Very nice. :clap::clap::clap::clap: :up:
Printable View
rallyho, i'm sure you could get better temps if your set up was PUMP/RES >CPU>GPU >RAD
Very impressive build pwolfe!!!!!!
EDIT by shazza: Note - putting this comment here since there are a number of posts after this one. The loop order rallyho has is fine, unlikely to be any significant temp gains by changing the loop order.
I'm considering water cooling my system.
Any ideas on a water cooling kit for a noob?
As big as you can fit swiftech mcr rads, Scythe Gentle Typhoons as fans, Laing DDC 3.25 pump, XSPC reservoir with integrated pump top for DDC pump, Primochill Pro LRT tubing 3/8" ID 1/2" OD, Bitspower compression fittings for tubing of that size, two Swiftech MCW-80 universal gpu waterblocks +some unisink or minisinks for gpu mem, EK Supreme HF waterblock for cpu, MDPC sleeving.
And three more advises:
1)don't post such questions here or elsewhere where it's offtopic, but make new thread
2)specify more of your needs, like how silent setup you need, your budget, planned overclock, etc ..
3)start reading sticky threads/guides/FAQs & check worklogs of other builds.
out with the dragon, in with the LEO :)
internal midtower ftw :D still need to repaint the case but not sure when ill get the chance for it
http://i70.photobucket.com/albums/i8...o/IMG_0816.jpg
http://i70.photobucket.com/albums/i8...o/IMG_0813.jpg
Been building this system over the last 6 weeks. Just finished it off for the moment by adding the North bridge block. I would have gone full cover but the heat of the north bridge isnt a bottleneck for me. The CPU heat is the bottleneck. Cant really run it past 4.5Ghz 1.4v Vcore, 1.3v QPI without it going over 85C. Thats with a triple Feser Xchanger. I am in the tropics though.
Specs:
Core i7 980X. RIII Extreme. Dual XFX Black Edition 5970s. Dominator GT 2000Mhz. Soundblaster Extreme Gamer F1. Enermax Revolution 1250W. GSkill Falcon II SSD 128GB OS. 4TB Caviar Blacks 2TB RAID 0, 2TB Storage. Corsair Obsidian 800D. LG BluRay Writer.
Loop 1 CPU NB:
Swiftech MCP655 tachometer (Full Bitspower upgrade kit). Apogee XT. EK-NB Asus HP Plexi. Xchanger Triple with NFP12's. Zalman ZM-MFC3 Fan Controller.
Bitspower 80mm Res. 1x Koolance Filter & No Spill QD.
Loop 2: Crossfire 5970s.
Swiftech MCP655 adjustable (Full Bitspower upgrade kit). Quad Xchanger with NFP12's. Scythe Server Fan Controller. Koolance adjustable rad mount. EK Nickel-Acetyl 5970 Blocks. Bitspower 150mm Res. Koolance Flow Meter. 1x Koolance Filter. 3x Koolance No Spill QD's.
All Bitspower Fittings, besides the QD's. Bitspower Cold Cathodes: 1x 20cm blue. 1x 30cm blue. 1x 20cm UV. 1x 30cm UV.
Red LED Strip 20cm. Also I had to use a whole bunch of extention cables for the fans and the PSU. The rear fans on the Quad Xchanger go to the Scythe fan controller at the front of the case. I have also connected all the extra power to the RIII Extreme. There is two extra 4pin molex on the board for the PCI E. The cables for those were a little difficult to hide as they are badly placed. I havent done any mods to the case or anything else. I managed to fit it all in the way it is.
I think thats everything.
Here are a few pics of my newly water cooled WCG Crunching Monster :)
http://www.straferight.com/photopost/data/802/1111.jpg
http://www.straferight.com/photopost/data/802/034.jpg
http://www.straferight.com/photopost/data/802/043.jpg
Sorry for the poor quality, I am a terrible photographer :lol:
Looks good to me and the pics are crystal!:up:
hey, what CPUs are on the SR2?
