boot up with 1066 or 1333 strap?
02-11-2007, 06:30 AM
over@locker886

Quote:

Originally Posted by PcCI2iminal

580FSB

570FSB

Dice
NB -> stock cooling + 80mm
vcore->1.7v(1.8v didn`t help me)
vNB->1.65v (more is useless)
vFSB->1.5v+ (more = no go)

It's really strong FSBs from this mobo.

Is this 6600ES, which you beated 4473Mhz on air?
02-11-2007, 06:46 AM
PcCI2iminal

Quote:

Originally Posted by dekruyter

PcC..., what I got out of your post, which is great, is that you can drop the multiplier on the E6600 and still get an increadible FSB; I had thought up to now that dropping the multiplier, which adds and additional overclock of the Northbridge, would really hinder overclocking overall.

M

i like to play with P965 :),we just need a good chip and RAM
02-11-2007, 06:49 AM
Ace-a-Rue

Quote:

Originally Posted by Shark-357

Well mine died after 5min od playing with it...it shuts off and after i powred it i get "CPU Init" and a burned smell...that mosfet looks ok i dont know wth happend...

hmmmmmmmmm...this is a 2nd one that has died!...this is not good "HOUSTON"!:(
02-11-2007, 06:55 AM
PcCI2iminal

Quote:

Originally Posted by Dani

PcCI2iminal, nice FSB there :)
Did you boot up with 1066 or 1333 strap?

1333mhz :)

Quote:

Is this 6600ES, which you beated 4473Mhz on air?

yep

580FSB seems to be the max FSB for my chip ,i obtain the same 580FSB with p5b dlx and single channel did not help
02-11-2007, 06:58 AM
rithina

hmm i got issue booting at 475 fsb alone even i am using 1.7 till 2.025v vmch..by setting my multi at 6.
02-11-2007, 07:01 AM
over@locker886

Quote:

Originally Posted by PcCI2iminal

yep

580FSB seems to be the max FSB for my chip ,i obtain the same 580FSB with p5b dlx and single channel did not help

:stick: I will want WR, I hope will little help LN2 for FSB. Need 600+FSB:slapass:

I got FSB -> 530Mhz(air) -> 556Mhz(vapochill ls) --> 580Mhz (you with dice) -->600Mhz+(Ln2 hope possible,zz)
02-11-2007, 07:10 AM
PcCI2iminal

Quote:

I got FSB -> 530Mhz(air) -> 556Mhz(vapochill ls) --> 580Mhz (you with dice) -->600Mhz+(Ln2 hope possible,zz)

532FSB(P5B DLX air)->537FSB(RD600->chilled air)->580FSB(P5B and Commando-->dice)->???(LN2) hehehe
02-11-2007, 07:21 AM
over@locker886

Quote:

Originally Posted by PcCI2iminal

532FSB(P5B DLX air)->537FSB(RD600->chilled air)->580FSB(P5B and Commando-->dice)->???(LN2) hehehe

pff, and some people have statement cpu haven't got fsb wall..it's craze..
02-11-2007, 07:42 AM
PcCI2iminal

Quote:

Originally Posted by over@locker886

pff, and some people have statement cpu haven't got fsb wall..it's craze..

the same ES and air cooled
518->DS3(screen),522FSB->P5N32-E SLI(Pi1mb),525FSB->P5B-E Plus(Pi1mb),526FSB DQ6(screen)
02-11-2007, 08:34 AM
LittleDevil

PcCI2iminal really nice FSB there, any pics of setup?

regards
02-11-2007, 10:31 AM
xs64

Quote:

Originally Posted by Varsos

Hiouston we've got a problem........

803 bios and 4/5 divider don't mix.Anything from 420 bus and above with 4/5 is a no go - repeat - NO GO!!! No matter what volt or timming combinations the board does not fire up and if it does it goes crazy on and off again.
With 702 i could go all the way up.803 seems to me it's only for hi bus 1:1.

The bad thing is you can't roll back to previous bioses but i'm waiting for Joebar to tell me a way.

Have you tried AFUDOS in DOS mode ?
02-11-2007, 12:21 PM
Dani

PcCI2iminal, what BIOS did you use? :)
02-11-2007, 12:27 PM
syne_24

Quote:

Originally Posted by Varsos

The bad thing is you can't roll back to previous bioses but i'm waiting for Joebar to tell me a way.

You can use ez-flash with the usb thumb drive. It's quick and piece of cake. I never want to touch floppy unless I absolutely have to.
02-11-2007, 12:59 PM
Nanobot

Quote:

Originally Posted by Varsos

Hiouston we've got a problem........

803 bios and 4/5 divider don't mix.Anything from 420 bus and above with 4/5 is a no go - repeat - NO GO!!! No matter what volt or timming combinations the board does not fire up and if it does it goes crazy on and off again.
With 702 i could go all the way up.803 seems to me it's only for hi bus 1:1.

The bad thing is you can't roll back to previous bioses but i'm waiting for Joebar to tell me a way.

You can roll back BIOS using an older Afudos version, this one works:

AFUDOS207
02-11-2007, 02:45 PM
PcCI2iminal

Quote:

Originally Posted by LittleDevil

PcCI2iminal really nice FSB there, any pics of setup?

regards

not this time my friend :(
02-11-2007, 02:47 PM
PcCI2iminal

Quote:

Originally Posted by Dani

PcCI2iminal, what BIOS did you use? :)

i just have tested this board with the 0803
02-11-2007, 03:01 PM
LittleDevil

Really nice results, i hope to get mine from RMA soon.

regards
02-11-2007, 03:09 PM
PcCI2iminal

Quote:

Originally Posted by LittleDevil

Really nice results, i hope to get mine from RMA soon.

regards

:)
this is my second Commando,my first died 3 hrs after the first boot up, only 10 days(RMA)
but my dead P5WDG2 WS Pro --->3 months(RMA)

best of luck for you :)
02-11-2007, 03:31 PM
Ace-a-Rue

i feel your pain, PcCI2iminal;)
02-11-2007, 03:40 PM
PcCI2iminal

Quote:

Originally Posted by Ace-a-Rue

i feel your pain, PcCI2iminal;)

;)
cz i bought the P5WDG2 in Taiwan and I needed to send for Taiwan ,the Commando i bought in JP and my supplier did for me

now my fav board is working very well
http://img142.imageshack.us/img142/8789/prime1fb9.jpg
02-11-2007, 06:45 PM
Ace-a-Rue

sometimes there are easy fixes and other times NOT so easy.:)

Show 100 post(s) from this thread on one page