Printable View
Go back a few pages in this thread, you will see pictures of what the new revision is, look for the sticker on your board.Quote:
Originally Posted by psycho303
Lastly follow Tony's advice, and update your bios if it is not the version number Tony refers to.
Hello im new here but I was watching the dfi posts some weeks ago. I have a 3500+ winch and OCZ plat pc3200 rev2 memory and im looking for a mobo,msi neo4 or dfi ultra. This memory dont likes voltage too much, 2,8V max i think. It is worth to take the dfi mobo or msi neo4 is best for me? my heatskink is xp-90 + enermax.
Thx!
where can i find the 126-bios?! i only find the 125...
thx a lot!
Hello to all :D
finally got my account validated :) took a while..anyway I just wanted to say my SLi-DR should be here at home in 30 minutes :D shipped friday
cheers
SiLA
someone told some pages back that is in the taiwan DFI site, go check itQuote:
Originally Posted by LoKi2k
go to the dfi siteQuote:
Originally Posted by LoKi2k
--> download
--> beta site
choose the beta bios for your board
http://www.dfi.com.tw/Upload/BIOS/NF4LD126.exe
http://www.dfi.com.tw/Upload/BIOS/NF4LD126.zip
and the new bios from today
http://www.dfi.com.tw/Upload/BIOS/NF4LD131.exe
http://www.dfi.com.tw/Upload/BIOS/NF4LD131.zip
have someone tested the 131?
is this the bios only for the sli or have they all the same bios? I habe the Ultra not the sli board.
Highly doubtfull, if tested, it is happening right now maybe in the UK (bigtoe) with no official results yet, USA side (OPP or Angry Games - possibly bigtoe if he is in USA this week) the beta tester are mostly in USA California not awake yet, time zone difference.Quote:
Originally Posted by LoKi2k
These are like 12 hours old release.
Asia side maybe, only one I can think off is Onepagebook.
So keep an eye out for post from one of these guys.
Beta site links to same bios irrelevant of SLI or Ultra, so 131 also for Ultra.Quote:
Originally Posted by diamonddog
One thing that makes me worry abot my new SLI-D is the fact that i cant get my cpu working with like 10x275 oder 10x280, 10x275 gives me a bluescreen after a while all of sudden(PFN_LIST_CORRUPT, so seems so refer to the memory, even though i was using divider to rule it out), and 10x280 can't even boot through into windows sometimes showing the sams bluescreen like before :( The cpu is capaple of 2860MHz, so it must be about the board! 10x270 is running primestable. Raising chipset voltage wouldnt do the trick either... so i hope its just a bios issue and a new bios can fix it! It aint about the HTT itself either, because 8x300 is working as well...
perhaps the ram, what is your max with it?
Bios 131 specifically adresses boot issue with certain type of ram, maybe give a go to 131 bios.Quote:
Originally Posted by goddh0r
Quote:
1. Fixed IR connection failure.
2. Fixed Boot failure when installing certain CL2 memory modules.
that could fix my problem too, mushkin bh5 running well @ 250 1:1 1,5-2-2-0 but setting to 300 @ 166 divider = 245 RAM / hangs at device list boot screen. try it today eveningQuote:
Originally Posted by Blindbat
Its scary how many problems there are already, and half the world don't even have it yet. Although I must admit, people are getting better results than the Asus. Let's hope its just the first few batches that has these problems (sorry guys). Although I find it odd that the beta testers didnt seem to have these problems.
Quote:
Originally Posted by situman
Not really. No offense to anyone in specific, but there is no accounting for the experience, skill level, and supporting equipment of those trying out these boards. I always find that I, personally, have much fewer problems with new kit than those folks who report lots of trouble in the early stages.
Heck, even my Asus SLI is a better board than everyone indicated. I bought it as a "fill in" until the DFI showed up, but I've grown to appreciate it a lot. Not the best OCer HTT wise, but a good all around mobo.
Just food for thought.
Beta testers are mostlikely the ones that have identified the problems, contrary to normal procedures they have given us a glimpse off their results, but stated from the start... ~ Beta, hence the work and time invested by them, in order for stable boards to be delivered to us.Quote:
Originally Posted by situman
Hence the delay in shipping boards, and fast maturity of bioses beeing release.
A big thank you to them, and faith in DFI for doing what they do promptly and efficiently.
I am convinced they want to deliver another winner to the market place !
they might get tweak versionQuote:
Originally Posted by situman
:toast:
:confused: I wish I only could be half as optimistic as You...... :toast:Quote:
Originally Posted by Blindbat
At least DFI tries to get it right before shipping. As we all know most don't.
:D Yep - that I also see so far - it depends on the point of view.... :toast:Quote:
Originally Posted by xgman
Im still waiting patiently for these boards to come out and then patiently wait for the prices to drop, lol. Don't really plan to go Nvidia SLI, but I guess I will see what the ATI or even VIA has to offer in terms of "SLI" functionality. Just want a good step-in into the AMD64 world.
so did 131 put memtest and cpu test into the menu or is it still not there?
Still didn't see it yet :mad:Quote:
Originally Posted by P_1