Mine has Dual Xeon 5680's both running at 4.2ghz.
owch, I bet that hurt the banks :P
Nice clean build Sl@yerTech
Sl@yerTech
Very nice build mate ,really good ;)
bench table Dimastech Easy 2.5 with full watercool Ybris/mips/2x rads 360
http://www.mice86.fr/Dimastech%20full/IMG_3321.JPG
http://www.mice86.fr/Dimastech%20full/IMG_3324.JPG
http://www.mice86.fr/Dimastech%20full/IMG_3325.JPG
http://www.mice86.fr/Dimastech%20full/IMG_3323.JPG
http://www.mice86.fr/Dimastech%20full/IMG_3322.JPG
:)
Some nice benches!
@laevanira417.
Really nice motherboardwaterblock you have there. It allows for a much cleaner loop. Not a big fan of the colors but it is a very nice clean build.
Love the yellow :eek: :D! Though I think the orange Xigmatek's look a bit out of place.
http://sphotos.ak.fbcdn.net/hphotos-...8_113874_n.jpg
need better pictures lol
http://www.abload.de/img/00254i3.jpg
Lian Li V 351 is still in progress
http://www.abload.de/img/4muiu.jpg
[QUOTE=laevanira417;4443646]SilverStone SST-TJ07B-W
\QUOTE]
integration really interesting compliments
Stradale, nice build, but please tell me that's not a Thermaltake pump/res I see hiding in the bays. If it is, please remove it from your system before it fails on you.
hi friend's this is my Mozart H2o Old Stile Hold Hardware
http://img75.imageshack.us/img75/780...shapertdw3.jpg
http://img223.imageshack.us/img223/6...otanicawy0.jpg
http://img393.imageshack.us/img393/8...tcolarenl0.jpg
I'm still sticking with the sixth sense for Thermaltake Goodness ;).
It is the very essence of the dark side and is very easy to detect once you have been properly trained young padawan. :p:
Actually, I didn't even really notice them until you mentioned it. I just thought it was a NaeKuhesque type picture with nasty flash glare off a pair of Koolance QD. :ROTF:
Hi all. It is my first post on XS, my first watercooling build.
http://img13.imageshack.us/img13/7893/dsc03982pd.jpg
http://img23.imageshack.us/img23/1390/dsc04445y.jpg
http://img820.imageshack.us/img820/2716/dsc04436.jpg
http://img268.imageshack.us/img268/8207/dsc04441u.jpg
Vishezzz - You should find/make something that would help support your video card; it looks very pulled down by the weight of the block and/or the power cables.
It is the res moves down on card edge. I already have corrected it. But small sagging all the same is ((( Advise something!
This is Hydra. I have since moved on from this and am building a rig I will soon make a log for.
http://i337.photobucket.com/albums/n...D/100_2453.jpg
http://i337.photobucket.com/albums/n...D/100_2447.jpg
http://i337.photobucket.com/albums/n...D/100_2457.jpg
http://i337.photobucket.com/albums/n...D/100_2459.jpg
More pics here http://forum.watercoolinguk.co.uk/sh...ighlight=hydra
my first post!! :p:
http://img219.imageshack.us/img219/4946/doneteaser1.jpg
http://img710.imageshack.us/img710/3175/overall4.jpg
http://img202.imageshack.us/img202/6541/overall2.jpg
http://img140.imageshack.us/img140/6793/overall5.jpg
everything packed nicely into a MM Pinnacle 24.. :D
That's it. I NEED a Pinnacle 24 now.
That Epsilon block looks great on your 5970. Very nice build.
Another EK bridge user. I really like the way it blends in, yet pops out in black builds.
another one...
http://fotos.subefotos.com/af9c2beec...1a83ab812o.jpg
My ghetto modded Cosmos Pure!
http://img340.imageshack.us/img340/7443/photo461.jpg
http://img686.imageshack.us/img686/9591/photo459g.jpg
Excuse the picture quality, taken with my Omnia HD.
Mambo500 love the look of that build, but where is the PSU?
[edit]
Found it! DOH!
[/edit]
Still working on the wiring job and adding one more pump. Changed out the GPU for a 5870. But here it is.
Don't mind the pic's there from my phone.
http://i900.photobucket.com/albums/a...g/P4090279.jpg
http://i900.photobucket.com/albums/a...g/P4100329.jpg
http://i900.photobucket.com/albums/a...g/P4100350.jpg
http://i900.photobucket.com/albums/a...g/P4100354.jpg
My just recently completed Lian Li PC-X1000 build. Worklog can be found here. :)
http://img704.imageshack.us/img704/3042/70093242.jpg
http://img130.imageshack.us/img130/5548/75602211.jpg
http://img20.imageshack.us/img20/5751/90275878.jpg
http://img692.imageshack.us/img692/1425/84062402.jpg
Nice setups, converge and knet370.
