L12 mod

#SAE

i have a hard time belief that ypur GT is -63 idle at 2860 MHz @1,93

some thing like this :

http://www.tweak.dk/forum/attachment...fc51b1827b1b77

we all can make :

http://www.tweak.dk/forum/attachment...fc51b1827b1b77

MAX so far is -66

^Maybe his room is cold :p:


So this is useless to do on DFI boards?

Quote:

---

Originally posted by KoGeR|Max
#SAE

i have a hard time belief that ypur GT is -63 idle at 2860 MHz @1,93

some thing like this :

http://www.tweak.dk/forum/attachment...fc51b1827b1b77

we all can make :

http://www.tweak.dk/forum/attachment...fc51b1827b1b77

MAX so far is -66

---

My room is indeed not very warm... then those factory built unit ;) differ in charge and so on... I also have a pic where my new mobile is at -71°C idle at 11.5x257 :D It takes some time. But it can. And additionally you have the stopgrant mode in nb enabled the right way...

I am very sorry if you don't believe me... most of the time with my mobile now it's around -55 to -60°C at 11.5x264 (3024) and 1.93V (vdrop)... load is around -50°C after a while... :thumbsup:

thats a nice system you got there SAE, one of the highest clocked mobiles i've seen, is it 100% stable at 3024 24/7??

#SAE okay... what is your room temp then ?

my is a 2400+ and it is stabil at 3007 MHz 24/7

Quote:

---

Originally posted by KoGeR|Max
#SAE okay... what is your room temp then ?

my is a 2400+ and it is stabil at 3007 MHz 24/7

---

My room temp's around 16°C atm :)

I have average temps of -55°C when room temp is around 22°C+

I have a 2600+ at 3GHz+, but with my fsb it's not fully stable (to do prime longer than 1hour, superpi 32m only works sometimes...)

I could do superpi1m at 240x13 though, as well as pifast :cool:

/edit
P.S. I always run my fans on turbo :D

i use 12 x 230 2-2-2-11 but my board stops me :(

what is your fans on then ? 2200 rpm ?

i use 1300 with a avg temp at -50 c

Quote:

---

Originally posted by KoGeR|Max
i use 12 x 230 2-2-2-11 but my board stops me :(

what is your fans on then ? 2200 rpm ?

i use 1300 with a avg temp at -50 c

---

Yeah. Fans at around 2200rpm but sometimes spinning up and down, not really constantly... maybe a firmware update would fix it???

do you have any "exp." with NF7-S ? i can use :D

Quote:

---

Originally posted by KoGeR|Max
do you have any "exp." with NF7-S ? i can use :D

---

Drop me a PM what you wanna know :D

WOW Sae.. your only 12 marks away from 25k.. squeze that last bit out of your system!

I try I try ... :p:

But I am still trying different drivers... 3.1 were the best ones for me... (I am about trying 3.5, 3.2 and 3.7 :D )

The graphics card is what's holding me back... :(

hi there, i have a question to all those with the XP-M2600+ who passed the 225MHz FSB, which type of cooling do you have? & which vcore do you throw?!
casue i can't pass the 225MHz FSB with my IQYHA, though i reached 12x225MHz @ 1.85v :rolleyes:

11.5x260+ at 2V Vcore... L12 mod, and default wire mod to 1.775V.

not bad! :D using phase change, right?

Quote:

---

Originally posted by naelq
not bad! :D using phase change, right?

---

Yeah. Nventiv Mach2 GT :D

But it's equal what cooling you use according to the achieved fsb...

The wire mods are necessary for reaching high multipliers with high fsbs stably.

Quote:

---

Originally posted by SAE
11.5x260+ at 2V Vcore... L12 mod, and default wire mod to 1.775V.

---

Whats the default wire mod to 1.775v and what does it do (i can guess but wanna make sure)

Quote:

---

Originally posted by fr33ze
Whats the default wire mod to 1.775v and what does it do (i can guess but wanna make sure)

---

the same! :slobber:

It defaults the cpu from 1.45V to 1.775V. It's one strand of wire in the cpu socket as shown here by soundx98:

http://server6.uploadit.org/files/soundx98-Vcoremod.JPG

Only to do the red one.

Quote:

---

Originally posted by SAE
It defaults the cpu from 1.45V to 1.775V. It's one strand of wire in the cpu socket as shown here by soundx98:

http://server6.uploadit.org/files/soundx98-Vcoremod.JPG

Only to do the red one.

---

thought that'd be what it does but why do it, better stability/higher oc??