[Bios 2.0]
I can run (MFRss)1400 11-13-13-31-1T tight subs (1.73v-32M stable) but booting 2933 (divider) is a pipe dream,rising/dropping bclk in bios just .001@1400 will give "23" and a lot of "20"
VCCIO -1.15v @ AUTO it will jump to 1.25v
VCCSA-1.2~1.25v
I really enjoy this board for all my PSC/BBSE but validation with MFRss is a pain
P.S. I did try to bclk 86.5 and 2933 divider with no avail
Nick if you can get me some pointers that would be great
Thanks
Quote:
Originally Posted by XBrytanX
If u see 23 , normally it means that ur imc max out already.
yeap it was maxing out in win/bclk around 1430Quote:
Originally Posted by nickshih
Thank you Nick ,I was just hoping for a bit more :( ..love this board man :up:
@ nick = any update beta bios ? or ?
i7 3770K/Batch: 3251B562
5GHz@1,190V
http://www.kingpic.net/th/5ghz_3251b562.jpg
hi guys!
I have this motherboard with an i7-3770k and i have a strange issue.
With the 3770K oc'ed at 4,7ghz, at 3dmark 11 i have only 7500 points at physics score:(
In other benches, all works perfect, only physics score at 3dmark 11 is extremly low:(
I tried two or three different bios but nothing at all...
I do a format and a clean install of windows 7 but nothing happen again..
Αlso, i tried all 3dmark's 11 versions, but nothing...
I tried the cpu ιn another motherboard and i saw 12500+ points with 3770k at 4,7ghz...
Why this happens??
Does anyone have an idea??
No one knows?:(Quote:
Originally Posted by Dangerous
what memory speed?check bandwith on aida i found it has good influence on 3dm11
Quote:
Originally Posted by Dangerous
what memory module u used ?
3dmark11 has problem with some hynix chips ...
it is known issue .
Hi everyone, especially Mr Nick.
I bought this board, I love it alot, I have one 3770K, nice enough (see printscreens), and I have 2x4Gb Corsair Dominator Platinum 2800Mhz CL 11.14.14.35/2T memory.
From as I know, those mems are Hynix CFR double sided sticks, and I have trouble to run them at more than 2600Mhz.
Not even accept to start on XMP1,3 profile (2800/11.14.14.35/2T/1,65Vdram).
What can I do?
Those mems worked flawles on Asus Z77 Maximus V , even more than 1515 Mhz (3030Mhz).
Thank you.
http://s19.postimg.org/3zlcaaec3/Obraznic.jpg
http://s19.postimg.org/mt757ack3/4800.jpg
Quote:
Originally Posted by DjLeco
i believe that i have no issues with that kits .
what version of bios u used .
Thank you for your fast reply!
I use last bios version from official site, updated directly on bios; version is P2.00 dated 31-01-2013
Τhanks for the help guys!
I tried two different memory modules and work perfect!
Any news, or updates for this lovely board?
Sold Corsair Dominator 2800CL11 Hynix CFR, bought Team Xtreem LV (I think samsung chips) , and keep like this:
http://s19.postimg.org/tnosiyo7j/Ram.jpg
Hi everyone
im having a few problems with the nick shih oc profile.
Now when i select anything over 4.0 i get a blue screen. The whole point of my buying this board was that it was easy to overclock cos it had the Oc profiles.
Is there something that im not doing that i need to do to get it to work???
i have a I5 3570k , g.skill ripjaws- x 8gb 2133, 775w power supply, gtx670sli and all running on a xspc water cooled system
Quote:
Originally Posted by fluek66
Looks like your CPU margin is too low
Can u manually set 40x ratio and Vcore at fixed 1.25 volt ?
have u load XMP ?
Quote:
Originally Posted by nickshih
Hi
Nick
yes i can manually set it up which i just tried. Seems to work :)
yes i have now set up my XMP.
If i was going to try 46 what voltage would u use???
Bios update version 2.30
http://www.asrock.com/mb/Intel/Z77%2...wnload&os=BIOS
Does not seem to add anything other than a change in bios download location...anything else I am missing?
In situation of RAID 0 with two SSD - what controller to use for maximum performance - Intel or Marvell ?
THX
You should use Intel ports for maximum RAID performance.Quote:
Originally Posted by um2802
I think I have a big problem with this board. When I reboot the board powers off for maybe 2-3 sec before it restarts. Also, the last 2 days, the VGA LED is on. I don't have any graphics card just using on-board. I think I need to RMA.
Hi Nick
Hi Guys
I recently Purchased this Board because it can achieve pretty good memory OC.
Any Speed over 2000Mhz in bios at any timings and at any Voltage - I get error code "23".
Could it be that My CPU Imc that weak. Is it defective CPU or I am doing something wrong.
I have G.skill 2x2 GB 1600Mhz 6-8-6-24 PI Sticks - I can run as low as 7-9-7-24 at this speed - aftyer that NO go. JUST error "23".
I have a thread already opened "http://www.xtremesystems.org/forums/showthread.php?287348-Memory-can-t-go-over-2100Mhz-Asrock-Z77-oc-formula-and-G.SKILL-F3-12800CL6D-4GBPI"
I wanted Nicks opininon before I RMA My "wonder" Processor.
Thanks In Advance.
Anybody letting go of this board + 3770k ( ?! )
Intersted in picking up the mobo and the chip if possible to play around with some maximum air overclocking.
hi there guru im in a despirate situation need ur help n guidance
i have a z77 oc formula n it was working flawlsessly with my 3570k till now had touched 4.9ghz
but was running at 4.4ghz for gaming etc
but last night it had an issuei shut it down after usual gaming like anyother night n when in the morning i cranked it up again it gave me 00 error on debug ...
i was wondering what has happened here
so i checked the manual n it said cpu error
so i checked for solutions n i read somewhere to clr cmos ...
i did that
n it booted up fin
but now i cant overclock
alll my profiles r gone
my multi is stuck at 38
my rams cant run faster than 1600
its alll gone i think
bios r back to 2.2 earlier they were at 2.3
i need ur guidance
p[lz dnt say i ve to send it for RMA frown.gif
just quoting few pictures of bios screenies ... copied from another similar article a guy posted on tomshardware
http://www.tomshardware.com/answers/...p-problem.html
Attachment 131587
Attachment 131588Attachment 131589
Attachment 131590