Awesome stuff knet.
Wow that's one of the first builds using acid green that I actually like. Usually, they look very cheap and unreliable for some unknown reason.
It could be me, but all that res seems to be attached with is de rotary fitting on the GPU. I wonder if it will tip over if you shake the case too much.
sometimes you have to take the necessary risk when you want your build to come out exactly as you planned..the tube from the res going back to the pump prevents or atleast hold the res in place and not tilt.
http://i52.photobucket.com/albums/g4...0/IMG_2894.jpg
heres another rig
http://i52.photobucket.com/albums/g4...0/IMG_2958.jpg
Nice A77B :D I've got a A70F almost exact same layout (case wise) yours is a bit neater than mine though :D
Also first time I've seen your work, good to see the twisted raven layout getting the treatment :up:
lame, but here it is.... sunrise and night shots
http://img810.imageshack.us/img810/6965/sdc15718.jpg
http://img97.imageshack.us/img97/7532/sdc15711.jpg
miptzi:
Nice build
What are those "90 angel" called? (those on the res and pump)
made on derlin plastic.... by Dangerden
http://www.dangerden.com/store/image.php?type=P&id=259
One of the few fully waterblocked Rampage III Genes..
http://i572.photobucket.com/albums/s...ct/Nicejpg.jpg
http://i572.photobucket.com/albums/s...i/Nice3jpg.jpg
http://i572.photobucket.com/albums/s...i/Nice2jpg.jpg
http://i572.photobucket.com/albums/s...ilBabecase.jpg
For some reason the ram looks really nice! as does the rest of the case mind..
Hello
Small update from my PC:
Radiator: EK RAD-480 XT
http://img7.hostingpics.net/pics/355484P1010952r.jpg
http://img7.hostingpics.net/pics/958917P1010958r.jpg
http://img7.hostingpics.net/pics/888162P1010964r.jpg
http://img7.hostingpics.net/pics/815645P1010965r.jpg
latest revision to my build:
http://img266.imageshack.us/img266/4660/61213869.jpg
http://img64.imageshack.us/img64/6878/24889925.jpg
YouTube video:
http://www.youtube.com/watch?v=rABIW7BxfN4
Nice job on your build, soda - but, please repost the pictures in a smaller size - see first post in this thread for image sizes.
Still waiting my Feser F1. :rolleyes:
Some pictures :
http://i1030.photobucket.com/albums/...Y/IMG_0703.jpg
http://i1030.photobucket.com/albums/...Y/IMG_0698.jpg
http://i1030.photobucket.com/albums/...Y/IMG_0702.jpg
http://i1030.photobucket.com/albums/...Y/IMG_0697.jpg
Thanks for resizing your pics, soda. Now we can see your nice work in all its glory :up:
Nice job on the TJ07, CaloSIM.
Throwing in a pic from my hopefully soon finished building of pc :)
http://www.diskusjon.no/index.php?ap...tach_id=377988
http://www.diskusjon.no/index.php?ap...tach_id=377989
First picture is very intimidating... I thought you bought a tank for a second.
[QUOTE=CaloSIM;4456682]Still waiting my Feser F1. :rolleyes:
Did you just flip the tray cover on that coolermaster cdrw face plate? Or did you rub off the logo?
Which dvd drive did you end up using?
My plextor just died, so I need to order a replacement that will work with that face plate?
Hey Jacek... if you decide to get rid of the Tygon branding on the tubing, post another pic, I'd love to see it. You've got such a sweet setup, but the writing is so disturbing.
here is a p180b i built for a friend of mine
http://img208.imageshack.us/img208/7298/etrig.jpg
http://img84.imageshack.us/img84/8733/etrigs.jpg
more antec.. latest version of my p182.
http://i608.photobucket.com/albums/t...si/p182_32.jpg
http://i608.photobucket.com/albums/t...si/p182_34.jpg
niceeee
just temporary in stacker :P, while 800D is beeing modified for more rads :D
http://images5.bilddagboken.se/87/_u...8295b8820b.jpg
"Still waiting my Feser F1"
f1 is bad fluid it left blue gunk in my swiftech gtz after only a few months use