lol, I saw it now :) btw, whats the max fsb with stock nb cooling? btw do anyone know if my tuniq tower 120 will fit with the Cooler Master BlueIce II nb cooler? they are both big so I'm unsureQuote:
Originally Posted by triple_A
Printable View
lol, I saw it now :) btw, whats the max fsb with stock nb cooling? btw do anyone know if my tuniq tower 120 will fit with the Cooler Master BlueIce II nb cooler? they are both big so I'm unsureQuote:
Originally Posted by triple_A
Sheesh. High-latency RAM doesn't matter. A lack of dual channel doesn't matter. A lack of an onboard memory controller doesn't matter. High-end cooling doesn't seem to matter. Conroe is just flat out ridiculous!Quote:
Originally Posted by gundersausage
hey mr roadster, are you able to boot at 460 x 7?
I can't seem to boot any higher than 455 MHz. It'll restart on POST and reset to defaults.... :stick:
even if i lower the multiplier to 6x, 460 x 6 is not doable :stick:
yes i'm able to boot at 455Mhz from 266Mhz.
But i can boot higher (max 480) if i set 455 or more before.
I hope you understand :)
I think i understand.
From stock (266) you cant directly boot at 480, but you can boot at 455. And if you change from 455 to 480, you can still boot yes?
455/470/475/478/480
476 can cold boot easy when system is stopped normally. I've not tested 478 yet :D
Seems like DS3 is the best deal for now
Till DFI monster arrives :toast:
Are you sure??Quote:
Originally Posted by kiwi
Secret testing:D
________
LovelyWendie
i been telling you guys that loose timings or tight there isnt hardly any difference.
ive shown it too comparing my super cheap ram compared to some really expensive ram at the same clocks but my ram is really lose.
yeah i am not certain that DS3 willl boot at 400fsb wiht 9x multi
There is a post in this thread that said it was successful at that setting.Quote:
Originally Posted by theteamaqua
I also depends if it was software or bios fsb.Quote:
Originally Posted by BottomsUp
Quote:
Originally Posted by mion
he stated it was BIOS
very niceQuote:
Originally Posted by misteroadster
by the way has anyone been able to go past 500fsb?
I'm stuck at max spi 1m at 490 with 0.1v mch
anymore and it locks up
it's either a mobo or mem issue for me as it made no difference between stock vcore and 1.4v
This board looks like a nice step until I see what Nvidia will do for SLi now that AMD/ATi are in bed together.
See how many NON SLi Boards become SLi boards with a simple driver update ;)
sweet.
:thumbsup:
Is everyone on the F3 BIOS?
yep on F3 now after a few days on F1Quote:
Originally Posted by K.I.T.T.
what about you K.I.T.T
what are you on i dont member if u said in ur thread
just ordered my DS4 here, hope it performs well
it brings me into a dilemma of which heatsink to use, I think Golden Orb 2 / Blue Orb 2 are better since they blow air to PWM and NB, not like other heatpipe ones blow norizontally
The stock cooler is too laud can't stand with it more than a day
and the big typhoon is.... dangerous regard to its crappy backplate
Use a coolermaster hyper48... if you disable fan control its really efficient... my overclocked celeron was running at 21 degrees idle and the NB was really cool as well
Anyone used the Arctic cooling chipset cooler? would it be better than the passive Zalman flower chipset cooler
http://pcmaniacs.com.au/product_info...oducts_id=1829
versus
http://pcmaniacs.com.au/product_info...oducts_id=3127
Yep, I'm on F3 :)Quote:
Originally Posted by Gun_Strife
I bought this - copper, and SILENT.Quote:
Originally Posted by gundersausage
http://www.jab-tech.com/product.php?productid=3319
Lots of good reviews on it. It JUST clears my Ultra-120 on the DS3...