wow that will be awesome my friend :up:Quote:
Originally Posted by jjjc_93
wow that will be awesome my friend :up:Quote:
Originally Posted by jjjc_93
i see you just switched it around for your username:DQuote:
Originally Posted by andressergio
man im not having any luck whatsoever with my UD7 and i3-530:mad:
it has a nice low vid of 1.13v but i can even get 20x200@4000 1600 cl9 to boot:down:
dont know if its the board or the cpu,i need to get another H55M-UD2H to find out.
thank god my E8500 will be here soon,i know i will have better luck with it:up::up:
No time to bench but tossed the E8500 in and booted at 4.56 on second try, should be fun when I get time.
VID is 1.1
I just picked up a QX6850 that is lapped in a trade, so i will be slammin that into the GIG UD3P tomorrow, should be fun to see what it can do...
Quote:
Uruguay claimed their first World Cup semi-final appearance in 40 years after a pulsating 4-2 penalty shootout win over heartbroken Ghana
nice chip system enjoy it :up:Quote:
Originally Posted by systemviper
whats that quote about us ?
andre I still can figure out how to "take a pic" of the bios like you guys have and posted it. I know once you get a screen shoot you can upload it to imageshack and post it . Anyway I changed my settings to mirror Jsquire and it booted fine up to 425FSB. I tried 450 and it wouldn't get past the windows load screen I'm thinking this chip needs more than 1.4Vcore? What do think?
if you mean the bios template scrollbox then this will help you.Quote:
Originally Posted by bignick
just copy and paste and heres how to put it into a scroll box.
first at the bottom of the page where the reply box is,hit the go advance button.
then when your in the advance reply page,up on top of the reply box you can see
the button that looks like this #,click it and you will now see in the reply box this appear.
[code][code]
paste your template between the two [code] boxes and the template will now be inside
a scroll box when you post it.
but if you mean actual pics of you bios screen then you need to upload the pics like you did
and then post the link address to the piscs.
usually a load screen bsod is more Vcore.....Quote:
Originally Posted by bignick
First I get how to post the bios once it's in my pics folder. And I also get how to upload it and post on the thread what I don't get is how to "copy" or "take a pic" and move it into a folder so I can do those things. It might be the most simple step but I just can't get that part. Never done a screen shot of the bios before. But anyway I had to increase Vcore up to 1.5V in the bios to make it stable at 450Mhz and that was to much, I couldn't keep the temps down. It runs 75-76C at 100% load so I guess I'm looking for a new processor now:down: I was hoping to get at least 500Mhz and the chip might do it but not on air.... I'm gonna look for a E8600. Thanks guys
Whats the Vcore droop on these boards anyone measure it yet? And if it's like what the other gigabyte boards are is there a mod? Also what program do you use to measure Vdroop?
you can just take a pic of your bios settings mate and up it hereQuote:
Originally Posted by bignick
http://imageshack.us/
or just use one of the templates posted and edit it and re post
no need to mod anything mate just enable LLCQuote:
Originally Posted by bignick
cheers :toast:
Sergio
you must use a foto camera for actually taking a pic of bios settings screen ... and then download it to your pc and post it to imageshack :)Quote:
Originally Posted by bignick
Been a while since I've updated in this whole thread I gotta catch up; been busy with things lately. I'll try to get on MSN sometime Sergio :) and go Uruguay! :D
To update my board doesn't seem to like frequency latch of 400 and I figured this out after some games were crashing. I ran prime custom 8k and it passed, however blend failed after a few seconds and I even got a BSOD a few times :eek:. It wasn't responding to any bios settings so I changed it to 333 latch and it seems to be fine and stable, it passed both blend and custom 8k now, and no more crashing or nasty BSOD ;) Although, my ram latency shot up 20ns and read times went down, I think this is typical but will it really affect performance in games?
I raised vcore up a tiny bit after Sergio helped me as I was getting BSODs again and I thought I fixed it by doing this; but I guess murphy's law is right. I am running LLC at 1.43125 in bios and I'm pretty sure this is borderline safe for 24/7 as I've been running this for a few weeks but didn't notice instability cause I was just browsing the web for most of that time. I'll try lowering it tommorow and I'm pretty sure it will be fine. Temps are too high for my liking in Prime 8k, it hits 70C and I want to stay under 65C, and this was after reseating with IC7 compound and attaching 2 Gentle Typhoons to the rad in push/pull. Couldn't imagine what temps would have been before :eek:
Hey mate how are you ? true a long timeQuote:
Originally Posted by Dark-Energy
Thanks mate tomorrow we go against my friends of Holland :D
Nice you figured out settings and temps, keep posting and im on msn all day online
Cheers :toast:
Sergio
kagula how are your tests going ?Quote:
Originally Posted by kagula323
hey System any update ? did u get that QX ?Quote:
Originally Posted by systemviper
Finally got my camera back Sergio, this was the new loop I built, currently taking things apart to switch mobo's so its even more of a mess than normal. The bottom cap to the new res has a leak to I turned it upside, works fine now though.
http://img535.imageshack.us/img535/7412/re3.png
Uploaded with ImageShack.us
I like the sideways mounted RAD.
Thanks, it lines up perfect with the vents on my window ac.
wow thats a nice setup Tom want more pics :) i think you need the HX850 will make your cabling much easier :up:Quote:
Originally Posted by OC Nub
:rofl: u say it AC sticked to the rad i guess 1mm :D da perfect cooling machineQuote:
Originally Posted by OC Nub
Thanks Sergio, the cables are a pita but I am use to it.
you where right i like the white tubing :up:Quote:
Originally Posted by OC Nub
Hi all,
Just to let you know that I'm selling all my P45 boards (UD3P, USB3P and MIIF), GSkill PI 9600's and 1296MHz+ capable OCZ reapers.
Details in this thread - further details on my Ebay account
Hopefully any of these in the right hands are bound to go far - all the best :D
hi sergio ... I'm currently searchin' for a P55 mobo to have fun with a good i5 650 I have and joining radaja in the core i3 thread :D ... and nice results ... nice memory u got there :DQuote:
Originally Posted by andressergio