Try enabling "hot plug" in UEFI BIOS on the SATA port that your 1TB HDD is connected to.
-Raja
Printable View
Try enabling "hot plug" in UEFI BIOS on the SATA port that your 1TB HDD is connected to.
-Raja
Plug your 1tb hard drive with the backup into an esata port on backplane of your motherboard. Should pickup just fine and boot into recovery with your win7 cd/usb
Might want to set the controller your cdroms are on to ide see if that makes a difference with them on startup.
Well I plug the 1tb hdd with hot swap enable and if I plug it while I'm on windows it freeze al the system.Quote:
Originally Posted by Raja@ASUS
If I let it plugged and reset, then I can't get further than te log on with the Asus rog.
And another issue is that if I leave as first boot device the optical drive and as second the hdd with the os. The system stays freeze trying to boot with the optical no matter if it doesn't have anything inside. Seems like the bios can't get to the another boot device if the first one didn't boot. That's weird.
And if I left a cd in the optical drive, the system check of it is booteable and if it isn't it goes within 5sec to the another boot device.
Any ideas?
Thanks!
But set the hdd to IDE when they where set from the beginning to ahci won't make any crashes??Quote:
Originally Posted by Ferosin
anyone having issues with AI Suite II, in particular the monitoring? every once in a while i see inaccurate warning alerts pop up in the lower right corner right above the notification area. problem is the warnings aren't true at all. right now it thinks my NF200 voltage is 0.00v. i've seen similar alerts like CPU PLL voltage at 0.00v, one of the case fans at 0 RPM when it clearly was on, and other similar alerts.
if it is only zero volts warning, I saw QPI volts at 1.9, CPU volts at 2.0 volts sometimes... I just deinstalled it... not worth running anyway plus it eats resources...
so what do you use to adjust bclk inside the os? setfsb?Quote:
Originally Posted by Leeghoofd
Do you have any other software open that polls the super io at the same time as ai suite? eg. cpu-z etc...Quote:
Originally Posted by fadetoblack
ROG connect or Turbo V solo install... no idea though why I should adjust Bclock if not benching... and if I bench it's ROG connect or the ROG panel...
yes, evga precision and AIDA64. is that what's causing the issue?Quote:
Originally Posted by Raja@ASUS
AIDA64 I'd imagine - it will probe the IO at the same time and this will cause the values to be misreported.Quote:
Originally Posted by fadetoblack
-Raja
Couple of memory questions.
1. Anyone able to get the 2400 memory option working? I've tried with my GTX3's and it fails to boot, they work fine at 2133 though.
2. GTX2's work very well, but my Dom GT's 2000MHz 7-8-7's hang at either S8 or 58 post code. I would really like to run the C7's for SPI32M.
1. Worked on early ES CPUs only. We left it in place just in case, but it seems Intel pulled that divider.Quote:
Originally Posted by Gunslinger
2. It is DIMM PCB specific as the rev 2.1 DDR3-2200 CAS 8-8-8-24 kits do ok.
-Raja
Got my new CPU.... :D
I love it. Together with the MIVE it just rockz ;)
4000 MHz @ 1.096V
http://www.abload.de/thumb/4000_primestable0j71.jpg
4500 MHz @ 1.208V
http://www.abload.de/thumb/neuer_450...imestaciq7.jpg
5000 MHz @ 1.360V
http://www.abload.de/thumb/neuer_500...imestat840.jpg
batch plss :DQuote:
Originally Posted by GaBBa-Gandalf
can u post some bios settings pls. voltage, vpm etc..Quote:
Originally Posted by GaBBa-Gandalf
tia
I would like to ask...
There is any kind of issue with the Marvell Controller on this board or something like that?
I have a b3 revision and in order to make work all my hdd, even the one from 1tb that I previous said that didn't work. In order to make all of them to work, I had to disable the marvell controller, why is that?
Thanks!
Quote:
Originally Posted by Leeghoofd
ahh I see, thanks for the input
As Raja said the 2400 divider does not work, and out of all of the hypers I have tested on this board none have worked especially well (Corsair, STT) but then again I have never tried the GTX2:shrug:Quote:
Originally Posted by Gunslinger
Here are my bios settings:
http://www.abload.de/gallery.php?key=qxt7OWUM
Batch: L104A419
But not every cpu is that good. batch doesn't say much about oc anymore...
thx mate. it seems u got a great clocker ;)
Thank's to Asus for this fantastic Motherboard::clap:
Next i wil try the new Bios with the Memory tweaker tool !
http://img717.imageshack.us/img717/2172/aida28000.jpg
woow.. great mem clock :D
which bios would u test now ??
Been having issues with this board recently, most of the time when I restart it will just enter BIOS every single time. Even without a keyboard plugged in so that it would be physically impossible for me to hit delete. Also, no errors like cpu fan that would cause it as far as I can tell. Anyone seen anything like this? Happens with both 1204 and 1485 :shrug:
I'm running in to some issues myself... Been running 5Ghz with 1.376v for a long long time, yesterday everything was fine but today I got 45 post error with both bios...